EUV Observations Above Polar Coronal Holes

We derive electron temperature and density as a function of height up to 0.2 R_⊙ above the limb in polar coronal holes, using five EUV data sets recorded by the SOHO Coronal Diagnostic Spectrometer between July 1997 and February 1998. Radial T and N distributions, averaged in a 2° to 10° range of position angles, are the same above the North and South coronal holes. They do not show any time variability over a period of seven months. Polar plumes are found to have lower electron temperature and higher density than the interplume lanes. The electron density slope suggests that the proton temperatures are twice as high as the electron temperatures. This revised version was published online in June 2006 with corrections to the Cover Date.     

Search for Signatures of a Coronal Hole in Transition Region Lines Near Disk Center

The analysis of data taken by SUMER near disk center, where a small coronal hole is observed in EIT images, is performed. From the measurements of Doppler non-thermal velocities and intensities, we search for the diagnostics and the signature of small scale structures in the coronal hole using transition region lines. Transition region lines in the range of 7 × 10⁴ K to 2.5 × 10⁵ K have a non-thermal velocity excess of 4.0 to 5.5 km s^-1 relative to the contiguous quiet Sun. While the average intensity is lower in the coronal hole than in the quiet area, this result shows an increase of turbulence at the base of the high speed solar wind. This revised version was published online in June 2006 with corrections to the Cover Date.     

Coronal Hole Properties Observed with Sumer

We analyze SUMER spectra of 14 lines belonging to 12 ions, obtained on both sides of the boundary of polar coronal holes as well as at other locations along the limb. We compare line intensities, shifts and widths in coronal holes with values obtained in the quiet Sun. We find that with increasing formation temperature, spectral lines show an increasingly stronger blueshift in coronal holes relative to the quiet Sun at an equal heliospheric angle. The width of the lines is generally larger (by a few km/s) inside the coronal hole. Intensity measurements show the presence of the coronal hole in Ne VIII lines as well as in Fe XII, with evidence for a slightly enhanced emission in polar coronal holes for lines formed below 10⁵ K. This revised version was published online in June 2006 with corrections to the Cover Date.     

Yohkoh results in the context of the high-latitude heliosphere

Designed primarily to study solar activity, Yohkoh includes an X-ray telescope that obtains full-sun coronal images which show a range of features. Coronal X-ray emission-exclusive of flares, is notable for its variability even in the largest structures. A mass ejection event is related to magnetic field reconnection. Such events exhibit both accelerated and decelerated behaviour. Coronal hole temperatures are estimated from the filter ratio method. A plasma component at around 2.10⁶ K is identified. X-ray emission is detected from the South polar coronal hole. A preliminary comparison of Spartan coronagraph images with Yohkoh data suggests that polar plumes or rays are not connected to bright points.     

Observations of the solar wind from coronal holes

The solar wind emanating from coronal holes (CH) constitutes a quasi-stationary flow whose properties change only slowly with the evolution of the hole itself. Some of the properties of the wind from coronal holes depend on whether the source is a large polar coronal hole or a small near-equatorial hole. The speed of polar CH flows is usually between 700 and 800 km/s, whereas the speed from the small equatorial CH flows is generally lower and can be <400 km/s. At 1 AU, the average particle and energy fluxes from polar CH are 2.5×10⁸ cm^–2 sec^–1 and 2.0 erg cm^–2 s^–1. This particle flux is significantly less than the 4×10⁸ cm^–2 sec^–1 observed in the slow, interstream wind, but the energy fluxes are approximately the same. Both the particle and energy fluxes from small equatorial holes are somewhat smaller than the fluxes from the large polar coronal holes.Many of the properties of the wind from coronal holes can be explained, at least qualitatively, as being the result of the effect of the large flux of outward-propagating Alfvén waves observed in CH flows. The different ion species have roughly equal thermal speeds which are also close to the Alfvén speed. The velocity of heavy ions exceeds the proton velocity by the Alfvén speed, as if the heavy ions were surfing on the waves carried by the proton fluid.The elemental composition of the CH wind is less fractionated, having a smaller enhancement of elements with low first-ionization potentials than the interstream wind, the wind from coronal mass ejections, or solar energetic particles. There is also evidence of fine-structure in the ratio of the gas and magnetic pressures which maps back to a scale size of roughly 1° at the Sun, similar to some of the fine structures in coronal holes such as plumes, macrospicules, and the supergranulation.     

