Geosynchronous satellites expanding a future GNSS satellite constellation: A precise orbit determination study

The integration of geosynchronous orbit (GSO) satellites in Global Navigation Satellite Systems (GNSS) is mostly discussed to enable a regional enhancement for tracking. But how do GSO satellites affect the orbit determination of the rest of the constellation? How accurately can these orbits be determined in a future GNSS tracking scenario with optical links? In this simulation study we analyze the benefit of GSO satellites as an expansion of a MEO (Medium Earth Orbit) satellite constellation – we selected the Galileo satellite constellation – for MEO Precise Orbit Determination (POD). We address not only the impact on POD of MEO satellites but also the possibility to precisely determine the GSO satellites – geostationary orbits (GEO) and inclined geosynchronous orbits (IGSO) – in such an expanded MEO constellation. In addition to GNSS microwave observations, we analyze the influence of different optical links between the participating entities: Optical two-way Inter-Satellite Links (OISL) and ground-space oriented Optical Two-Way Links (OTWL). These optical measurements together with the GNSS microwave observations give a remarkable benefit for the POD capability. In the case of GNSS and OTWL, we simulate the measurements with regard to a network of 16 ground stations. We pay great attention to the simulation of systematic effects of all measurement techniques. We discuss the influence on the systematic errors as well as the formal orbit uncertainties. A MEO constellation expanded with GSO satellites as well as the use of optical links together with GNSS observations not only improves the MEO satellite orbits but also the GSOs to a great extent.     

Estimation of GPS instrumental biases from small scale network

With 4 GPS receivers located in the equatorial anomaly region in southeast China, this paper proposes a grid-based algorithm to determine the GPS satellites and receivers biases, and at the same time to derive the total electron content (TEC) with time resolution of 15 min and spatial resolution of 1° by 3.5° in latitude and longitude. By assuming that the TEC is identical at any point within a given grid block and the biases do not vary within a day, the algorithm arranges unknown biases and TECs with slant path TEC from the 4 receivers’ observations into a set of equations. Then the instrumental biases and the TECs are determined by using the least squares fitting technique. The performance of the method is examined by applying it to the GPS receiver chain observations selected from 16 geomagnetically quiet days in four seasons of 2006. It is found that the fitting agrees with the data very well, with goodness of fit ranging from 0.452 TECU to 1.914 TECU. Having a mean of 0.9 ns, the standard deviations for most of the GPS satellite biases are less than 1.0 ns for the 16 days. The GPS receiver biases are more stable than that of the GPS satellites. The standard deviation in the 4 receiver bias is from 0.370 ns to 0.855 ns, with a mean of 0.5 ns. Moreover, the instrumental biases are highly correlated with those derived from CODE and JPL with independent methods. The typical precision of the derived TEC is 5 TECU by a conservative estimation. These results indicate that the proposed algorithm is valid and qualified for small scale GPS network.     

Analysis on navigation accuracy of high orbit spacecraft based on BDS GEO and IGSO satellites

To make up for the insufficiency of earth-based TT&C systems, the use of GNSS technology for high-orbit spacecraft navigation and orbit determination has become a new technology. It is of great value to applying Geosynchronous Earth Orbit (GEO) and Inclined GeoStationary Orbit (IGSO) navigation satellites for supporting the navigation of high-orbit spacecraft since there are three different types of navigation satellites in BeiDou Navigation Satellite System (BDS): Medium Earth Orbit (MEO), GEO and IGSO. This paper conducts simulation experiments based on Two-Line Orbital Element (TLE) data to analyze and demonstrate the role of these satellites in the navigation of high-orbit spacecraft. Firstly, the spacecraft in GEO was used as the target satellite to conduct navigation experiments. Experiments show that for the spacecraft on the GEO orbit, after adding GEO and IGSO respectively on the basis of receiving MEO navigation satellite signals, the accuracies were improved by 7.22 % and 6.06 % respectively. When adding both GEO and IGSO navigation satellites at the same time, the accuracy can reach 16 m. In the second place, navigation and positioning experiments were carried out on three high elliptical orbit (HEO) satellites with different semimajor axis (32037.2 km, 42385.9 km, 67509.6 km). The experiments show that the number of visible satellites has been improved significantly after adding GEO and IGSO navigation satellites at the same time. The visible satellites in these three orbits were improved by 32.84 %, 41.12 % and 37.68 %, respectively compared with only observing MEO satellites.The RMS values of the navigation positioning errors of these three orbits are 25.59 m, 87.58 m and 712.48 m, respectively.     

