MEO/LEO双层卫星网络中层间链路的连接度分析

作为未来卫星移动通信系统的一个重要的研究方向,提出了一种由MEO卫星和LEO卫星共同组成的双层卫星网络(Double-Layer Satellite Network,DLSN),以更好为用户提供多媒体服务.作为多层卫星网络的一个重要的研究内容,连接不同高度上卫星的层间链路(Inter-Orbit-Links,IOLs)的特性对于整个DLSN网络的性能会有很大的影响.根据所设计的多层卫星网络的星座参数,通过对层间链路几何特性的研究,分析了多层卫星网络中MEO卫星与LEO卫星的连接度性能.采用计算机仿真的方法,给出了层间链路连接度的特性.结果表明,为了提高网络性能,在多层卫星网络中应按照一定参数有选择的建立层间链路,而不是简单的采用视距可见原则建立层间链路.     

基于优化STD法的大飞机垂尾装配界面精加工过程模态参数识别

为减小大飞机垂尾装配界面精加工过程中产生的加工振动对其精加工质量的影响，需掌握装配界面加工过程的动力学特性，而动力学特性与其模态参数密切相关。因此，为获得装配界面各阶模态参数，针对其动态精加工过程，提出了一种优化STD环境激励下结构模态参数识别方法。该方法首先由装配界面的实测加工振动数据构造Toeplitz矩阵，并将其作为STD法的输入，进而求出装配界面各阶次模态参数，并构成模态参数下三角矩阵。然后利用模态置信因子及模态保证准则选出阶次相对稳定的模态参数作为装配界面的真实模态参数。最后，通过切削实验和锤击测试验证优化STD法的正确性和有效性。将锤击实验模态结果作为装配界面的模态参数测量参考值，以一阶模态频率识别结果为例，该方法相比于传统STD法和SSI法，识别精度分别提高了12.71%和3.82%；同理其余各阶模态参数识别精度均有不同程度的提高。通过优化STD法可准确高效地获得装配界面的模态参数，为其精加工工艺参数的合理选择提供了理论依据和技术支持。     

Envelope Estimation of AM Signals Transmitted Through a Randomly Dispersive Medium

The problem of designing a Wiener filter for the optimum processing of amplitude-modulated (AM) signals transmitted through randomly dispersive media is discussed. Results are obtained that provide effective least-mean-squared-error estimation of the input message when errors which do not represent loss of information are neglected. These results, which differ appreciably from the results that obtain from a deterministic analysis, indicate that there are certain values of the propagation parameters which narrow the filter passband to such an extent that estimation is rendered ineffective.     

面向飞机大部件调姿的PPPS机构球铰点中心位置闭环标定方法

PPPS机构球铰点中心位置对飞机大部件调姿精度有重要影响,为了解决当前常用的球铰点中心位置获取方式在精度或效率上的不足,提出一种PPPS调姿机构球铰点中心位置的闭环标定方法。首先,分析了球铰点中心位置误差与运动学逆解时定位器位移求解偏差的关系及大部件位姿变换参数对其的影响;然后,提出了基于关键特性结合奇异值分解几何意义的飞机大部件位姿参数快速求解方法,使位姿参数求解过程更加直观简捷,同时相较于常用的奇异值分解方法在精度上没有损失;利用一次调姿过程前后大部件位姿参数的变化和定位器的位移反馈,结合运动学逆解对球铰点中心的位置进行闭环标定,最后,以某型号飞机垂尾测试件为例验证了所提出方法的正确性和实用性。     

应力比R为常数时细节疲劳额定值（DFR）与其它疲劳参数之间关系研究

为了满足概率疲劳分析的需要,推导出了应力比Ｒ等于常数时细节疲劳额定值（ＤＦＲ）与其它疲劳参数之间的解析表达式,从而使Ｓ－Ｎ曲线解析化。通过焊接件的疲劳试验和分析证明了其有效性和实用性。     

刹车状态下起落架支柱的摆振研究

在研究主起落架支柱在刹车状态下摆振的过程中，我们以双轮支柱式主起落架为例，同时，考虑到了其在纵向振动及扭转振动时自动防滑系统（ABS）的工作情况^[1]。本文在做了一些必要的假设条件下，引入了与起落架机轮，缓冲支柱及减摆器相关的变量和参数，并推导出主起落架刹车机轮振动的数学模型，进而研究与缓冲支柱和机轮参数相关的摆振激发主发生摆振的稳定区域边界。     

Composite control method for stabilizing spacecraft attitude in terms of Rodrigues parameters

In this paper, the attitude stabilization problem of a rigid spacecraft described by Rodrigues parameters is investigated via a composite control strategy, which combines a feedback control law designed by a finite time control technique with a feedforward compensator based on a linear disturbance observer (DOB) method. By choosing a suitable coordinate transformation, the spacecraft dynamics can be divided into three second-order subsystems. Each subsystem includes a certain part and an uncertain part. By using the finite time control technique, a continuous finite time controller is designed for the certain part. The uncertain part is considered to be a lumped disturbance, which is estimated by a DOB, and a corresponding feedforward design is then implemented to compensate the disturbance. Simulation results are employed to confirm the effectiveness of the proposed approach.     