The Composition of the Solar Wind in Polar Coronal Holes

The solar wind charge state and elemental compositions have been measured with the Solar Wind Ion Composition Spectrometers (SWICS) on Ulysses and ACE for a combined period of about 25 years. This most extensive data set includes all varieties of solar wind flows and extends over more than one solar cycle. With SWICS the abundances of all charge states of He, C, N, O, Ne, Mg, Si, S, Ar and Fe can be reliably determined (when averaged over sufficiently long time periods) under any solar wind flow conditions. Here we report on results of our detailed analysis of the elemental composition and ionization states of the most unbiased solar wind from the polar coronal holes during solar minimum in 1994–1996, which includes new values for the abundance S, Ca and Ar and a more accurate determination of the ²⁰Ne abundance. We find that in the solar minimum polar coronal hole solar wind the average freezing-in temperature is ∼1.1×10⁶ K, increasing slightly with the mass of the ion. Using an extrapolation method we derive photospheric abundances from solar wind composition measurements. We suggest that our solar-wind-derived values should be used for the photospheric ratios of Ne/Fe=1.26±0.28 and Ar/Fe=0.030±0.007.     

The Expansion of Coronal Plumes in the Fast Solar Wind

Coronal plumes are believed to be essentially magnetic features: they are rooted in magnetic flux concentrations at the photosphere and are observed to extend nearly radially above coronal holes out to at least 15 solar radii, probably tracing the open field lines. The formation of plumes itself seems to be due to the presence of reconnecting magnetic field lines and this is probably the cause of the observed extremely low values of the Ne/Mg abundance ratio. In the inner corona, where the magnetic force is dominant, steady MHD models of coronal plumes deal essentially with quasi-potential magnetic fields but further out, where the gas pressure starts to be important, total pressure balance across the boundary of these dense structures must be considered. In this paper, the expansion of plumes into the fast polar wind is studied by using a thin flux tube model with two interacting components, plume and interplume. Preliminary results are compared with both remote sensing and solar wind in situ observations and the possible connection between coronal plumes with pressure-balance structures (PBS) and microstreams is discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

Constraints on the FIP Mechanisms from Solar Wind Abundance Data

In the slow solar wind, elements with (first) ionisation potential (FIP) between ∼10 eV and 22 eV are depleted by a factor of about 4 relative to their abundances in the Outer Convective Zone (OCZ), and helium (FIP = 24.5 eV) is further depleted by a factor of ∼1.8. This depletion, called the FIP effect, is much less pronounced in the high speed streams coming out of coronal holes. The systematics of element depletion suggests that the FIP effect is produced at a temperature ∼104 K and that it is controlled by the time of ionisation at the solar surface. At the boundary of the polar coronal holes, the transition from a strong to a weak FIP effect is relatively sharp and coincides with the change in coronal electron temperature, indicating a profound change in coronal as well as chromospheric properties at this boundary. This revised version was published online in June 2006 with corrections to the Cover Date.     

Coronal Holes and Open Magnetic Flux

Coronal holes are low-density regions of the corona which appear dark in X-rays and which contain “open” magnetic flux, along which plasma escapes into the heliosphere. Like the rest of the Sun’s large-scale field, the open flux originates in active regions but is subsequently redistributed over the solar surface by transport processes, eventually forming the polar coronal holes. The total open flux and radial interplanetary field component vary roughly as the Sun’s total dipole strength, which tends to peak a few years after sunspot maximum. An inverse correlation exists between the rate of flux-tube expansion in coronal holes and the solar wind speed at 1 AU. In the rapidly diverging fields present at the polar hole boundaries and near active regions, the bulk of the heating occurs at low heights, leading to an increase in the mass flux density at the Sun and a decrease in the asymptotic wind speed. The quasi-rigid rotation of coronal holes is maintained by continual footpoint exchanges between open and closed field lines, with the reconnection taking place at the streamer cusps. At much lower heights within the hole interiors, “interchange reconnection” between small bipoles and the overlying open flux also gives rise to coronal jets and polar plumes.     

