Solar Energetic Particle Composition, Energy Spectra, and Space Weather

Recent progress in measuring the composition and energy spectra of solar energetic particles (SEPs) accelerated by CME-driven shocks is reviewed, including a comparison of the observed charge-to-mass dependence of breaks in SEP spectra with model predictions. Also discussed is a comparison of SEP and CME kinetic energies in seventeen large SEP events, and estimates of the SEP radiation dose that astronauts would be subject to once they venture outside the protective cover of Earth’s magnetosphere.     

The Energetic Particle and Plasma Spectrometer Instrument on the MESSENGER Spacecraft

The Energetic Particle and Plasma Spectrometer (EPPS) package on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission to Mercury is composed of two sensors, the Energetic Particle Spectrometer (EPS) and the Fast Imaging Plasma Spectrometer (FIPS). EPS measures the energy, angular, and compositional distributions of the high-energy components of the in situ electrons (>20 keV) and ions (>5 keV/nucleon), while FIPS measures the energy, angular, and compositional distributions of the low-energy components of the ion distributions (<50 eV/charge to 20 keV/charge). Both EPS and FIPS have very small footprints, and their combined mass (∼3 kg) is significantly lower than that of comparable instruments.     

航天中心软件的一个领域工程方法和模型

软件复用被视为提高软件开发效率和产品质量的有效途径。研究和实践表明,针对特定领域的软件复用容易取得成功。本文给出了一个基于UML2．0和体系结构视图、针对航天中心软件特点的领域工程建模方法,具体分析和设计了相应的一系列领域工程模型,它们可以成为航天中心软件复用的“核心资产”,为未来的各个应用系统开发提供有力支持。     

The Analyzer of Space Plasmas and Energetic Atoms (ASPERA-3) for the Mars Express Mission

The general scientific objective of the ASPERA-3 experiment is to study the solar wind – atmosphere interaction and to characterize the plasma and neutral gas environment with within the space near Mars through the use of energetic neutral atom (ENA) imaging and measuring local ion and electron plasma. The ASPERA-3 instrument comprises four sensors: two ENA sensors, one electron spectrometer, and one ion spectrometer. The Neutral Particle Imager (NPI) provides measurements of the integral ENA flux (0.1–60 keV) with no mass and energy resolution, but high angular resolution. The measurement principle is based on registering products (secondary ions, sputtered neutrals, reflected neutrals) of the ENA interaction with a graphite-coated surface. The Neutral Particle Detector (NPD) provides measurements of the ENA flux, resolving velocity (the hydrogen energy range is 0.1–10 keV) and mass (H and O) with a coarse angular resolution. The measurement principle is based on the surface reflection technique. The Electron Spectrometer (ELS) is a standard top-hat electrostatic analyzer in a very compact design which covers the energy range 0.01–20 keV. These three sensors are located on a scanning platform which provides scanning through 180^∘ of rotation. The instrument also contains an ion mass analyzer (IMA). Mechanically IMA is a separate unit connected by a cable to the ASPERA-3 main unit. IMA provides ion measurements in the energy range 0.01–36 keV/charge for the main ion components H⁺, He⁺⁺, He⁺, O⁺, and the group of molecular ions 20–80 amu/q. ASPERA-3 also includes its own DC/DC converters and digital processing unit (DPU).     

The Solar Energetic Particle Ionic Charge Analyzer (SEPICA) and the Data Processing Unit (S3DPU) for SWICS,SWIMS and SEPICA

