我国小行星探测发展思路及关键技术探讨

介绍了国外小行星探测的发展状况,指出小行星探测正从飞越和伴飞探测向表面软着陆取样返回探测发展,从无人探测向载人探测发展,向多目标探测以及与新技术验证相结合的发展趋势和特点。提出我国小行星探测应分4步走的发展规划和发展思路建议,并论述了小行星探测包括载人小行星探测需要解决的轨道设计、自主采样等关键技术。以上建议和研究可为我国制定小行星深空探测战略规划提供参考。     

航天器环绕小行星Ivar的运动分析

将小行星Ivar近似为三轴椭球体，给出了非球形引力势函数，建立了航天器环绕小行星Ivar的轨道动力学方程。利用Jacobi积分常数绘制了航天器在Ivar周围的零速度曲线，并分析了航天器的可能运动区域，给出了航天器不碰撞小行星Ivar的边界条件及不同偏心率下的近拱点半径。分析了小行星Ivar扁率和椭率对环绕轨道的影响，数学仿真结果表明：在一个轨道周期内，顺行轨道的开普勒能量、轨道角动量、偏心率和近拱点半径变化较大，而逆行轨道的相应参数变化较小。     

Comparative investigation of methods for the numerical prediction of motion of asteroids that approach the Earth: Example of the 99942 Apophis asteroid

Using the 99942 Apophis asteroid (currently known as one of the most dangerous asteroids that is approaching the Earth) as an example, we estimate the error of predicting its motion with the use of several integrators over the time interval from 2012 to 2029. The minimum distance (and its error) between the Earth’s center and Apophis was estimated for the rendezvous moment on April 13, 2029. It is shown that this error for various integrators is comparable in the order of magnitude with the influence of certain components of the dynamic model of motion, such as, for example, the influence of harmonics of the Earth’s gravitational filed, solar-light pressure, the Jarkowski effect, etc.     

About one problem of trajectory optimization

The optimization problem for trajectories of spacecraft flight from the Earth to an asteroid is considered in this paper. The flight is realized in the central Newtonian gravitational field of the Sun with a possibility of gravitational maneuvers near planets. Perturbation maneuvers are taken into account using the method of point area of action with a limitation on the flyby altitude. The spacecraft is controlled by changing the value and direction of the engine thrust. The problem is solved taking into account constraints on the launch time, flight duration, and minimum distance to the Sun.     

Scenarios which may lead to the rise of an asteroid-based technical civilisation

In a previous paper, the author described a hypothetical development path of technical civilisations which has the following stages: planet dwellers, asteroid dwellers, interstellar travellers, interstellar space dwellers. In this paper, several scenarios are described which may cause the rise of an asteroid-based technical civilisation. Before such a transition may take place, certain space technologies must be developed fully (now these exist only in very preliminary forms): closed-cycle biological life support systems, space manufacturing systems, electrical propulsion systems. After mastering these technologies, certain events may provide the necessary financial means and social impetus for the foundation of the first asteroid-based colonies. In the first scenario, a rich minority group becomes persecuted and they decide to leave the Earth. In the second scenario, a "cold war"-like situation exists and the leaders of the superpowers order the creation of asteroid-based colonies to show off their empires' technological (and financial) grandiosity. In the third scenario, the basic situation is similar to the second one, but in this case the asteroids are not just occupied by the colonists. With several decades of hard work, an asteroid can be turned into a kinetic energy weapon which can provide the same (or greater) threat as the nuclear arsenal of a present superpower. In the fourth scenario, some military asteroids are moved to Earth-centred orbits and utilised as "solar power satellites" (SPS). This would be a quite economical solution because a "military asteroid" already contains most of the important components of an SPS (large solar collector arrays, power distribution devices, orbit modifying rocket engine), one should add only a large microwave transmitter.     

Generalized restricted circular three-body problem as a model for dynamics of binary asteroids

Exploration of the Solar System has recently revealed the existence of a large number of asteroids with satellites, which has stimulated interest in studying the dynamics of such systems. This paper is dedicated to the analysis of the relative motion of a binary asteroid. The conditions of existence of such a system (i.e., when its components do not run away) are derived in the Introduction. Then it is assumed that the satellite has no significant effect on the motion of the main asteroid, the latter being modeled as a dumbbell-like precessing solid body. The equations of motion of this system are a two-parameter generalization of the corresponding equations of the restricted circular three-body problem. It is demonstrated that in the system under consideration there exist steady-state motions in which the small asteroid is equidistant from attracting centers at the ends of the dumbbell (an analog to triangle libration points). The conditions of existence of such motions are derived, and the positions with respect to the dumbbell are analyzed in detail. Examination of the stability of the triangle libration points is reduced to investigation of a characteristic equation of the sixth degree. The stability conditions are derived in the case when the main asteroid executes near-planar motion.     