赤道异常区GPS-TEC与系统硬件偏差的反演

提出了一种基于最小二乘的赤道异常区GPS-TEC与系统硬件偏差的反演方法.利用设置在福州、厦门、广州和南宁4个台站的观测数据,可以得到GPS卫星和接收机的硬件偏差以及(20°～28°N,105°～123°E)区域中48个3°×1°网格的TEC(时间分辨率为15 min).应用于2006年观测数据,得到了较稳定的系统硬件偏差,其中卫星硬件偏差值与欧洲定轨中心公布的结果接近,得到的TEC具有合理的日变化和季节变化特征.该反演方法可以应用于赤道异常区电离层的研究.      

Near real-time BDS GEO satellite orbit determination and maneuver analysis with reversed point positioning

The Geostationary Earth Orbit (GEO) satellite is a crucial part of the BeiDou Navigation Satellite System (BDS) constellation. However, due to various perturbation forces acting on the GEO satellite, it drifts gradually over time. Thus, frequent orbit maneuvers are required to maintain the satellite at its designed position. During the orbit maneuver and recovery periods, the orbit quality of the maneuvered satellite computed with broadcast navigation ephemeris will be significantly degraded. Furthermore, the conventional dynamic Precise Orbit Determination (POD) approach may not work well, because of a lack of publicly available satellite information for modeling the thrust forces. In this paper, a near real-time approach free of thrust forces modeling is proposed for BDS GEO satellite orbit determination and maneuver analysis based on the Reversed Point Positioning (RPP). First, the station coordinates and receiver clock offsets are estimated by GPS/BDS combined Single Point Positioning (SPP) with single-frequency phase-smoothed pseudorange observations. Then, with the fixed station coordinates and receiver clock offsets, the RPP method can be conducted to determine the GEO satellite orbits. When no orbit maneuvers occur, the proposed method can obtain orbit accuracies of 0.92, 2.74, and 8.30?m in the radial, along-track, and cross-track directions, respectively. The average orbit-only Signal-In-Space Range Error (SISRE) is 1.23?m, which is slightly poorer than that of the broadcast navigation ephemeris. Using four days of GEO maneuvered datasets, it is further demonstrated that the derived orbits can be employed to characterize the behaviors of GEO satellite maneuvers, such as the time span of the maneuver as well as the satellite thrusting accelerations. These results prove the efficiency of the proposed method for near real-time GEO satellite orbit determination during maneuvers.     

Estimation and analysis of GPS receiver differential code biases using KGN in Korean Peninsula

The total electron content (TEC) estimation by the Global Positioning System (GPS) can be seriously affected by the differential code biases (DCB), referred to as inter-frequency biases (IFB), of the satellite and receiver so that an accuracy of GPS–TEC value is dependent on the error of DCBs estimation. In this paper, we proposed the singular value decomposition (SVD) method to estimate the DCB of GPS satellites and receivers using the Korean GPS network (KGN) in South Korea. The receiver DCBs of about 49 GPS reference stations in KGN were determined for the accurate estimation of the regional ionospheric TEC. They obtained from the daily solution have large biases ranging from +5 to +27 ns for geomagnetic quiet days. The receiver DCB of SUWN reference station was compared with the estimates of IGS and JPL global ionosphere map (GIM). The results have shown comparatively good agreement at the level within 0.2 ns. After correction of receiver DCBs and knowing the satellite DCBs, the comparison between the behavior of the estimated TEC and that of GIMs was performed for consecutive three days. We showed that there is a good agreement between KASI model and GIMs.     

