Application of WorldView-3 imagery and ASTER TIR data to map alteration minerals associated with the Rodalquilar gold deposits,southeast Spain

The Rodalquilar epithermal quartz-alunite gold deposits that occur within the Rodalquilar caldera complex in southeast Spain, are associated with a pronounced hydrothermal alteration of the country rocks. The hydrothermal alteration zones that are exposed on the surface consist of the vuggy silica zone, the advanced argillic alteration zone, the intermediate argillic alteration zone, the propylitic alteration zone, and a second stage supergene acid sulfate alteration. High spatial resolution multispectral imagery recorded by the WorldView-3 satellite was used in this study to map the spatial distribution of the main alteration minerals in the Rodalquilar caldera complex. Thermal infrared (TIR) data of the ASTER satellite were used to detect the quartz-rich zones. The analysis of the Rodalquilar WorldView-3 data was based on the Adaptive Coherence Estimator (ACE), a partial unmixing algorithm. The ACE processing accurately mapped the spatial distribution of alunite, kaolinite, illite and goethite. Alunite is abundant in the vuggy silica and advanced argillic alteration zones, and in the second stage supergene acid sulfate alteration. Kaolinite is predominant in the intermediate argillic alteration zone. Illite is abundant in the outer parts of the intermediate argillic alteration zone. Goethite image maps gossans that mainly occur in the vuggy silica and advanced argillic alteration zones, and in the areas characterized by the second stage supergene acid sulfate alteration. The detection of quartz-rich zones from the ASTER TIR data complemented the WorldView-3 mapping results. The study shows the efficiency of high spatial resolution multispectral remote sensing imagery recorded by the WorldView-3 satellite for district-level mineral exploration studies.     

Extraction of hydrothermal alterations from ASTER SWIR data from east Zanjan,northern Iran

The use of satellite images for mineral exploration has been very successful in pointing out the presence of minerals such as smectite and kaolinite which are important in the identification of hydrothermal alterations. Shortwave infrared (SWIR) bands from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) with the wavelength of ASTER SWIR bands between 1.65 and 2.43 μm has a good potential for mapping a hydrothermal alteration minerals such as alunite, pyrophyllite, kaolinite, illite–muscovite–sericite, and carbonate. In this range, hydroxide minerals which have been produced by hydrothermal alteration exhibit good absorption compared to shorter or longer wavelengths. In this research which aims to remove atmospheric and topographic effects from ASTER SWIR data, the authors used the log-residual method (LRM) with the minimum noise fraction (MNF) transformation to create a pixel purity index (PPI) which was used to extract the most spectrally pure pixels from multispectral images. Spectral analyses of the clay mineralogy of the study area (east Zanjan, in northern Iran) were obtained by matching the unknown spectra of the purest pixels to the U.S. Geological Survey (USGS) mineral library. Three methods, spectral feature fitting (SFF), spectral angle mapping (SAM), and binary encoding (BE) were used to generate a score between 0 and 1, where a value of 1 indicates a perfect match showing the exact mineral type. In this way, it was possible to identify certain mineral classes, including chlorite, carbonate, calcite–dolomite–magnesite, kaolinite–smectite, alunite, and illite. In this research, two main propylitic and phyllic–argillic zones could be separated using their compositions of these minerals. These two alteration zones are important for porphyry copper deposits and gold mineralization in this part of Iran.     