The Solar Energetic Particle Ionic Charge Analyzer (SEPICA) is the main instrument on the Advanced Composition Explorer (ACE) to determine the ionic charge states of solar and interplanetary energetic particles in the energy range from ≈0.2 MeV nucl−1 to ≈5 MeV charge−1. The charge state of energetic ions contains key information to unravel source temperatures, acceleration, fractionation and transport processes for these particle populations. SEPICA will have the ability to resolve individual charge states and have a substantially larger geometric factor than its predecessor ULEZEQ on ISEE-1 and -3, on which SEPICA is based. To achieve these two requirements at the same time, SEPICA is composed of one high-charge resolution sensor section and two low- charge resolution, but large geometric factor sections. The charge resolution is achieved by the focusing of the incoming ions, through a multi-slit mechanical collimator, deflection in an electrostatic analyzer with a voltage up to 30 kV, and measurement of the impact position in the detector system. To determine the nuclear charge (element) and energy of the incoming ions, the combination of thin-window flow-through proportional counters with isobutane as counter gas and ion-implanted solid state detectors provide for 3 independent ΔE (energy loss) versus E (residual energy) telescopes. The multi-wire proportional counter simultaneously determines the energy loss ΔE and the impact position of the ions. Suppression of background from penetrating cosmic radiation is provided by an anti-coincidence system with a CsI scintillator and Si-photodiodes. The data are compressed and formatted in a data processing unit (S3DPU) that also handles the commanding and various automatted functions of the instrument. The S3DPU is shared with the Solar Wind Ion Charge Spectrometer (SWICS) and the Solar Wind Ion Mass Spectrometer (SWIMS) and thus provides the same services for three of the ACE instruments. It has evolved out of a long family of data processing units for particle spectrometers. This revised version was published online in June 2006 with corrections to the Cover Date.     

Heliosheath Processes and the Structure of the Heliopause: Modeling Energetic Particles,Cosmic Rays,and Magnetic Fields

This paper summarizes the results obtained by the team “Heliosheath Processes and the Structure of the Heliopause: Modeling Energetic Particles, Cosmic Rays, and Magnetic Fields” supported by the International Space Science Institute (ISSI) in Bern, Switzerland. We focus on the physical processes occurring in the outer heliosphere, especially at its boundary called the heliopause, and in the local interstellar medium. The importance of magnetic field, charge exchange between neutral atoms and ions, and solar cycle on the heliopause topology and observed heliocentric distances to different heliospheric discontinuities are discussed. It is shown that time-dependent, data-driven boundary conditions are necessary to describe the heliospheric asymmetries detected by the Voyager spacecraft. We also discuss the structure of the heliopause, especially due to its instability and magnetic reconnection. It is demonstrated that the Rayleigh–Taylor instability of the nose of the heliopause creates consecutive layers of the interstellar and heliospheric plasma which are magnetically connected to different sources. This may be a possible explanation of abrupt changes in the galactic and anomalous cosmic ray fluxes observed by Voyager 1 when it was crossing the heliopause structure for a period of about one month in the summer of 2012. This paper also discusses the plausibility of fitting simulation results to a number of observational data sets obtained by in situ and remote measurements. The distribution of magnetic field in the vicinity of the heliopause is discussed in the context of Voyager measurements. It is argued that a classical heliospheric current sheet formed due to the Sun’s rotation is not observed by in situ measurements and should not be expected to exist in numerical simulations extending to the boundary of the heliosphere. Furthermore, we discuss the transport of energetic particles in the inner and outer heliosheath, concentrating on the anisotropic spatial diffusion diffusion tensor and the pitch-angle dependence of perpendicular diffusion and demonstrate that the latter can explain the observed pitch-angle anisotropies of both the anomalous and galactic cosmic rays in the outer heliosheath.     

Automation and Robotics for the Space Station: Recommendations

On January 25, 1984, President Reagan announced a United States program to place a permanent space station in orbit in 1992. The Congressional bill appropriating the funding for this program requires that a significant portion of the program funds be for the development of new automation and robotics technologies not in use on existing spacecraft. To assist it in developing plans to meet this requirement, NASA established an Automation and Robotics Panel in August 1984. This paper presents verbatim the Executive Summary of the Panel's report to NASA. It should be recognized that this report to NASA is advisory only, and that for a variety of reasons, including funding, what is actually implemented will certainly differ in many respects from the recommendations. Nevertheless, the report represents the thinking of a prestigious group of scholars and practitioners in automation and robotics, and many of the recommendations undoubtedly will be implemented. A summary of the NASA recommendations will be published following their official release.