Estimation of differential code biases with Jason-2/3 onboard GPS observations

With the continuous deployment of Low Earth Orbit (LEO) satellites, the estimation of differential code biases (DCBs) based on GNSS observations from LEO has gained increasing attention. Previous studies on LEO-based DCB estimation are usually using the spherical symmetry ionosphere assumption (SSIA), in which a uniform electron density is assumed in a thick shell. In this study, we propose an approach (named the SHLEO method) to simultaneously estimate the satellite and LEO onboard receiver DCBs by modeling the distribution of the global plasmaspheric total electron content (PTEC) above the satellite orbit with a spherical harmonic (SH) function. Compared to the commonly used SSIA method, the SHLEO model improves the GPS satellite DCB estimation accuracy by 13.46% and the stability by 22.34%, respectively. Compared to the GPS satellite DCBs estimated based on the Jason-3-only observations, the accuracy and monthly stability of the satellite DCBs can be improved by 14.42% and 26.8% when both Jason-2 and Jason-3 onboard observations are jointly processed. Compared with the Jason-2 solutions, the GPS satellite DCB estimates based on the fusion of Jason-2 and Jason-3 observations have an improved consistency of better than 18.26% and 9.71% with the products provided by the Center for Orbit Determination in Europe (CODE) and Chinese Academy of Sciences (CAS). Taking the DCB products provided by the German Aerospace Center (DLR) as references, there is no improvement in accuracy of the GPS satellite DCB estimates based on the fusion of Jason-2 and Jason-3 observations than the Jason-2 solutions alone. A periodic variation is found in the time series of both the Jason-3 and Jason-2 onboard receiver DCB estimates. Preliminary analysis of the PTEC distribution based on the estimated SH coefficients are also presented.     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.     

基于三频数据的北斗卫星导航系统DCB参数精度评估方法

差分码偏差（Differential Code Biases,DCB）参数作为导航电文中重要的一项,是影响用户PNT服务的主要误差源之一。北斗卫星导航系统（后文简称“北斗系统”）发射三个频点的导航信号,在导航电文中需要发播卫星的2个TGD（Timing Group Delay）参数。文章首先介绍了北斗系统卫星DCB参数最小二乘解算与形式误差评估;其次根据北斗系统三频特点,提出了不同频点组合计算垂直方向电离层电子总含量（VTEC）互差的DCB精度定量评估方法,并与IGS(International GNSS Service)提供的GPS卫星DCB精度进行比较;最后,详细分析了DCB参数精度对用户等效距离误差（UERE）计算和定位计算的影响,分别采用卫星出场标定DCB参数和经过解算DCB参数进行评估。实测数据分析结果表明,北斗系统卫星DCB参数解算形式误差与IGS解算GPS卫星DCB参数形式误差相当,但受卫星类型和解算测站的几何分布限制,北斗系统卫星DCB参数解算不确定度相比IGS略差,估计精度优于0.5ns,不同频率组合计算VTEC互差绝对值均值优于0.6TECU。相比采用卫星出场标定值,采用系统解算DCB参数后,双频用户三维位置误差改善13.80%～47.42%。     

GEO/IGSO混合区域导航星座的设计与优化算法

区域导航星座能够以较低成本和较短时间获得目标区域导航能力，且地球同步轨道是构建非极区区域导航星座的重要轨道类型。提出一种基于GEO（地球静止轨道）和IGSO（倾斜地球同步轨道）的区域导航星座设计方法。基于星下点轨迹特性构造对称星座设计参数和优化参数集，并考虑地球扁率长期摄动影响，计算星座轨道参数。以导航服务区的统计GDOP（几何精度因子）为目标函数，利用差分进化算法构建星座优化模型。以印度IRNSS的7星星座为例，仿真检验了设计和优化算法的正确性，讨论了IRNSS星座优化构型和轨道类型选取。本方法采用的对称星座设计参数少，能够提升GEO/IGSO混合区域导航星座的全局优化效率，为后续非对称星座快速提供最佳星数和构型设计。     