ASTER spectral sensitivity of carbonate rocks – Study in Sultanate of Oman

Remote sensing satellite data plays a vital role and capable in detecting minerals and discriminating rock types for explorations of mineral resources and geological studies. Study of spectral absorption characters of remotely sensed data are under consideration by the exploration and mining companies, and demonstrating the spectral absorption characters of carbonates on the cost-effective multispectral image (rather than the hyperspectral, Lidar image) for easy understanding of all geologists and exploration communities of carbonates is very much important. The present work is an integrated study and an outcome of recently published works on the economic important carbonate rocks, includes limestone, marl, listwaenites and carbonatites occurred in parts of the Sultanate of Oman. It demonstrates the spectral sensitivity of such rocks for simple interpretation over satellite data and describes and distinguishes them based on the absorptions of carbonate minerals in the spectral bands of advanced spaceborne thermal emission and reflection radiometer (ASTER) for mapping and exploration studies. The study results that the ASTER spectral band 8 discriminates the carbonate rocks due to the presence of predominantly occurred carbonate minerals; the ASTER band 5 distinguishes the limestones and marls (more hydroxyl clay minerals) from listwaenite (hydrothermally altered rock) due to the presence of altered minerals and the ASTER band 4 detects carbonatites (ultramafic intrusive alkaline rocks) which contain relatively more silicates. The study on the intensity of the total absorptions against the reflections of these rocks shows that the limestones and marls have low intensity in absorptions (and high reflection values) due to the presence of carbonate minerals (calcite and dolomite) occurred in different proportions. The listwaenites and carbonatites have high intensity of absorptions (low reflection values) due to the occurrence of Mn-oxide in listwaenites and carbonates in carbonatites apart the influence of major carbonate minerals that occurred predominantly in these rocks. The study of ASTER thermal infrared (TIR) spectral bands distinguished the marls have low emissivity of energy due to the presence of hydroxyl bearing alumina-silicate minerals from the other rocks such as limestones, listwaenites and carbonatites which have high emissivity due to the absence of hydroxyl bearing alumina-silicate minerals and the presence of carbonate minerals and carbonates.     

Mapping hydrothermal alteration zones and lineaments associated with orogenic gold mineralization using ASTER data: A case study from the Sanandaj-Sirjan Zone,Iran

The Sanandaj-Sirjan Zone (SSZ) is considered as an important region for gold exploration in the western sector of Iran. Its mountainous topography and unpaved routes make its study challenging for researchers and raise the costs for mining companies strating new exploration plans. Gold mineralization mainly occurs as irregular to lenticular sulfide-bearing quartz veins along shear zones in deformed mafic to intermediate metavolcanic and metasedimentary rocks. In this investigation, ASTER data are used for mapping hydrothermal alteration minerals and to better discriminate geological structural features associated with orogenic gold occurrences in the area. Image transformation techniques such as specialized band ratioing and Principal Component Analysis are used to delineate lithological units and alteration minerals. Supervised classification techniques, namely Spectral Angle Mapper (SAM) and Spectral Information Divergence (SID) are applied to detect subtle differences between indicator alteration minerals associated with ground-truth gold locations in the area. The directional filtering technique is applied to help in tracing along the strike the different linear structures. Results demonstrate that the integration of image transformation techniques and supervised classification of ASTER data with fieldwork and geochemical exploration studies has a great efficiency in targeting new prospects of gold mineralization in the SSZ. The approach used in this research provides a fast, cost-efficient means to start a comprehensive geological and geochemical exploration programs in the study area and elsewhere in similar regions.     

Spectral transformation of ASTER and Landsat TM bands for lithological mapping of Soghan ophiolite complex,south Iran

Spectral transformation methods, including correlation coefficient (CC) and Optimum Index Factor (OIF), band ratio (BR) and principal component analysis (PCA) were applied to ASTER and Landsat TM bands for lithological mapping of Soghan ophiolitic complex in south of Iran. The results indicated that the methods used evidently showed superior outputs for detecting lithological units in ophiolitic complexes. CC and OIF methods were used to establish enhanced Red–Green–Blue (RGB) color combination bands for discriminating lithological units. A specialized band ratio (4/1, 4/5, 4/7 in RGB) was developed using ASTER bands to differentiate lithological units in ophiolitic complexes. The band ratio effectively detected serpentinite dunite as host rock of chromite ore deposits from surrounding lithological units in the study area. Principal component images derived from first three bands of ASTER and Landsat TM produced well results for lithological mapping applications. ASTER bands contain improved spectral characteristics and higher spatial resolution for detecting serpentinite dunite in ophiolitic complexes. The developed approach used in this study offers great potential for lithological mapping using ASTER and Landsat TM bands, which contributes in economic geology for prospecting chromite ore deposits associated with ophiolitic complexes.     