Analysis of the orbital motion of the asteroid Apophis’ satellite

We have analyzed the orbital disturbed spacecraft motion near an asteroid. The equations of the asteroidocentric spacecraft motion have been used with regard to three perturbations from celestial bodies, the asteroid’s nonsphericity, and solar radiation pressure. It has been shown that the orbital parameters of the main spacecraft and a small satellite with a radio beacon can be selected such that the orbits are rather stable for a fairly long period of time, i.e., a few weeks for the main spacecraft with an orbit initial radius of ~0.5 km and a few years before approaching Apophis with the Earth in 2029, for a small satellite at an orbit initial radius of ~1.5 km. The initial orientation of the spacecraft orbital plane perpendicular to the sunward direction is optimal from the point of view of the stability of the spacecraft flight near an asteroid.     

Tether assisted near earth object diversion

Potential earth impact threats posed by asteroids have motivated researchers to find effective NEO diversion techniques. Several means to perturb the motion of an asteroid have been discussed in the literature. Attaching a long tether and ballast mass to the asteroid can effectively alter its trajectory. In this paper it is shown that by cutting the tether at an appropriate time the diversion can be enhanced. The instant of cutting the tether significantly affects the final orbit of the asteroid and thus the resulting deflection from the original path.     

Asteroidal resources for space manufacturing

Earth-approaching asteroids (Apollos and Amors) may be competitive candidates as raw materials for space manufacturing. The total energy per unit mass required to transfer material from some of these bodies to high Earth orbit is comparable to that for lunar material. Recent optical studies suggest ordinary and carbonaceous chondrite compositions for these asteroids, with some containing large quantities of metallic iron and nickel, and others, carbon, hydrogen and nitrogen. Discoveries of several new candidate asteroids over the next few years will allow for a better selection of materials and mission possibilities. Material from one of these asteroids, either in raw or manufactured form, could be returned to the vicinity of the Earth by a solar-powered mass-driver reaction engine. With a requirement of ～60 shuttle flights, and with minimal development costs, an automated mission to a 200-m dia. (10⁷ ton) metal-rich asteroid could be carried out by a mass-driver tug assembled in low Earth orbit using shuttle tankage as reaction mass. Such a tug could, within a few years, move the asteroid into high Earth orbit for the manufacturing of ～ 20 satellite power stations using a portion of the asteroid itself as reaction mass. In the next few years over 100 asteroids in this size range could be discovered, orbits determined and composition types classified using existing earthbased and spaceborne search techniques.     

载人小行星探测的任务特点与实施途径探讨

介绍了载人小行星探测的发展现状,对目前美国基于"猎户座"飞船的载人小行星探测的概要方案进行了描述,包括探测器系统组成、运载火箭和飞行方案等内容。从速度增量、目标星引力等方面,分析了载人小行星探测的任务特点,并与载人火星探测、载人月球探测以及无人小行星探测的任务特点进行了比较。给出了载人小行星探测的实施途径建议,包括目标星选择、载人飞船系统设计等。讨论了其所涉及的推进、星际飞行安全保障、小行星表面行走等关键技术。研究结果可为我国开展载人深空探测提供参考。     

Working and walking on small asteroids with circumferential ropes

The low gravity of a small asteroid would present a challenge for an astronaut attempting to work on its surface. Extravehicular activities (EVAs) of the sophistication of the Apollo Moon missions are not likely to be possible if astronauts attempt to walk freely on the asteroid, hover above its surface, or anchor locally into the regolith. Manipulating large rocks, drilling, and excavating at multiple locations is a high priority science objective, but would be difficult without a hold-down mechanism. If the asteroid has even a small rotation rate, maneuvering precisely over its surface could be cumbersome. A plausible means of conducting complex EVAs is to tie ropes entirely around the asteroid, under which the astronaut is pushed downward onto the asteroid surface by the tension in the rope. The downward force provides an artificial gravity that permits the astronaut to drill, excavate, hammer, and carefully document materials on the surface without the worry of being thrown from the asteroid. An astronaut could also use the ropes as handholds or guides to maneuver freely over the surface.     