Cross testing of ionosphere models IRI-2001 and IRI-2007, data from satellite altimeters (Topex/Poseidon and Jason-1) and global ionosphere maps

In this study, we use a great body of statistical data covering the entire 23rd solar cycle to cross test data of satellite altimeters, Global Ionosphere Maps and the International Reference Ionosphere models, IRI-2001 and IRI-2007. It is revealed that experimental TEC values of the satellite altimeters regularly exceed the model ones by ∼3 TECU (1 TECU = 10¹⁶ m⁻²). The best possible value of difference between TECs obtained from altimeter and GIM-map data significantly differs for different laboratories: the maximum for CODG data falls on 2.5 TECU, ESAG – 3 TECU, JPLG – 0 TECU, UPCG – 2 TECU. The dependence of experimental and model data root-mean-square deviation on the F10.7 index is shown to be nearly linear. IRI-2001 and IRI-2007 relative errors are characterized by considerable 11-year and annual variations. Given the geomagnetic planetary index K_p under 7, IRI-2001 and IRI-2007 reproduce TEC in the ionosphere with an accuracy of ∼30% relative to measurement data from satellite altimeters. The amplitude of absolute error variations resulting from the difference in ionization enhancement between the model and the real ionosphere during the morning solar terminator transit is ∼5 TECU.     

星间链路联合磁测约束的低轨星座自主导航

为解决星座仅依靠星间链路测量进行自主导航时的整体旋转和漂移问题,提出一种星间链路联合磁测约束的低轨星座自主导航方法.通过星间观测相机和磁强计,获得同轨道相邻卫星视线矢量与地磁场方向之间的角距和地磁场模值,为低轨星座引入空间基准信息.在非秩亏性分析的基础上,分别建立状态方程和量测方程,利用扩展卡尔曼滤波方法进行整星座的最优状态估计.仿真结果表明,星座卫星自主导航位置精度优于20m,速度精度优于0.05m·s-1,自主导航运行时间维持180天,能够满足低轨卫星星座自主导航的应用需求.      

基于双频GPS观测的电离层TEC与硬件延迟反演方法

利用全球定位系统（Global Positioning System,GPS）的双频观测数据反演得到电离层的总电子含量（Total Electron Content,TEC）,使得广域甚至全球范围高时空分辨率的电离层观测研究成为可能,但由于GPS卫星和接收机对信号的硬件延迟可导致TEC测量系统偏差,因此,需要探索反演TEC并估测GPS卫星与接收机硬件延迟的有效算法.本文根据电离层电波传播理论,阐述了基于双频GPS观测提取电离层TEC的方法,给出TEC与硬件延迟的基本关系.综合研究了TEC与硬件延迟的反演方法,进行分析与归纳分类,在此基础上提出了有待深入研究的问题.      

On the uncertainties in the measurement of absolute (true) TEC over Indian equatorial and low latitude sectors

The Indian sector encompasses the equatorial and low latitude regions where the ionosphere is highly dynamic and is characterized by the equatorial ionization anomaly (EIA) resulting in large latitudinal electron density gradients causing errors and uncertainties in the estimation of range delays in satellite based navigation systems. The diurnal and seasonal variations of standard deviations in the TEC data measured during the low sunspot period 2004–2005 at 10 different Indian stations located from equator to the anomaly crest region and beyond are examined and presented. The day-to-day variability in TEC is found to be lowest at the equatorial station and increases with latitude up to the crest region of EIA and decreases beyond.     