Comparison of Landsat OLI,ASTER, and Sentinel 2A data in lithological mapping : A Case study of Rich area (Central High Atlas,Morocco)

The eastern part of the Rich area consists of the massive Paleozoic and Meso-Cenozoic cover formations that present the geodynamic development of the study area, where is characterized by various carbonate facies of Jurassic age. The geographical characteristic of the study area leaves the zone difficult to map by conventional methods. The objective of this work focuses on the mapping of the constituent lithological units of the study area using multispectral data of Landsat OLI, ASTER, and Sentinel 2A MSI. The processing of these data is based on a precise methodology that distinguishs and highlights the limits of the different lithological units that have an approximate similarity of spectral signature. Three techniques were used to enhance the image including Principal Component Analysis (PCA), Minimum Noise Fraction (MNF), and Independent Component Analysis (ICA). Lithological mapping was performed using two types of supervised classification : Maximum likelihood classifier (MLC) and Support Vector Machine (SVM).The results of processing data show the effectiveness of Sentinel 2A data in mapping of lithological units than the ASTER and Landsat OLI data. The classification evaluation of two methods of the Sentinel 2A MSI image showed that the SVM method give a better classification with an overall accuracy of 93,93% and a Kappa coefficient of 0.93, while the MLC method present an overall accuracy of 82,86% and a Kappa coefficient of 0.80. The results of mapping obtained show a good correlation with the geological map of the study area as well as the efficiency of remote sensing in identification of different lithological units in the Central High Atlas.     

Detection of hydrothermal alteration zones using ASTER data in Nimu porphyry copper deposit,south Tibet,China

Advanced space-borne thermal emission and reflection radiometer (ASTER) data were evaluated for the hydrothermal alteration mapping of the Nimu porphyry copper deposit, southern Tibet. According to the metallogenic model for porphyry copper, we chose hydrothermal alteration mineral association and then established a remote sensing model. Relative absorption-band depth (RBD) and simple band combination methods in visible near infrared (VNIR) and shortwave infrared (SWIR) bands were used to retrieve information about lithological distributions. Principal component analyses (PCA) were applied to extract the prospecting information based on the spectral information of argillization mineral association, propylitization mineral association, and iron stained (limonite) effects. Results of the study match up well with known copper occurrences and a circular structure in study area, while circular structures usually have close relationship with mineralization. Combined with field validation, ASTER data are proved able to characterise the alteration zone of these porphyry deposits. With VNIR and SWIR bands, argillic, propylitic and ferritization alterations in a single deposit can be effectively discriminated.     

Identifying areas of high economic-potential copper mineralization using ASTER data in the Urumieh–Dokhtar Volcanic Belt,Iran

This study investigates the application of spectral image processing methods to ASTER data for mapping hydrothermal alteration zones associated with porphyry copper mineralization and related host rock. The study area is located in the southeastern segment of the Urumieh–Dokhtar Volcanic Belt of Iran. This area has been selected because it is a potential zone for exploration of new porphyry copper deposits. Spectral transform approaches, namely principal component analysis, band ratio and minimum noise fraction were used for mapping hydrothermally altered rocks and lithological units at regional scale. Spectral mapping methods, including spectral angle mapper, linear spectral unmixing, matched filtering and mixture tuned matched filtering were applied to differentiate hydrothermal alteration zones associated with porphyry copper mineralization such as phyllic, argillic and propylitic mineral assemblages.     

