共查询到20条相似文献,搜索用时 31 毫秒
1.
2.
3.
数据采集分系统上行链路在整星EMC试验中受到干扰,文章描述了为抗干扰采取的屏蔽、隔离等相关措施。结果表明:姿态与轨道控制分系统两台星敏感器对外传导发射干扰和HW数传分系统编码器对外辐射发射干扰均已减弱,并且改善了数据收集分系统工作的电磁环境,从而使其上行链路干扰从15dB减少到4dB,证实所采取的EMC抗干扰措施有效,数据收集分系统、姿态与轨道控制分系统和HW数传分系统之间是电磁兼容的。 相似文献
4.
为在无陀螺或陀螺故障时可用星敏感器估计姿态角速度,在扩展卡尔曼滤波(EKF)和非线性预测滤波的基础上提出了基于四元数的卫星角速度估计算法,并给出了相应的模型。该算法对角速度建模精度的要求较低,无需卫星动力学方程,方法简单且易于实现。仿真结果表明,算法的精度较高。虽然仍受噪声和步长的影响,但相对基于EKF和最小模型误差的角速度估计算法,其性能改善较大。 相似文献
5.
The paper discusses the results of a star scan test performed on the spin stabilized Geostationary Meteorological Satellite (GMS) and used for the purpose of determining the vehicle's spin state. The test data shows that the payload camera, normally used for imaging the Earth and its cloud cover, sees a sufficient number of stars to provide for a rapid and accurate spin state update and that Earth and Sun blockage constraints have essentially no impact on the star detection process. Also presented are analytical results regarding how many stars constitute an observable set, the accuracy achievable using the five most easily detected stars, how star location affects state uncertainty, and why certain state components are more easily determined than others. The primary test conclusion is that star scan offers an attractive alternative to the presently used Earth horizon and landmark tracking attitude determination methods, as far as accuracy and computational complexity are concerned, provided the occasional star viewing intervals that are required do not interfere with the meteorological scheduling of the camera. 相似文献
6.
7.
星敏感器测量模型及其在卫星姿态确定系统中的应用 总被引:12,自引:2,他引:12
星敏感器是卫星高精度姿态测量的重要部件,如何正确建立其测量误差模型是影响姿态确定精度的关键因素。本文推导出星敏感器三轴姿态测量误差的方差计算公式,对测量误差的性质进行研究,揭示了在星敏感器三轴测量中,光轴测量精度劣于根据另两轴测量所确定的光轴指向精度。在此基础上提出了新的星敏感器测量模型,给出改进的姿态滤波器观测方程,减小了观测误差,由此可以进一步提高姿态确定的精度。本文方法不仅适用于通常使用的双星敏感器姿态确定系统,也可独立地应用于只带单个星敏感器的姿态确定系统。 相似文献
8.
对遥感卫星高精度高稳定度控制技术进行了综述。给出了国内外高稳定度多挠性遥感卫星控制、快速机动控制、高精度姿态确定、自主智能控制等典型应用,以及未来发展趋势。分析了挠性多体卫星结构-控制一体化设计、卫星在轨试验和高精度姿态确定等关键技术。讨论了挠性多体卫星动力学建模仿真及地面试验验证,H∞控制、自适应滤波前馈等卫星姿态控制方法研究与应用,卫星结构模态与无干扰力矩在轨辨识,以及基于陀螺、星敏感器及其误差、卫星动力学模型、在轨热变形标定等高精度姿态确定技术。 相似文献
9.
The deep space 1 extended mission 总被引:2,自引:0,他引:2
The primary mission of Deep Space 1 (DS1), the first flight of the New Millennium program, completed successfully in September 1999, having exceeded its objectives of testing new, high-risk technologies important for future space and Earth science missions. DS1 is now in its extended mission, with plans to take advantage of the advanced technologies, including solar electric propulsion, to conduct an encounter with comet 19P/Borrelly in September 2001. During the extended mission, the spacecraft's commercial star tracker failed; this critical loss prevented the spacecraft from achieving three-axis attitude control or knowledge. A two-phase approach to recovering the mission was undertaken. The first involved devising a new method of pointing the high-gain antenna to Earth using the radio signal received at the Deep Space Network as an indicator of spacecraft attitude. The second was the development of new flight software that allowed the spacecraft to return to three-axis operation without substantial ground assistance. The principal new feature of this software is the use of the science camera as an attitude sensor. The differences between the science camera and the star tracker have important implications not only for the design of the new software but also for the methods of operating the spacecraft and conducting the mission. The ambitious rescue was fully successful, and the extended mission is back on track. 相似文献
10.
