ICAN: A novel laser architecture for space debris removal

The development of a fiber based laser architecture will enable novel applications in environments which have hitherto been impossible due to size, efficiency and power of traditional systems. Such a new architecture has been developed by the International Coherent Amplification Network (ICAN) project. Here we present an analysis of utilizing an ICAN laser for the purpose of tracking and de-orbiting hyper-velocity space debris. With an increasing number of new debris from collisions of active, derelict and new payloads in orbit, there is a growing danger of runaway debris impacts. Due to its compactness and efficiency, it is shown that space-based operation would be possible. For different design parameters such as fiber array size, it is shown that the kHz repetition rate and kW average power of ICAN would be sufficient to de-orbit small 1–10 cm debris within a single instance via laser ablation.     

Compact high-voltage accelerators of charged particles in space experiments

Some general problems of design and application of compact devices for the generation of pulse electric fields at a megavolt range in space experiments are discussed. The prospect of various applications of powerful electron beams for active diagnostics of upper layers of atmosphere, radiation belts and the earth's magnetic field is also reviewed. The proposed development of powerful impulsive devices is dictated by limitations of energy resources in spacecraft together with a need to get a good signal-to-noise ratio for reliable data recording. Compact devices which directly transform electric energy of a low-voltage source (solar batteries, chemical elements, nuclear reactor, etc.), into the energy of a megavolt charge particle beam of high impulsive power appear as reliable means for satisfying these requirements. In this paper, the basic practical schemes of energy transformation procedures are considered and the optimal operation parameters of high-voltage storage and transformer systems are discussed. Proper application of combined high-voltage insulation techniques result in the development of experimental models of heavy-current electron beam accelerators capable of generating beams of 300–500 kV, 3–5 kA, with a pulse duration of 15 × 10⁻⁹ sec at a frequency of 10 Hz. Typical applications of electron beam accelerators including the generator of electron-beam-controlled discharge laser beams are also described.     

L׳ADROIT – A spaceborne ultraviolet laser system for space debris clearing

Small (1–10 cm) debris in low Earth orbit (LEO) are extremely dangerous, because they spread the breakup cascade. Pulsed laser active debris removal using laser ablation jets on target is the most cost-effective way to re-enter the small debris. No other solutions address the whole problem of large (~100 cm, 1 t) as well as small debris. Physical removal of small debris (by nets, tethers and so on) is uneconomical because of the energy cost of matching orbits. In this paper, we present a completely new proposal relative to our earlier work. This new approach uses rapid, head-on interaction in 10–40 s rather than 4 minutes, using 20–40 kW bursts of 100 ps, 355 nm UV pulses from a 1.5 m diameter aperture on a space-based station in LEO. The station employs “heat-capacity” laser mode with low duty cycle to create an adaptable, robust, dual-mode system which can lower or raise large derelict objects into less dangerous orbits, as well as clear out the small debris in a 400-km thick LEO band. Time-average laser optical power is less than 15 kW. The combination of short pulses and UV wavelength gives lower required fluence on target as well as higher momentum coupling coefficient. An orbiting system can have short range because of high interaction rate deriving from its velocity through the debris field. This leads to much smaller mirrors and lower average power than the ground-based systems we have considered previously. Our system also permits strong defense of specific assets. Analysis gives an estimated cost less than $1 k each to re-enter most small debris in a few months, and about 280 k$ each to raise or lower 1-ton objects by 40 km. We believe it can do this for 2000 such large objects in about four years. Laser ablation is one of the few interactions in nature that propel a distant object without any significant reaction on the source.     