A reflectance spectra-based approach to mapping salt fields using PCA-fused Landsat TM data

In this paper a method based on in situ measured reflectance spectra was developed for accurately mapping salt fields in the Taibei Salt Farm in Lianyungang City of East China. After radiometric correction and geometric rectification, six multispectral ETM+ bands were fused with the panchromatic band via principal components analysis (PCA). The fused data were used to map salt fields in the farm. Salt fields were mapped 91.95% correctly in comparison with ground statistics from raw multispectral bands. This accuracy level rose to 96.4% with the use of the panchromatic band (15 m resolution). However, PCA-fused data produced the highest accuracy of 98.8%. At the zone level, coarse resolution data resulted in an accuracy of 98.93% for crystallization ponds, but only 82.68% for condensation ponds. Use of the panchromatic band alone improved the accuracy for condensation ponds but decreased the accuracy for crystallization and evaporation ponds. Results derived from PCA-fused data are highly consistent with the ground statistics at a discrepancy between 0.35% for evaporation zone and 1.80% for condensation zone. It is concluded that a fine spectral resolution is important to separation of ponds of a varying salt content while a fine spatial resolution is important to their mapped area. Ponds of a lower salt content can be mapped more accurately from fused data than from raw spectral bands.     

Novel method for reconstruction of hyperspectral resolution images from multispectral data for complex coastal and inland waters

Hyperspectral resolution image products of a synthetic sensor featuring the high spatial resolution of the space-borne sensor can offer cost-effective means for enhancing our current capabilities in terms of providing an array of images in lieu of designing an expensive system for image acquisition, which can serve the expanding needs of the scientific and user communities for various critical water color applications. Despite several studies on enhancing the capability of land remote sensing sensors, full spectrum reconstruction of water color images with varying spectral bands is hampered by the lack of methods and accurate atmospheric correction procedures. In the present work, a novel method is developed for reconstruction of hyperspectral resolution images from high spatial-resolution Sentinel 2 Multispectral Instrument (MSI) data representative of many complex waters in coastal and inland zones. This method uses a deep neural network (DNN) with multiple blocks of deconvolution and dense layers. The spectral reconstruction of hyperspectral resolution images from multispectral data was based on rigorous training data from the atmospherically-corrected and validated HICO normalized water-leaving radiance products (with spectral resolution 438-868 nm sampled at 5.7 nm) of diverse water types. The generalizability and versatility of the DNN method was tested and evaluated systematically by means of various qualitative and quantitative analyses using concurrent space-borne (MSI and HICO) and in-situ measurements from different regional waters. Reconstructed hyperspectral resolution radiances obtained from the MSI images closely matched with independent HICO and MSI measurements within the desired accuracy. Successful reconstruction and validation of the hyperspectral radiances indicate that the proposed state-of-the-art method provides possible future directions for enhancing our current capabilities of space-borne sensors for various research purposes and societal applications at local, regional and global scales.     

Detection of volcanic,CO2, and ENSO signals in surface air temperature

The Russian surface air temperature data set (Northern Hemisphere, gridded, monthly average, 1891–1981) is analyzed to separate signals from large volcanic eruptions, ENSO (El Niño/Southern Oscillation) events, and signals in conjunction with hemispheric temperature changes. Characteristic patterns of zonal average temperature as a function of month and latitude as well as monthly average maps are produced for each forcing. The largest response to volcanic forcing appears at a lag of 2 and 3 years following volcanic eruptions. The zonal average response shows cooling at all latitudes and months, except in the Arctic in summer. The largest cooling is in the high latitudes in the winter. This agrees very well with energy balance model calculations of the response pattern to large volcanic eruptions, and can be explained by sea ice/thermal inertia and, to a lesser extent, snow/albedo feedbacks. The spatial pattern shows large areas of cooling at all longitudes. In response to ENSO oscillations the largest response is synchronous or with the temperature lagging ENSO oscillations by 6 months. The zonal average response is virtually zero, but the spatial patterns show large variations of opposite sign at different longitudes. Patterns produced by weighting temperature anomalies with hemispheric mean temperature indicate patterns to be expected following a CO₂ warming.     