GSO卫星系统布设中的通信干扰评估方法

针对地球静止轨道（GSO）卫星系统在卫星和地球站布设中的同频干扰评估问题，设计了地球站及卫星的全球分布对下行和上行通信链路的干扰评估场景，以及考虑波束业务特征影响的多条链路的集总干扰场景，构建了不同场景下的干扰评估和分析计算的模型，提出了一种基于干扰函数极值的评估方法。所提方法通过建立干扰系统地球站的随机分布集合和受扰系统的干扰函数，结合国际电联（ITU）提供的全球地形数据、天线波束参数、电磁波传播模型，能够实现对2个GSO卫星系统间的卫星轨位和地球站布设的定量化计算分析。采用所提方法对位于47°E±6°的GSO卫星系统、位于（23°N，26°E）地球站的同向下行链路，以及位于（23°N，26°E）的地球站对26°E±6°的GSO卫星系统的同向上行链路的干扰情况进行了定量化计算。结果表明:在卫星轨位间隔为2°时的干扰噪声比值为-12.29 dB，与ITU建议书中规定的-12.2 dB的限值之间的误差为0.7%，证明了所提方法的有效性和可行性。所提方法还可以统计GSO卫星系统在任意角度间隔和全球布设场景下的干扰分布情况，对于干扰评估和规避措施的制定具有一定的借鉴意义。      

Correction model of BDS satellite-induced code bias and its impact on precise point positioning

There are code biases on the pseudo-range observations of the Beidou Navigation Satellite System (BDS) that range in size from several decimeters to larger than one meter. These biases can be divided into two categories, which are the code biases in the pseudo-range observations of Inclined Geo-Synchronous Orbit (IGSO) satellites and Medium Earth Orbit (MEO) satellites and the code biases in the pseudo-range observations of Geosynchronous Earth Orbit (GEO) satellites. In view of the code bias of the IGSO/MEO satellites, the code bias correction model is established using the weighted least square curve fitting method. After the correction, the code biases of the IGSO and MEO satellites are clearly mitigated. A methodology of correcting GEO code bias is proposed based on the empirical mode decomposition (EMD)-wavelet transform (WT) coupled model. The accuracies of the GEO multipath combination of the B1, B2 and B3 frequencies are improved by 39.9%, 17.9%, and 29.4%, respectively. Based on the corrections above, the ten days observations of three Multi-GNSS Experiment (MGEX) stations are processed. The results indicate that the convergence time of the precise point positioning (PPP) can be improved remarkably by applying a code bias. The mean convergence time can be improved by 14.67% after the IGSO/MEO code bias correction. By applying the GEO code bias, the mean convergence time can be further improved by 17.42%.     

利用北斗观测数据实时监测中国区域电离层变化

北斗卫星导航信号采用三个频点工作,可以利用伪距双频组差方法解算电离层电子含量,为实时监视中国区域电离层变化提供新的技术手段.中国中低纬度处于电离层赤道异常变化区,在北纬20°±5°区域时常发生较大梯度的电离层变化.利用北斗实时多频伪距和相位观测数据,采用相位平滑伪距方法计算电离层穿刺点电子含量,分析通过北斗系统GEO卫星监测的电离层周日变化特性;采用多面函数方法拟合中国区域1°×1°分辨率的电离层延迟量,每5min绘制一幅中国区域电离层图,观测区域所有电离层穿刺点拟合残差RMS为2.778TECU;分析北斗系统实时监测中国区域电离层异常情况,当发生电离层异常变化时,相邻两天的VTEC（Vertical Total Electronic Content）峰值相差约60TECU.      

GPS derived TEC and foF2 variability at an equatorial station and the performance of IRI-model