激光驱动接力移除空间碎片的小卫星星座及可行性研究

在众多空间碎片移除技术中，天基激光烧蚀驱动是一种高效的、有广阔应用前景的移除技术，特别是针对移除海量的、尺寸在1~10 cm的危险碎片而言，更是具有独特优势。然而，这一技术对高能激光器单脉冲能量、光束质量、发射镜口径等要求很高，目前的硬件水平还达不到实用指标要求，制约了其天基应用。为了克服这些硬件技术障碍，本文另辟蹊径，利用小卫星概念，提出了由不同轨道高度小卫星平台组成小卫星星座，通过在每个小卫星平台上的激光驱动接力来逐步降低碎片轨道高度，最终达到移除空间碎片的小卫星接力移除星座的构想。基于现有的激光器性能参数，根据激光烧蚀驱动碎片动力学模型计算了单个卫星平台的移除能力，结果显示，10 J单脉冲能量激光器和0.5 m直径发射镜，能够对20 km范围内、尺寸小于10 cm碎片进行有效驱动。进而，针对空间碎片密集度高而应用最广的800 km轨道高度区域，设计了由分布在不同轨道高度的30颗小卫星组成接力驱动移除星座系统方案，通过仿真模拟计算验证了星座系统的移除碎片的可行性。该研究利用目前热门的小卫星星座，降低了天基激光移除空间碎片技术对硬件的性能要求，为该技术的应用提供了新的思路和途径，所提出的小卫星接力驱动星座系统方案也有工程参考价值。     

两种激光烧蚀微推力器工作模式的讨论

激光烧蚀微推力器技术是激光推进技术最有可能率先实现工程应用的技术研究方向。作为一种新型的空间推进领域电推进推力器技术,以其系统集成度较高、电功耗较低、冲量元精准等优势特性,在推进性能和系统集成等方面形成鲜明的特色,对于多种空间推进任务具备潜在的应用价值。以激光烧蚀微推力器发展历程为背景,总结提炼当前推力器技术发展趋势,提出了激光烧蚀微推力器目前最具研究价值的两种工作模式,分别对高低比冲两种不同工作模式进行了性能分析和比对,对激光烧蚀微推力器应用前景进行了展望,最后给出了进一步研究的建议。     

Asteroidal resources for space manufacturing

Earth-approaching asteroids (Apollos and Amors) may be competitive candidates as raw materials for space manufacturing. The total energy per unit mass required to transfer material from some of these bodies to high Earth orbit is comparable to that for lunar material. Recent optical studies suggest ordinary and carbonaceous chondrite compositions for these asteroids, with some containing large quantities of metallic iron and nickel, and others, carbon, hydrogen and nitrogen. Discoveries of several new candidate asteroids over the next few years will allow for a better selection of materials and mission possibilities. Material from one of these asteroids, either in raw or manufactured form, could be returned to the vicinity of the Earth by a solar-powered mass-driver reaction engine. With a requirement of ～60 shuttle flights, and with minimal development costs, an automated mission to a 200-m dia. (10⁷ ton) metal-rich asteroid could be carried out by a mass-driver tug assembled in low Earth orbit using shuttle tankage as reaction mass. Such a tug could, within a few years, move the asteroid into high Earth orbit for the manufacturing of ～ 20 satellite power stations using a portion of the asteroid itself as reaction mass. In the next few years over 100 asteroids in this size range could be discovered, orbits determined and composition types classified using existing earthbased and spaceborne search techniques.     

Implications of previous space commercialization experiences for the reusable launch vehicle

In evaluating the prospects for the development of a commercially viable RLV, it may be useful to examine ’lessons learned‘ from previous space commercialization efforts– both those that succeeded and those that did not. It can be argued that several distinct streams of market and technological development may have to converge for successful commercialization of space systems to occur. Factors influencing the prospects for commercialization include the size and growth rate of the potential customer base, the extent to which a governmental customer exists to underpin the market, the development of associated ’value-added‘ markets, the stability of governmental policies, the availability of enabling or enhancing infrastructure, the levels of technological and business risk, and the degree to which competitive markets exist. This paper examines two previous space commercialization experiences, evaluates the relative importance of the various factors that influence the prospects for success of commercialization efforts, and assesses the implications of those factors for the commercial viability of the proposed RLV.     