利用CRISM数据探测火星表面含水矿物及其演化

火星表层矿物识别是了解火星大气环境变化、表层地质环境的关键因素。通过确定火星表层矿物,分析矿物特性,了解火星的环境状态、地质演化以及火星的未来适居性。火星勘测轨道器(Mars reconnaissance orbiter,MRO)上搭载的紧凑型侦察成像仪(compact reconnaissance imaging spectrometer for Mars,CRISM)是针对火星矿物探测的最新的高光谱成像仪,以很高的光谱分辨率覆盖可见光至近红外波段,为火星表面的矿物分布及区域填图提供了可能。通过光谱匹配及计算CRISM光谱参数综合产品,分析了火星Jezero以及Holden撞击坑内的矿物成分及其演化。Jezero与Holden因其复杂而关键的地质特征,被列为火星2020登陆任务的备选登陆点。对这两个地点的矿物探测与填图分析不仅可进一步分析火星典型地质特征以及演化,而且还可以为未来的火星登陆点分析提供现实意义。在研究区域已检测到与水成蚀变相关的含水硅酸盐类以及碳酸盐类与含水硫酸盐类。水合矿物增加了这些区域曾经含水的可能性,且矿物的多样性表明研究区地质环境经历了不同的变化,其中Jezero地区不同于火星的绝大多数地区从中性环境到酸性环境的演化,有可能经历了从中性环境到碱性环境的演化。     

Modeling urban heat islands in heterogeneous land surface and its correlation with impervious surface area by using night-time ASTER satellite data in highly urbanizing city,Delhi-India

The present study is an assessment and identification of urban heat island (UHI) in the environment of one of the fastest urbanizing city of India, Delhi Metropolis, employing satellite image of ASTER and Landsat 7 ETM+ in the thermal infrared region 3–14 μm. Temporal (2001 and 2005) ASTER datasets were used to analyze the spatial structure of the thermal urban environment subsequently urban heat island (UHI) in relation to the urban surface characteristics and land use/land cover (LULC). The study involves derivation of parameters governing the surface heat fluxes, constructing statistics of ASTER thermal infrared images along with validation through intensive in situ measurements. The average images reveal spatial and temporal variations of land surface temperature (LST) of night-time and distinct microclimatic patterns. Central Business District (CBD) of Delhi, (Connaught Place, a high density built up area), and commercial/industrial areas display heat islands condition with a temperature greater than 4 °C compared to the suburbs. The small increase in surface temperature at city level is mainly attributed to cumulative impact of human activities, changes in LULC pattern and vegetation density. In this study the methodology takes into account spatially-relative surface temperatures and impervious surface fraction value to measure surface UHI intensity between the urban land cover and rural surroundings. Both the spatial and temporal variation in surface temperature associated with impervious surface area (ISA) has been evaluated to assess the effect of urbanization on the local climate.     

Remote sensing detection of gold related alteration zones in Um Rus area, Central Eastern Desert of Egypt

Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and Phased Array L-band Synthetic Aperture Radar (PALSAR) images covering the Um Rus area in the Central Eastern Desert of Egypt were evaluated for mapping geologic structure, lithology, and gold-related alteration zones. The study area is covered by Pan-African basement rocks including gabbro and granodiorite intruded into a variable mixture of metavolcanics and metasediments. The first three principal component analyses (PCA1, PCA2, PCA3) in a Red-Green-Blue (RGB) of the visible through shortwave-infrared (VNIR + SWIR) ASTER bands enabled the discrimination between lithological units. The results show that ASTER band ratios ((2 + 4)/3, (5 + 7)/6, (7 + 9)/8) in RGB identifies the lithological units and discriminates the granodiorite very well from the adjacent rock units.The granodiorites are dissected by gold-bearing quartz veins surrounded by alteration zones. The microscopic examination of samples collected from the alteration zones shows sericitic and argillic alteration zones. The Spectral Angle Mapper (SAM) and Spectral Information Divergence (SID) supervised classification methods were applied using the reference spectra of the USGS spectral library. The results show that these classification methods are capable of mapping the alteration zones as indicated by field verification work. The PALSAR image was enhanced for fracture mapping using the second moment co-occurrence filter. Overlying extracted faults and alteration zone classification images show that the N30E and N-S fractures represent potential zones for gold exploration. It is concluded that the proposed methods can be used as a powerful tool for ore deposit exploration.     