包含旋转矢量的三维湍流模型

对雷诺应力方程中的旋转项进行分析后给出比较合理的模化关系。通过湍流的生成项、耗散项以及旋转项的局部平衡,建立了一个包含旋转矢量在内的各向异性的三维湍流模型。该模型对三维性较弱的剪切流是适切的。对旋转螺旋面及压气机转子叶片上的三维旋转湍流边界层进行了计算。计算结果与实验和C-S模型计算结果比较表明,该模型对近壁参数的预测能力有所改善。另外,该模型形式简单,从表达式本身来看,它相当于Bradshaw模型在三维问题上的推广。     

Prediction of Group Delay Distribution Around Receiving Point Using Modified IRI Model and IGRF Model

The international reference ionosphere (IRI) model is generally accepted standard ionosphere model. It describes the ionosphere environment in quiet state and predicts the ionosphere parameters within a certain precision. In this paper, we have made a breakthrough in the application of the IRI model by modifying the model for regions of China. The main objectives of this modification are to construct the ionosphere parameters foF2 and M (3000) F2 by using the Chinese reference ionosphere (CRI) coefficients, appropriately increase hmE and hmF2 height, reduce the thickness of F layer, validate the parameter by the measured values, and solve the electron concentration distribution with quasi-parabolic segment (QPS). In this paper, 3D ray tracing algorithm is constructed based on the modified IRI model and international geomagnetic reference field (IGRF) model. In short-wave propagation, it can be used to predict the electromagnetic parameters of the receiving point, such as the receiving area, maximum useable frequency (MUF) and the distribution of the group delay etc., which can help to determine the suitability of the communication. As an example, we estimate the group delay distributions around Changchun in the detection from Qingdao to Changchun using the modified IRI model and IGRF model, and provide technical support for the short-wave communication between the two cities.     

飞机侧向运动非线性观测器的研究

本文介绍了几种用来估计飞机侧向运动状态参数——侧滑角β的非线性观测器。地面仿真和试验结果表明,这些观测器结构简单、估计性能好、程序软件简洁易行、计算省时、估计过程迅速,而且具有一定的适应性和抗干扰能力,便于在工程实践中应用。文中详细地给出了各种典型的简化局部非线性观测器的估计方程、原理结构图和部分典型作用下的试验结果。     

基于极值理论的平尾结冰飞行风险评估

提出了结合极值理论与Copula模型来量化评估平尾结冰条件下飞行风险概率的方法。通过建立人-机-环复杂系统模型,对平尾在进近与着陆过程中的结冰情形进行仿真,采用蒙特卡罗法提取平尾结冰极值参数,验证了所提取极值参数符合一维广义极值（GEV）分布,根据飞行风险的定义和相关安全性准则,建立了平尾结冰飞行风险发生的判定条件,计算得出一维极值飞行风险概率;在此基础上选取Copula模型来描述二维极值参数的相关性,对多种Copula模型的未知参数进行辨识,通过拟合优度检验对精度进行验证,得出Joe Copula模型对二维极值分布的描述最为准确,运用Joe Copula模型计算出二维极值飞行风险概率,有效解决了一维极值具有的局限性。所提方法对飞行安全评估等理论有一定参考价值,能为平尾结冰飞行事故的预防提供分析和检验依据。     

一种直升机协同搜潜的阵型最优化方法

分析了两种常用检查反潜阵型的各项参数特点，基于指标化评估搜潜阵型对于任务的合理性，提出了一种选取最优搜潜阵型及参数的方法，并通过示例验证了该方法的可行性。     

基于多元极值Copula的尾流飞行风险概率评估

在尾流问题日益突出的背景之下,结合人-机-环复杂系统建模与多元极值理论,评估遭遇近距近地尾流情形下的飞行风险概率。基于蒙特卡罗法提取尾流极值参数,验证了一维极值参数符合广义极值（GEV）分布;在此基础上提出了二维极值参数的双参数变权重（DPAVW） Copula模型,利用自适应区间粒子群优化（ARPSO）算法对目标函数中的未知参数进行了辨识,拟合优度检验的结果表明DPAVW Copula模型具有比其他Copula模型更高的精度;在利用Copula模型对尾流三维空间中所有二维极值参数进行描述的基础上,求出了每个网格节点上对应的飞行风险概率值,构建了尾流场内二维及三维可视化风险概率图。所提方法是对飞机系统安全性评估理论与方法的有效补充,对于尾流场内的导航控制与风险规避、机场起降的尾流安全间隔改进、环境风险可视化等研究方向有一定的参考价值;同时也适用于不同状况下飞行风险概率的横向对比分析。     

基于CPN的飞机驾驶操纵过程建模及工效分析

驾驶舱人机界面的设计直接关系到飞行员在飞行任务中的操纵表现和飞行安全.分析了飞机驾驶操纵过程中的人机交互特性,基于着色Petri网构建了飞机操纵过程模型并给出了模型的公理化定义.提出了任务可达性,飞行员认知负荷和基于熵值的操纵程序复杂性评估方法,能够实现在驾驶舱设计初期对飞行员认知负荷与操纵过程的分析.结合某型飞机的起飞中断过程给出了操纵过程建模与工效分析实例,表明模型与方法的有效性.     