The ionosphere induces a time delay in transionospheric radio signals such as the Global Positioning System (GPS) signal. The Total Electron Content (TEC) is a key parameter in the mitigation of ionospheric effects on transionospheric signals. The delay in GPS signal induced by the ionosphere is proportional to TEC along the path from the GPS satellite to a receiver. The diurnal monthly and seasonal variations of ionospheric electron content were studied during the year 2010, a year of extreme solar minimum (F10.7 = 81 solar flux unit), with data from the GPS receiver and the Digisonde Portable Sounder (DPS) collocated at Ilorin (Geog. Lat. 8.50°N, Long. 4.50°E, dip −7.9°). The diurnal monthly variation shows steady increases in TEC and F2-layer critical frequency (foF2) from pre-dawn minimum to afternoon maximum and then decreases after sunset. TEC show significant seasonal variation during the daytime between 0900 and 1900 UT (LT = UT + 1 h) with a maximum during the March equinox (about 35 TECU) and minimum during the June solstice (about 24 TECU). The GPS-TEC and foF2 values reveal a weak seasonal anomaly and equinoctial asymmetry during the daytime. The variations observed find their explanations in the amount of solar radiation and neutral gas composition. The measured TEC and foF2 values were compared with last two versions of the International Reference Ionosphere (IRI-2007 and IRI-2012) model predictions using the NeQuick and CCIR (International Radio Consultative Committee) options respectively in the model. In general, the two models give foF2 close to the experimental values, whereas significant discrepancies are found in the predictions of TEC from the models especially during the daytime. The error in height dependent thickness parameter, daytime underestimation of equatorial drift and contributions of electrons from altitudes above 2000 km have been suggested as the possible causes.     

Application of BDS-GEO for studying TEC variability in equatorial ionosphere on different time scales

The Earth's ionosphere and especially its equatorial part is a highly dynamical medium. Geostationary satellites are known to be a powerful tool for ionospheric studies. Recent developments in BDS-GEO satellites allow such studies on the new level due to the best noise pattern in TEC estimations, which corresponds to those of GPS/GLONASS systems. Here we used BDS-GEO satellites to demonstrate their capability for studying equatorial ionosphere variability on different time scales. Analyzing data from the equatorial SIN1 IGS station we present seasonal variations in geostationary slant TEC for the periods of high (October 2013 - October 2014) and low (January 2017 - January 2018) solar activity, which show semi-annual periodicity with amplitudes about 10 TECU during solar maximum and about 5 TECU during the solar minimum. The 27-day variations are also prominent in geostationary slant TEC variations, which correlates quite well with the variations in solar extreme UV radiation. We found semi-annual pattern in small scale ionospheric disturbances evaluated based on geostationary ROTI index: maximal values correspond to spring and fall equinoxes and minimum values correspond to summer and winter solstices. The seasonal asymmetry in ROTI values was observed: spring equinox values were almost twice as higher than fall equinox ones. We also present results on the 2017 May 28–29 G3 geomagnetic storm, when ～30 TECU positive anomaly was recorded, minor and final major sudden stratospheric warmings in February and March 2016, with positive daytime TEC anomalies up to 15–20 TECU, as well as the 2017 September 6 X9.3 solar flare with 2 TECU/min TEC rate. Our results show the large potential of geostationary TEC estimations with BDS-GEO signals for continuous monitoring of space weather effects in low-latitude and equatorial ionosphere.     

Beidou wide-area augmentation system clock error correction and performance verification

On December 27, 2018, the Beidou-3 System (BDS-3) has completed the deployment of 18 Medium Earth Orbit (MEO) satellites combined as a space constellation. In addition to the augmentation information for the new system signals B1C and B2a, the BDS-3 is compatible with the three augmentation information broadcast by the BDS-2 system for B1I and B3I signals: equivalent clock error correction, User Differential Ranging Error (UDRE) and Grid Ionosphere Vertical Error (GIVE). In this paper, the observation data of Beidou monitoring network are used to analyze the pseudo-range observation quality of the smooth transition signals B1I and B3I of BDS-2 and BDS-3. At the same time, the relationship between the equivalent clock error correction and the prediction error of the satellite clock is analyzed by using the Two-Way Satellite Time and Frequency Transfer (TWSTFT) data. The results show that the correlation between the equivalent clock error correction and the monitored clock error by using the TWSTFT data is greater than 60%. We calculate the UDRE by using the equivalent clock error correction. The results show that the satellite equivalent clock error correction can improve the accuracy of User Equivalent Range Error (UERE) by about 50%. This paper also compares the positioning accuracy of the BDS-2 satellites with the BDS-2 satellites combined BDS-3 satellites. The results show that the three-dimensional positioning accuracy is improved by about 30% after the BDS-3 satellites are added.