Working and walking on small asteroids with circumferential ropes

The low gravity of a small asteroid would present a challenge for an astronaut attempting to work on its surface. Extravehicular activities (EVAs) of the sophistication of the Apollo Moon missions are not likely to be possible if astronauts attempt to walk freely on the asteroid, hover above its surface, or anchor locally into the regolith. Manipulating large rocks, drilling, and excavating at multiple locations is a high priority science objective, but would be difficult without a hold-down mechanism. If the asteroid has even a small rotation rate, maneuvering precisely over its surface could be cumbersome. A plausible means of conducting complex EVAs is to tie ropes entirely around the asteroid, under which the astronaut is pushed downward onto the asteroid surface by the tension in the rope. The downward force provides an artificial gravity that permits the astronaut to drill, excavate, hammer, and carefully document materials on the surface without the worry of being thrown from the asteroid. An astronaut could also use the ropes as handholds or guides to maneuver freely over the surface.     

同步双小行星系统共振轨道设计

研究了同步双小行星系统中共振轨道的设计方法及演化规律。首先，基于双椭球模型建立探测器运动方程，并给出共振轨道初值选取方法。然后，利用改进并行打靶法，提出一种双小行星系统平面共振轨道两步修正方法。同时结合稳定性理论及分岔理论，给出双小行星系统三维共振轨道生成和延拓方法；最后，以双小行星系统1999KW4为例，设计了共振比为1∶1,1∶2,1∶3,1∶4,2∶3的平面和空间共振轨道族，并分析了共振轨道的特性及轨道周期和轨道能量的变化规律。给出的双小行星系统中共振轨道的设计方法具有普适性，对未来双小行星系统探测任务中的轨道设计具有一定的参考意义与借鉴价值。     

Optimal thrust program for deviating an Earth-pointing asteroid

The purpose of this study is to investigate the optimal thrust program for deviating an asteroid when it is flying directly toward or crossing the Earth. Under some assumptions, the problem can be considered as a two-body problem of Earth-asteroid system. The initial relative speed and distance are specified to be 10 km/s and 150 times of Earth's radius, respectively. We have about 1 day (or, 93681 seconds exactly) to take action. If a single impulse is applied to the asteroid at the specified initial point, the required impulse to obtain a miss distance of 2 times of Earth's radius is 169.5 m/s per kg mass. For an asteroid of 10 m in diameter, the total impulse required is 3.02 × 10⁸ m/s. It needs a typical large launching rocket to provide the total impulse. When the asteroid is larger or the initial distance is shorter, the number of launching rockets required increases rapidly. For further analysis with physical and engineering constraints imposed, we shall have to use the variational formulation method.     

Human spaceflight and an asteroid redirect mission: Why?

The planning of human spaceflight programmes is an exercise in careful rationing of a scarce and expensive resource. Current NASA plans are to develop the new capability for human-rated launch into space to replace the Space Transportation System (STS), more commonly known as the Space Shuttle, combined with a heavy lift capability, and followed by an eventual Mars mission. As an intermediate step towards Mars, NASA proposes to venture beyond Low Earth Orbit to cis-lunar space to visit a small asteroid which will be captured and moved to lunar orbit by a separate robotic mission. The rationale for this and how to garner support from the scientific community for such an asteroid mission are discussed. Key points that emerge are that a programme usually has greater legitimacy when it emerges from public debate, mostly via a Presidential Commission, a report by the National Research Council or a Decadal Review of science goals etc. Also, human spaceflight missions need to have support from a wide range of interested communities. Accordingly, an outline scientific case for a human visit to an asteroid is made. Further, it is argued here that the scientific interest in an asteroid mission needs to be included early in the planning stages, so that the appropriate capabilities (here the need for drilling cores and carrying equipment to, and returning samples from, the asteroid) can be included.     

Assessment on the feasibility of future shepherding of asteroid resources

Most plausible futures for space exploration and exploitation require a large mass in Earth orbit. Delivering this mass requires overcoming the Earth's natural gravity well, which imposes a distinct obstacle to any future space venture. An alternative solution is to search for more accessible resources elsewhere. In particular, this paper examines the possibility of future utilisation of near Earth asteroid resources. The accessibility of asteroid material can be estimated by analysing the volume of Keplerian orbital element space from which Earth can be reached under a certain energy threshold and then by mapping this analysis onto an existing statistical near Earth objects (NEO) model. Earth is reached through orbital transfers defined by a series of impulsive manoeuvres and computed using the patched-conic approximation. The NEO model allows an estimation of the probability of finding an object that could be transferred with a given Δv budget. For the first time, a resource map provides a realistic assessment of the mass of material resources in near Earth space as a function of energy investment. The results show that there is a considerable mass of resources that can be accessed and exploited at relatively low levels of energy. More importantly, asteroid resources can be accessed with an entire spectrum of levels of energy, unlike other more massive bodies such as the Earth or Moon, which require a minimum energy threshold implicit in their gravity well. With this resource map, the total change of velocity required to capture an asteroid, or transfer its resources to Earth, can be estimated as a function of object size. Thus, realistic examples of asteroid resource utilisation can be provided.     