Early commercial demonstration of space solar power using ultra-lightweight arrays

Space solar power shows great promise for future energy sources worldwide. Most central power stations operate with power capacity of 1000 MW or greater. Due to launch size limitations and specific power of current, rigid solar arrays, the largest solar arrays that have flown in space are around 50 kW. Thin-film arrays offer the promise of much higher specific power and deployment of array sizes up to several MW with current launch vehicles. An approach to early commercial applications for space solar power to distribute power to charge hand-held, mobile battery systems by wireless power transmission (WPT) from thin-film solar arrays in quasi-stationary orbits will be presented. Four key elements to this prototype will be discussed: (1) Space and near-space testing of prototype wireless power transmission by laser and microwave components including WPT space to space and WPT space to near-space HAA transmission demonstrations; (2) distributed power source for recharging hand-held batteries by wireless power transmission from MW space solar power systems; (3) use of quasi-geostationary satellites to generate electricity and distribute it to targeted areas; and (4) architecture and technology for ultra-lightweight thin-film solar arrays with specific energy exceeding 1 kW/kg. This approach would yield flight demonstration of space solar power and wireless power transmission of 1.2 MW. This prototype system will be described, and a roadmap will be presented that will lead to still higher power levels.     

Design and integration of small RTPV generators with new millennium spacecraft for outer solar system

The National Aeronautics and Space Administration’s recently inaugurated New Millennium program, with its emphasis on miniaturized spacecraft, has generated interest in a low-power (10–30 W), low-mass, high-efficiency RTPV (Radioisotope Thermophotovoltaic) power system. This led to a Department of Energy (DOE)-sponsored design study of such a system, which was assigned to OSC (formerly Fairchild) personnel, who have been conducting similar studies of a 75 W RTPV system for the Pluto Express Mission, with very encouraging results. The 75 W design employed two 250 W general purpose heat source (GPHS) modules that DOE had previously developed and safety-qualified for various space missions. These modules were too large for the small RTPVs described in this paper. To minimize the need for new development and safety verification studies, OSC generated derivative designs for 125 W and 62.5 W heat source modules containing identical fuel pellets, clads, impact shell and thermal insulation. OSC also generated a novel heat source support scheme to reduce the heat losses through the structural supports, and a new and much simpler radiator structure, eliminating the need for honeycombs and heat pipes.OSCs previous RTPV study had been based on the use of GaSb PV cells and spectrally selective IR filters that had been partially developed and characterized by Boeing (now EDTEK) personnel. They had supplied us with spectral data on filter reflectivities and cell quantum efficiencies. Two sets of data were furnished: one based on actual measurements made in 1993, and a more optimistic set based on projected performance improvements. Even the measured data set yielded significantly better system performance than present thermoelectric systems, but the projected data yielded much better system performance. Because of these encouraging results, OSC in the fall of 1994 initiated an experimental program at EDTEK to develop improved filters and cells, to demonstrate how much improvement can actually be achieved. OSC requested that first priority be given to filter improvements, because our system studies indicated that improved filters would have a much greater effect on system performance than cell improvements. By July 1995 EDTEK had achieved about 90% of the filter performance improvement projected in 1993. Work on further filter and cell improvements is continuing at EDTEK, as part of a joint effort with OSC and with DOE’s Mound Laboratory to develop and test a prototypic RTPV generator, with both an electrical heater and a radioisotope heat source.The improved filter performance data have been applied to the design of low-power (10–30 W) RTPV power systems, for possible application to new millennium spacecraft for missions to the outer solar system, where solar power generation is impractical. The results reported in this paper indicate that such systems can yield very attractive performance with the RTPV generator integrated with the miniaturized new millennium spacecraft.     