SUMER Observations of Coronal-Hole Temperatures

Observations of emission lines in the vacuum-ultraviolet spectral range with calibrated instrumentation provide crucial information on the prevailing plasma temperatures in the solar atmosphere. Coronal-hole temperatures measured by the SUMER spectrometer on SOHO will be presented in this contribution. Electron temperatures can be estimated from the formation temperatures of the observed emission lines. Line-ratio and emission-measure analyses, however, offer higher accuracies. Typical electron temperatures at altitudes of H<200?Mm in coronal holes are below 1?MK in bright structures—the coronal plumes—with higher values in darker areas—the inter-plume regions. Line-width measurements yield effective ion temperatures, which are much higher than the electron temperatures. Observations of line profiles emitted from species with different masses allow a separation of the effective temperatures into ion temperatures and unresolved non-thermal motions along the line of sight.     

Ulysses' Second Orbit: Remarkably Different Solar Wind

By the time of the 34th ESLAB symposium, dedicated to the memory of John Simpson, Ulysses had nearly reached its peak southerly latitude in its second polar orbit. The global solar wind structure observed thus far in Ulysses' second orbit is remarkably different from that observed over its first orbit. In particular, Ulysses observed highly irregular solar wind with less periodic stream interaction regions, much more frequent coronal mass ejections, and only a single, short interval of fast solar wind. Ulysses also observed the slowest solar wind seen thus far in its ten-year journey (∼270 km s⁻¹). The complicated solar wind structure undoubtedly arises from the more complex coronal structure found around solar activity maximum, when the large polar coronal holes have disappeared and coronal streamers, small-scale coronal holes, and frequent CMEs are found at all heliolatitudes. This revised version was published online in August 2006 with corrections to the Cover Date.     

带斜孔肋大宽高比矩形通道的强化传热特性

为了获得带斜孔肋大宽高比矩形通道的强化传热特性,并寻求最佳的孔排倾斜角度,调节孔排倾斜角度和通道雷诺数,使其分别在0°~30°和3×104~9×104范围内变化,通过数值计算系统分析了通道摩擦因数和带肋壁努塞尔数等参数的变化规律.研究发现:相比于常规肋片,新型斜孔肋有效改善了肋片后方紧邻肋片的局部区域的壁面换热,并降低通道的摩擦因数,但传热增强因子有所减小;随着孔排倾斜角度的增大,通道的相对摩擦因子单调升高,传热增强因子则呈现出先升高后降低的变化过程,因此存在着最优孔排倾斜角度为15°,此时斜孔肋的强化传热综合指标达到最大值;随着通道雷诺数的增大,斜孔肋通道的摩擦因数小幅减小,换热则逐渐增强.      

Two-fluid 2.5D MHD Simulations of the Fast Solar Wind in Coronal Holes and the Relation to UVCS Observations

Recent SOHO/UVCS observations indicate that the perpendicular proton and ion temperatures are much larger than electron temperatures. In the present study we simulate numerically the solar wind flow in a coronal hole with the two-fluid approach. We investigate the effects of electron and proton temperatures on the solar wind acceleration by nonlinear waves. In the model the nonlinear waves are generated by Alfvén waves with frequencies in the 10^-3 Hz range, driven at the base of the coronal hole. The resulting electron and proton flow profile exhibits density and velocity fluctuations. The fluctuations may steepen into shocks as they propagate away from the sun. We calculate the effective proton temperature by combining the thermal and wave velocity of the protons, and find qualitative agreement with the proton kinetic temperature increase with height deduced from the UVCS Ly-α observations by Kohl et al. (1998). This revised version was published online in June 2006 with corrections to the Cover Date.     