Built-up land mapping capabilities of the ASTER and Landsat ETM+ sensors in coastal areas of southeastern China

Worldwide urbanization has accelerated expansion of urban built-up lands and resulted in substantial negative impacts on the global environments. Precisely measuring the urban sprawl is becoming an increasing need. Among the satellite-based earth observation systems, the Landsat and ASTER data are most suitable for mesoscale measurements of urban changes. Nevertheless, to date the difference in the capability of mapping built-up land between the two sensors is not clear. Therefore, this study compared the performances of the Landsat-7 ETM+ and ASTER sensors for built-up land mapping in the coastal areas of southeastern China. The comparison was implemented on three date-coincident image pairs and achieved by using three approaches, including per-band-based, index-based, and classification-based comparisons. The index used is the Index-based Built-up Index (IBI), while the classification algorithm employed is the Support Vector Machine (SVM). Results show that in the study areas, ETM+ and ASTER have an overall similar performance in built-up land mapping but also differ in several aspects. The IBI values determined from ASTER were consistently higher than from ETM+ by up to 45.54% according to percentage difference. The ASTER also estimates more built-up land area than ETM+ by 5.9–6.3% estimated with the IBI-based approach or 3.9–6.1% with the SVM classification. The differences in the spectral response functions and spatial resolution between relative spectral bands of the two sensors are attributed to these different performances.     

Satellite observations of sea ice

An overview is presented of Antarctic and Arctic sea ice studies using data from the Nimbus-5 ESMR and the Nimbus-7 SMMR passive microwave radiometers. Four years (1973–1976) of ESMR data for the Antarctic Ocean define the characteristics of the seasonal cycle including regional contrasts and interannual variations. Major advances include the discovery of the Weddell polynya and the presence of substantial areas of open water in the Antarctic winter pack ice. Regional differences in sea ice extent on time-scales of about a month are shown to be associated with variations in surface-wind fields. In the Arctic, the computation of sea ice concentration is complicated by the presence of multiyear ice, but the amount of multiyear ice becomes an important measurable quantity with dual-polarized, multifrequency passive microwave sensors. Analysis of SMMR data demonstrates its advantage for studying the spatial and temporal variability of the Arctic ice cover. Large observed interannual variations in the distribution of the multiyear pack ice and the presence of significant divergent areas in the central Arctic during winter contrast markedly with the classical view of the Arctic pack ice.     

Exploring links between crater floor mineralogy and layered lunar crust

Floors of similar sized craters, representing material from similar depth horizons, have been studied to explore their suitability as mineralogy indicators at various depths within the lunar crust. Clementine UV–vis multispectral data was used to generate mineral abundance maps of crater floors and surroundings using a modified version of algorithm given by Pieters et al. (2001) [Pieters, C.M., Head, J.W., Gaddis, L., Jolliff, B. and Duke, M. Rock types of the south pole aitken basin and extent of basaltic volcanism, JGR (106) E11, 28001–28022, 2001.]. Substantial processing of the crater floor material due to variety of geological processes is evident in the generated maps, making straight forward interpretations difficult. However, systematic compositional trends in fresh craters on the floors of target craters seem to indicate the feasibility of such an effort.     