新型大尺度空间微波功率发射阵列的考虑

以空间太阳能电站为应用代表的微波功率传输系统中,微波功率发射阵列是其中的核心组成部分。为保证特定传输距离限制下的波束收集效率,目前国际上多种空间太阳能电站方案中收发天线口径都达到了km级以上。在空间构建大尺度的微波功率发射有源相控阵,面临的主要问题有：发射阵列电性能的高要求、发射阵列折叠状态的总体积限制、大功率发射阵列的热控问题。针对这些问题,文章提出了新型大尺度空间微波功率发射阵列的一些研究及设计考虑,主要包括大尺度阵列同源分发倍频的频率分配方案;高效率高集成功率发射组件技术;大尺度阵列相位同步与误差自校正技术;低剖面天线结构及型面误差补偿技术;大型天线3D打印在轨建造方案设想以及空间微波功率发射阵列热控新思路等。文章提出了新型大尺度空间微波功率发射阵列3个方面的6个主要问题,可为空间太阳能电站系统提供可优化、开放性的设计与发展思路。     

实战天基激光武器系统设计的技术需求分析

本文系根据美国天基激光武器采购能力和结构研究 (A&AS)项目综述的一篇技术报告。文中分析了空军和导弹防御组织 (BMDO)发展天基激光武器 (SBL)所采取的现行技术途径以及为使实战SBL系统投入战场使用所必需的技术需求。A&AS项目确认了需要大力改进当前技术能力的几个重要技术领域 :发展大型展开式光学系统 ,提高波阵面控制和振动控制能力 ,增加激光器功率。最后讨论了还需改进的远程目标捕获、跟踪和指向控制技术 ,空间飞行器的共性技术 ,建模和仿真 ,以及地面试验技术。     

Scenarios which may lead to the rise of an asteroid-based technical civilisation

In a previous paper, the author described a hypothetical development path of technical civilisations which has the following stages: planet dwellers, asteroid dwellers, interstellar travellers, interstellar space dwellers. In this paper, several scenarios are described which may cause the rise of an asteroid-based technical civilisation. Before such a transition may take place, certain space technologies must be developed fully (now these exist only in very preliminary forms): closed-cycle biological life support systems, space manufacturing systems, electrical propulsion systems. After mastering these technologies, certain events may provide the necessary financial means and social impetus for the foundation of the first asteroid-based colonies. In the first scenario, a rich minority group becomes persecuted and they decide to leave the Earth. In the second scenario, a "cold war"-like situation exists and the leaders of the superpowers order the creation of asteroid-based colonies to show off their empires' technological (and financial) grandiosity. In the third scenario, the basic situation is similar to the second one, but in this case the asteroids are not just occupied by the colonists. With several decades of hard work, an asteroid can be turned into a kinetic energy weapon which can provide the same (or greater) threat as the nuclear arsenal of a present superpower. In the fourth scenario, some military asteroids are moved to Earth-centred orbits and utilised as "solar power satellites" (SPS). This would be a quite economical solution because a "military asteroid" already contains most of the important components of an SPS (large solar collector arrays, power distribution devices, orbit modifying rocket engine), one should add only a large microwave transmitter.     

220GHz行波管设计与工艺实验研究

针对目前系统应用对于220GHz频段的大功率辐射源的需求,文章设计了一种折叠波导行波管,在215GHz～225GHz的带宽范围内能够输出10W以上的功率,增益大于25dB。通过模拟计算确定了折叠波导高频电路、注波互作用、电子光学系统以及输能窗等主要部件的设计尺寸,并加工了折叠波导高频电路样品,对制造工艺进行研究。     

面向航空航天应用的太赫兹真空电子学源

太赫兹（THz）科学与技术是近年来国际学术研究的前沿和热点,而THz辐射源则是制约THz科学与技术发展的关键因素之一。基于真空电子学的THz源具有功率大和效率高等优势,特别是扩展互作用器件（EIO／EIA）、返波振荡器（BWO）、行波管（TWT）等都可发展为紧凑型的THz源,适合机载和星载平台应用;而回旋电子器件和自由电子激光等则具有高功率的优势,在陆基或海基平台上具有重要的应用潜力。文章在介绍THz波在航空航天领域相关应用的基础上,着重介绍了各种THz真空电子学源的发展水平。     

Space technology transfer: Spin-off cases from Japan

Government organizations have to justify high expenditure during periods of financial crisis such as the one we are experiencing today. Space agencies have attempted to increase the returns on their investments in space missions by encouraging the commercial use of advanced technologies. This paper describes two technology transfer (TT) cases promoted by JAXA, in order to identify the organizational models and determinants of TT. The development of a TT process from space to Earth not only benefits the aerospace industry but also the network of national companies. The aim of the paper is to investigate who the actors are and the nature of their role, as well as the determinants of the TT process in the Japanese space sector. The case studies confirm the typical path of transfer as ‘Earth–space–Earth’.     