Modeling Piecewise-Linear Systems by Topological Techniques

Flowgraph techniques are extended to systems with piecewise-linear characteristics by developing criteria for construction of an optimum model from related subregions in which linearity holds. This requires the synthesis of several known techniques and results in a wide range of useful applications including: 1) devices with nonlinear characteristics which may be considered as linear over certain subregions; 2) networks whose response to changes in applied signal frequency or magnitude may be approximated by piecewise-linear asymptotes; 3) systems processing two or more signals simultaneously with different transfer or immitance characteristics for each signal; 4) circuits approximated by different equivalent circuits depending on the numerical values of critical parameters. Representative examples will illustrate these and similar applications. Procedures are presented to provide a logical, orderly, and effective approach to construct a model, to determine figures of merit, and to optimize the model for a prescribed region of operation or for a desired range of parameters.     

Gyro Motion Boundedness under Uncertain Vehicle Spin and Acceleration

An analysis is presented of the motion of a single axis rate gyroscope mounted in a space vehicle, which is simultaneously accelerating and spinning about the output and spin axis, respectively, of the gyro. The time-varying acceleration and deceleration ?x(t) and the spin rate ?z(t) of the vehicle are unknown but bounded functions of time t. It is shown that the motion of the gyro remains bounded if the bound ?*2 on the uncertainty in ?z(t) does not exceed some threshold ?*2 and that this threshold depends on the various parameters of the gyro. Furthermore, by a proper selection of the gyro parameters, its motion can be forced to remain in a small neighborhood (called region of ultimate boundedness) of the origin in ?-? plane after a certain finite interval of time for any bounded uncertain ?x(t) and ?z(t). Analytical relations are derived for the selection of gyro parameters to keep the error caused in the measurement of the input rate due to ?x and ?z within any given limit.     

旋转式SINS的自标校技术研究

惯性器件常值及慢变误差是影响捷联惯导系统精度的主要因素之一,所以在捷联惯导系统出厂前需要对常值及慢变误差参数进行标定。但这些误差参数会随时间发生变化,对于高精度捷联惯导系统,每次启动后需要对惯性器件的误差参数进行重新标校。针对光纤惯导系统,建立了IMU误差模型,并根据提出的旋转式捷联惯导系统自标校转位方案原则设计出了一种8位置自标校方案,对惯性器件标定参数进行激励和辨识,并建立了Kalman滤波状态方程及量测方程,对惯导系统误差参数进行在线标定。实验结果表明,该方案对其惯性器件误差参数能进行准确估计,具有一定的参考价值。     

Design of SIMO Excitation Controllers for Synchronous Generators

Stabilization of synchronous generator oscillations is investigatedby using a single-input multiple-output (SIMO) excitation controller.The feedback signals which are most effective for the damping ofelectromechanical oscillations are selected based on the participationfactors of various signals. In order to improve the dampings ofpoorly damped oscillation modes, the eigenvalues associated withthese modes are shifted to certain prespecified locations by adjustingthe parameters of the excitation controller. Time domain simulationresults are also presented to show the validity of the proposedmethod.     

舰船燃气轮机气路测量参数的理论选择方法

针对舰船燃气轮机气路性能监测诊断的有效性要求,归纳总结了气路测量参数选择要求,提出了1套系统完整的燃气轮机气路测量参数的理论选择方法。在可测量和易测量要求及测试精度要求的初步选择基础上,依次采用影响系数、相关系数和条件数对气路测量参数的敏感性、相关性和诊断误差等进行了分析,最终从理论上选择了某舰船3轴燃气轮机气路性能监测诊断的测量参数。实例表明该理论方法具有一定的通用性和工程应用价值,对燃气轮机气路测量参数的选择有一定的指导作用。     

Gyro Motion Boundedness under Uncertain Angular Acceleration about Vehicle Output Axis

An analysis of the motion of a single-axis rate gyroscope mounted in a space vehicle which has uncertain time-varying acceleration and deceleration ?x(t) about the output axis of the gyro is presented. Using a Lyapunov function, a condition for boundedness of the gyro motion is derived. It is shown that by a proper selection of the parameters of the gyro, its motion can be forced to remain in a small neighborhood (called region of ultimate boundedness) of the origin in ? - ? plane after a certain finite interval of time for any bounded uncertain ?x(t). Analytical relations for the selection of gyro parameters to keep the error caused in the measurement of the input rate due to ?x within desirable limits are derived.