Landsat image data quality studies

The July 1982 launch of Landsat-4 was immediately followed by a two-year comprehensive set of detailed investigations sponsored by the National Aeronautics and Space Administration (NASA) at Goddard Space Flight Center (GSFC). The Landsat Image Data Quality Analysis (LIDQA) research plans for these investigations were specified prior to launch, so that minimum time would be lost in assessing the performance of the long-awaited Thematic Mapper (TM) sensor that Landsat-4 carried in addition to a fourth Multispectral Scanner (MSS). The LIDQA investigations have been substantially completed, and have shown that the TM is a very good spaceborne multispectral radiometer, and has met or exceeded most of its design goals. TM's new short-wave infrared (SWIR) spectral capability yielded improved mineral and plant discrimination compared to the MSS, as anticipated by ground-based and airborne TM simulations. Moreover, the improved spatial resolution and geometric accuracy of Landsat-4 and the TM have resulted in satellite image maps exceeding 1:100,000 U.S. map accuracy standards. Finally, based on an information entropy measure, principal component analysis, and classification results, TM data has been shown to approach its theoretical limit in information content per pixel, exceeding the MSS by at least a factor of two.     

Integrating aeromagnetic data and Landsat-8 imagery for detection of post-accretionary shear zones controlling hydrothermal alterations: The Allaqi-Heiani Suture zone,South Eastern Desert,Egypt

The Arabian-Nubian Shield (ANS) underwent a regional carbonation event with CO₂ fluxes derived from the mantle and circulated along post-accretionary shear zones, thus affecting the redistribution of gold mineralization. Formerly, the analyses of remotely-sensed data have suggested regions of gold mineralization linked to the post-accretionary structured framework, but the results were insufficient for detailed prospecting in the ANS. In this research, aeromagnetic data and Landsat-8 imagery were integrated for delineating new high potential zones of gold mineralization in the Allaqi-Heiani Suture (AHS) zone, the ANS, South Eastern Desert (SED) of Egypt. Aeromagnetic data were enhanced using the Center for exploration targeting (CET) grid enhancement technique to detect the main structures that control hydrothermal alterations in the study area. Principal Component Analysis (PCA) technique and ratios of spectral bands were applied to Landsat-8 data for mapping zones of hydrothermal alteration associated with gold mineralization. The traced structural elements from RTP, CET and Landsat-8 maps were statistically plotted and interpreted using rose diagrams. These diagrams indicated that the NW and NE trends are the most dominant in the RTP map and that the intersection zones obtained from the CET analysis are aligned along the NW-oriented trend. While the NNW, WNW and NE trends were the most dominant ones in Landsat maps. The integration of the results indicates several new high potential zones of gold and Cu/Ni mineralization types, which are mostly concentrated at the western part of the AHS zone. The hydrothermal alteration zones and associated gold mineralization are strongly linked to NW, NE, E-W and WNW trending lineaments. The approach used in this study can be applied to other parts of the ANS and other regions with similar geological conditions around the world.     

Utility of landsat data in mineral exploration — a case study from Orissa,India

The utility of Landsat data in geosciences has been established beyond doubt. In this paper utility of Landsat data in mineral exploration has been highlighted.The geologic and geomorphic interpretation of Landsat data brought out two very significant and characteristic features in scene 152-046 in the southern part of Orissa. One was distinct tonal anomaly and other was occurance of flat planated surface devoid of vegetation and drainage on top of hills. This when checked on ground at Gandhmardan was found to be bauxite bearing lateritic plateau. When this known information was extrapolated over other regions in scenes 151-046 and 152-046, all other bauxitic — lateritic plateaus were picked up very easily on Landsat imagery.The information was further extrapolated in the southern scene No.152-047 where without doing much detailed geologic and geomorphic interpretation almost all other bauxitic — lateritic bodies occuring in the region were picked up. This proves the utility of Landsat data in mineral exploration.Moreover delineation of extent of such bodies could be done very accurately on Landsat imagery thus saving considerable time in the exploration programme.