High-resolution simulations of the final assembly of Earth-like planets. 2. Water delivery and planetary habitability

The water content and habitability of terrestrial planets are determined during their final assembly, from perhaps 100 1,000-km "planetary embryos " and a swarm of billions of 1-10-km "planetesimals. " During this process, we assume that water-rich material is accreted by terrestrial planets via impacts of water-rich bodies that originate in the outer asteroid region. We present analysis of water delivery and planetary habitability in five high-resolution simulations containing about 10 times more particles than in previous simulations. These simulations formed 15 terrestrial planets from 0.4 to 2.6 Earth masses, including five planets in the habitable zone. Every planet from each simulation accreted at least the Earth's current water budget; most accreted several times that amount (assuming no impact depletion). Each planet accreted at least five water-rich embryos and planetesimals from the past 2.5 astronomical units; most accreted 10-20 water-rich bodies. We present a new model for water delivery to terrestrial planets in dynamically calm systems, with low-eccentricity or low-mass giant planets-such systems may be very common in the Galaxy. We suggest that water is accreted in comparable amounts from a few planetary embryos in a " hit or miss " way and from millions of planetesimals in a statistically robust process. Variations in water content are likely to be caused by fluctuations in the number of water-rich embryos accreted, as well as from systematic effects, such as planetary mass and location, and giant planet properties.     

Space missions for SETI.

Radio Telescopes for SETI searches are less demanding than general purpose astronomical radio telescopes. This provides an opportunity to exploit economical approaches in designing SETI systems. Radio Telescopes in low Earth orbit offer no discernible advantages to SETI; indeed, they probably would perform more poorly than a telescope in any other location. Telescopes in geosynchronous orbits would be sufficiently far from Earth to mitigate greatly the deleterious effect of human radio transmissions. Telescopes on the far side of the moon would be superb both from a radio interference standpoint, and from a civil engineering standpoint. Single-reflector telescopes as large as 50 kilometers in diameter could be constructed with conventional materials. However, their costs appear prohibitive. The asteroid belt and the outer solar system are unpromising places to place a large radio telescope. Perhaps the ultimate radio telescope would utilize the sun as a gravitational lens, focusing radiation on free-flying 10-meter class or possibly larger radio telescopes located at distances of the order of 1000 A.U. from the sun. Such a combination has an energy collecting area at 10 centimeters wavelength equivalent to that of a radio telescope about 11 kilometers in diameter, or of the order of 3000 Arecibo radio telescopes. Such a system could detect transmitters with EIRP of the order of a gigawatt at a distance of the order of the distance to the galactic center.     

Optimization of space orbits design for Earth orbiting missions

In Earth orbiting space missions, the orbit selection dictates the mission parameters like the ground resolution, the area coverage, and the frequency of coverage parameters. To achieve desired mission parameters, usually Earth regions of interest are identified and the spacecraft is maneuvered continuously to visit only these regions. This method is expensive, it requires a propulsion system onboard the spacecraft, working throughout the mission lifetime. It also requires a longer time to cover all the regions of interest, due to the very weak thrust forces compared to that of the Earth's gravitational field. This paper presents a methodology to design natural orbits, in which the regions of interest are visited without the use of propulsion systems, depending only on the gravitational forces. The problem is formulated as an optimization problem. A genetic algorithm along with a second order gradient method is implemented for optimization. The design process takes into consideration the gravitational second zonal harmonic, and hence allows for the design of repeated Sun-synchronous orbits. The field of view of the payload is also taken into consideration in the optimization process. Numerical results are presented that demonstrates the efficiency of the proposed method.     

System design of the Hayabusa 2—Asteroid sample return mission to 1999 JU3

The Japan Aerospace Exploration Agency is currently developing the second asteroid sample return mission, designated as Hayabusa 2. Following the successful return of Hayabusa from the asteroid “Itokawa”, Hayabusa 2 is designed as a round-trip mission to the asteroid “1999 JU3”. The 1999 JU3 is a C-type asteroid, which is believed to contain organic matter and hydrated minerals. Thus, it is expected that successful sample collection will provide additional knowledge on the origin and evolution of the planets and, in particular, the origin of water and organic matter. The current mission scenario will enable the spacecraft to reach 1999 JU3 in the middle of 2018 and perform an asteroid proximity operation for 1.5 years. Three touch downs for sampling and one 2-m-class crater generation by means of a high-speed impact operation are planned during the asteroid proximity operation. The samples are to be brought back to the Earth by a re-entry capsule. The present paper describes the system design of Hayabusa 2, some key technical challenges of the mission, and the development status.