Semiempirical Models of the Slow and Fast Solar Wind

Coronal holes can produce several types of solar wind with a variety of compositional properties, depending on the location and strength of the heating along their open magnetic field lines. High-speed wind is associated with (relatively) slowly diverging flux tubes rooted in the interiors of large holes with weak, uniform footpoint fields; heating is spread over a large radial distance, so that most of the energy is conducted outward and goes into accelerating the wind rather than increasing the mass flux. In the rapidly diverging open fields present at coronal hole boundaries and around active regions, the heating is concentrated at low heights and the temperature maximum is located near the coronal base, resulting in high oxygen freezing-in temperatures and low asymptotic wind speeds. Polar plumes have a strong additional source of heating at their bases, which generates a large downward conductive flux, raising the densities and enhancing the radiative losses. The relative constancy of the solar wind mass flux at Earth reflects the tendency for the heating rate in coronal holes to increase monotonically with the footpoint field strength, with very high mass fluxes at the Sun offsetting the enormous flux-tube expansion in active region holes. Although coronal holes are its main source, slow wind is also released continually from helmet streamer loops by reconnection processes, giving rise to plasma blobs (small flux ropes) and the heliospheric plasma sheet.     

Soho Observations of Density Fluctuations in Coronal Holes

In recent UVCS/SOHO White Light Channel (WLC) observations we found quasi-periodic variations in the polarized brightness (pB) in the polar coronal holes at heliocentric distances of 1.9 to 2.45 solar radii. The motivation for the observation is the 2.5D MHD model of solar wind acceleration by nonlinear waves, that predicts compressive fluctuations in coronal holes. In February 1998 we performed new observations using the UVCS/WLC in the coronal hole and obtained additional data. The new data corroborate our earlier findings with higher statistical significance. The new longer observations show that the power spectrum peaks in the 10–12 minute range. These timescales agree with EIT observations of brightness fluctuations in polar plumes. We performed preliminary LASCO/C2 observations in an effort to further establish the coronal origin of the fluctuations. This revised version was published online in June 2006 with corrections to the Cover Date.     

Experiments of flow and heat transfer performances for air-cooling laminated turbine vane

Flow resistance and heat transfer coefficients of typical double wall laminated film cooling configuration within a turbine vane were experimentally studied.The specimen was in large scale,and made of transparent organic glass.Laminated configuration consisted of double wall laminates,pin-fins,staggered arrays of impingement and film holes.The number ratio of impingement holes,pin-fins and film holes was2∶1∶1.Five experiment vanes were installed in static cascade,and experiments were carried out under constant heat flux.Re of internal cooling air in the experiment was from 104 to 2×105,and Re of external fluid was from 105 to 3×105.The experiment results show that flow resistances of front channel and back channel of the vane are in the same level,and both of them decrease as Re of cooling air increases.Nuof front channel is slightly higher than that of back channel.Both of them increase as Re of cooling air increases.And experiment results were obtained from experiment vanes were compared with that obtained from laminated flat plates,and the tendency of the results agrees well.     

Small scale structures in the solar corona

The observational characteristics of the small scale magnetic structures are summarized. The temperature structure and temporal variability of the emission from coronal bright points, that pervade the source region of the solar wind in coronal holes and the quiet sun, and from active regions are shown to be remarkably similar. Particular emphasis is given to observations, potentially feasible with SOHO, that could resolve some of the outstanding issues regarding the role of the small scale magnetic structures in the energy balance and properties of the solar wind.     

Large-scale Bright Fronts in the Solar Corona: A?Review of?��EIT waves��

??EIT waves?? are large-scale coronal bright fronts (CBFs) that were first observed in 195 Å images obtained using the Extreme-ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory (SOHO). Commonly called ??EIT waves??, CBFs typically appear as diffuse fronts that propagate pseudo-radially across the solar disk at velocities of 100?C700 km?s^?1 with front widths of 50?C100 Mm. As their speed is greater than the quiet coronal sound speed (c _s ??200 km?s^?1) and comparable to the local Alfvén speed (v _A ??1000 km?s^?1), they were initially interpreted as fast-mode magnetoacoustic waves ( $v_{f}=(c_{s}^{2} + v_{A}^{2})^{1/2}$ ). Their propagation is now known to be modified by regions where the magnetosonic sound speed varies, such as active regions and coronal holes, but there is also evidence for stationary CBFs at coronal hole boundaries. The latter has led to the suggestion that they may be a manifestation of a processes such as Joule heating or magnetic reconnection, rather than a wave-related phenomena. While the general morphological and kinematic properties of CBFs and their association with coronal mass ejections have now been well described, there are many questions regarding their excitation and propagation. In particular, the theoretical interpretation of these enigmatic events as magnetohydrodynamic waves or due to changes in magnetic topology remains the topic of much debate.