Space science innovation: How mission sequencing interacts with technology policy

Innovation is fundamental to a space agency's mission. Yet, the industry's current dominant approach to new technology development – concerted investment in step-changes in capabilities to support a particular application – contradicts the conventional wisdom of innovation theory. In order to understand why, this paper uses a unique empirical case study, in which exogenous historical circumstances created unexpected additional opportunities for technology investment, to explore the merits of this approach. The value of follow-on periods of R&D is assessed in terms of simple marginal returns, implications for workforce dynamics and the interaction of mission sequencing and technology strategy. The analysis reveals an important contingency between mission paradigm and the value of follow-on investment. Specifically, while marginal performance improvements can be achieved at lower costs, their value depends on the availability of an appropriate mission opportunity. In the current paradigm, the risk of obsolescence is high compared to the potential benefit. However, if a new small mission, frequent flights, paradigm were to take hold, there may be great value in refocusing R&D strategy on later round improvements.     

Space and maritime security–strategies for countering the pirates

Following previous work on space and internal security as part of the European Space Policy Institute's (ESPI) Space and Security programme, ESPI initiated a workshop dealing with an issue of high political as well as public concern – using space as an instrument in the broader strategic context of maritime security – together with the Austrian Institute for European and Security Policy (AIES), which has special expertise in security matters related to Europe. Over 50 high-ranking professionals took part in the 30 November 2009 event, “Space and Maritime Security - Strategies and Capabilities to Counter Piracy”, held at the Austrian Chamber of Commerce (WKÖ) in Vienna. The use of space assets for maritime security has moved up the political agenda as a result of the reliance of the EU ATALANTA NAVFOR mission on services and data provided by the European Union Satellite Centre (EUSC). The workshop therefore addressed technological capabilities as well as industrial approaches in the context of the political framework conditions. It provided a dialogue between space and non-space security communities.     

A new space vision for NASA—And for space entrepreneurs too?

Despite its scientific successes, NASA has over the past two decades lost its way, spending billions of dollars on transportation systems that have at bottom been failures. President Obama's cancellation of the costly and unwieldy Constellation program provides an opportunity for genuine reform of the agency and the US space program, through harnessing the innovatory and cost-effective power of commercial entrepreneurs. Examples of the kinds of project they might undertake – including solar power satellites, ‘space taxis’ and a space elevator – are discussed.     

国外自主交会测量敏感器技术发展趋势

基于空间任务的高可靠性要求,在传统传感器通过技术改进等方式提升性能的同时,新型探测传感器逐渐进入人们的视野。结合国外自主交会任务,通过介绍自主交会敏感器的发展历程,分析了未来交会对接敏感器的发展方向。     

40 keV质子辐照对HfO2/SiO2高反射薄膜激光损伤性能影响试验研究

在低地球轨道，低能质子辐照是造成空间光学元器件损坏的重要因素之一。激光高反射薄膜是空间激光系统中激光产生和输出部件的重要组成部分，其激光损伤性能变化直接影响激光系统的稳定性。文章采用地面空间环境模拟装置模拟低能（40 keV）质子单独作用效果，通过定点原位测量技术和光热吸收测试获得薄膜的光谱透射率、表面形貌和光热吸收特性，采用激光损伤阈值测量方法表征微小初始破坏的激光损伤阈值及损伤形貌；结合SRIM程序模拟计算粒子在材料中输运的具体过程，定量分析过程中的能量损失情况。试验结果表明，40 keV质子辐照会造成HfO₂/SiO₂三波段高反膜的激光损伤阈值明显降低。