This paper proposes a novel multiple model estimator for the satellite attitude determination system composed of gyroscopes and star sensors. The main objective is to calibrate the low frequency error of the star sensor and improve the attitude determination accuracy. In the proposed approach, first, the specific frequencies of the low frequency error is extracted according to the frequency spectrum of the estimate of the gyroscope drift obtained from a standard Kalman filter; then, a bank of Kalman filters based on multiple models is implemented to identify the amplitudes of the error signals with the specific frequencies, such that a reference model is obtained to compensate for the effects of the low frequency error. Simulation results indicate that the proposed approach outperforms the existing calibration approach based on the state augmentation technique. 相似文献
11.
地球静止轨道(GEO)光学遥感卫星的相机每天午夜时分存在阳光入侵问题,致使相机焦面存在潜在损伤,严重时将影响卫星的使用寿命。文章调研了国内外GEO光学遥感卫星针对此问题的解决方式,在综合考虑相机、电能、机动、热控、测控等各项影响因素之后,提出了一种应用约束规避算法的阳光入侵规避方法,首先将卫星设计的工程约束条件转换为空间几何约束条件,通过将明确约束参数后的算法引入卫星姿态控制器来调整卫星姿态指向,避免阳光入侵相机内部。典型工况的仿真分析结果表明:在规避过程中,相机光轴矢量与阳光入射矢量夹角满足约束条件,此方法有效,可满足卫星在轨应用。 相似文献
12.
13.
14.
TDICCD相机安装精度对系统调制传递函数的影响 总被引:2,自引:1,他引:1
论述了对TDICCD相机安装精度导致调制传递函数(MTF)下降的机理,定量分析了TDICCD相机安装精度对MTF的影响程度,并分析了TDICCD相机安装精度与卫星飞行姿态的耦合效应对MTF的影响。文章的分析方法,可为合理确定TDICCD相机的安装精度指标提供理论分析的依据。 相似文献
15.
16.
星敏感器是卫星高精度姿态测量系统中的重要器件,根据其测量可以建立不同形式的星敏感器测量模型,准确分析测量模型中测量误差的特性是保证卫星姿态确定精度的重要条件。本文针对广泛采用的星敏感器光轴矢量测量方程,从几何角度出发,结合实际情况,提出了一种新颖的星敏感器光轴测量的锥面误差模型。在两个锥面参数分别服从一定的概率分布的条件下,对测量误差特性进行了深入分析,确定出新的测量误差协方差矩阵。上述研究能够在不增加算法计算量的前提下,从新的角度,更为直观地建立了星敏感器光轴矢量测量模型。最后在仿真实验中,将新的锥面误差测量模型应用于基于扩展卡尔曼滤波(EKF)的姿态确定方法中,结果表明了利用该测量模型进行姿态确定的有效性。 相似文献
17.
18.
考虑卫星轨道运动和像移影响的星敏感器星图模拟方法 总被引:2,自引:0,他引:2
星图模拟技术是星图识别算法和星敏感器性能测试的基础.提出一种新的高精度星图模拟方法.该方法分为三个步骤:首先,利用两行轨道数据(TLE,Two-Line Orbital Element)与简化常规/深空扰动的近似解模型(SGP4/SDP4)计算出卫星在轨运行参数,进而获得卫星姿态矩阵;然后,根据星敏感器的方位和俯仰角度,确定星敏感器视场中的导航星及星敏感器安装矩阵,利用小孔成像模型,获得导航星在星敏感器成像面的投影位置;最后,为更准确模拟实际星像点的灰度扩散,在考虑卫星运动引起的恒星像移的基础上,按照二维高斯分布规律置灰度值来模拟星像点像素.在此基础上,还详细分析了不同曝光时间下,恒星像移对恒星位置测量的影响. 相似文献
19.
基于模型误差确定卫星姿态的预测滤波算法 总被引:5,自引:2,他引:5
本文给出了一种高精度、鲁棒性强的实时姿态估计算法,即预测滤波算法。该算法利用星敏感器所提供的观测矢量,对运动学方程中由陀螺漂移造成的角速度模型误差进行一步预测,从而准确地估计卫星的运动姿态和角速度。预测滤波算法的良好性能已通过仿真测试得到了验证。文中进一步提出的修正算法,使滤波器的预测性能得到了改进。 相似文献
20.
针对星上计算机运算资源有限的问题,为了降低卫星姿态确定系统故障诊断的运算量,提出一种基于卡尔曼滤波器的故障检测与分离方法。该方法首先基于卫星姿态运动方程设计了一种加性卡尔曼滤波器,然后将卡尔曼滤波器与简化观测器思想相结合,进一步提出一种采用简化滤波器思想的姿态敏感器故障诊断律。所提出的故障诊断方法既可以实现对陀螺故障的检测与分离,又能够诊断星敏感器的故障。此外,该方法只利用一个滤波器即可实现故障检测与分离,其计算量小,有利于在轨实施。最终采用一个由三正交一斜装陀螺组件和星敏感器构成的姿态确定系统对所提出的方法进行了仿真校验,仿真结果表明了所提方法的有效性。 相似文献