共查询到19条相似文献,搜索用时 560 毫秒
1.
某探测器上火箭发动机热防护仿真与设计 总被引:2,自引:2,他引:0
根据某探测器的具体结构及工作条件,分析和计算探测器上火箭发动机的热环境参数.利用有限元法计算火箭发动机固壁辐射热流密度,依据热流边界条件设计热防护方案;利用有效发射率表征多层隔热材料隔热性能并进行温度场数值仿真.由于多层隔热材料性能参数的不易确定性,计算了参数在较大范围内的热防护效果.通过仿真计算验证热防护方案的有效性和可靠性,并分析影响热防护效果的主要因素;计算结果表明多层隔热材料的有效发射率是影响隔热性能最重要的因素,比热容、表面发射率、密度对热防护性能影响很小. 相似文献
2.
3.
4.
5.
基于多层隔热材料稳态辐射导热耦合传热提出一种多层隔热材料热设计方法,可以根据反射屏分布规律实现多层隔热材料热设计,给出最优反射屏数目和每层隔热材料的厚度.采用提出的热设计方法开展了热设计算例研究,结果表明:对按照层等温降和层等厚度规律设计的多层隔热材料,等厚度规律设计比等温降规律设计更能降低隔热材料的总质量,研究结果对多层隔热材料热设计研究具有一定的指导作用. 相似文献
6.
7.
将纳米多孔结构和多层反射屏引入柔性隔热毡中,设计出一种具有多层反射结构的柔性纳米隔热材料,并结合材料的微观结构对其隔热机理进行了分析.结果表明:多层反射屏抑制了材料的红外辐射传热量,纳米多孔结构降低了气体导热和对流传热,有效地提高了材料的隔热性能. 相似文献
8.
以热防护系统隔热组合结构中不同隔热材料厚度尺寸为计算变量,以飞行器主结构温度极值即最低背面温度为目标参数,以组合结构中第二层材料最高使用温度为约束条件建立隔热组合结构模型,并进行了石英灯考核验证。采用通用软件ANSYS 进行一维瞬态有限元热分析,将模型计算结果和试验结果进行了全面对比,各项数据吻合良好。 相似文献
9.
为解决高速飞行器飞行过程中剧烈的气动加热问题,以“高温防热层+隔热缓冲层+核心隔热层”顺序设计的一体化多层热防护结构的传热过程为研究对象,建立了高温环境下热防护结构内部一维非稳态导热-辐射耦合传热模型,通过数值模拟计算得到了高温环境下热防护结构各层的温度分布。利用不同热防护材料的隔热性能差异,针对构建的热防护结构,提出了在满足一定约束条件下,以轻质多层热防护结构总质量和总厚度为目标函数的优化设计方案,得到了多层结构的最优几何参数,并通过实验考核了优化后热防护结构的防隔热性能。实验表明:该结构可耐受1 473 K的高温1 800 s而背温不超过370 K。 相似文献
10.
在系统地对桨叶结构设计流程、结构分析计算方法进行研究的基础上,通过对桨叶组件参数化定义及桨叶铺层三维几何建模方法的扩展,自动获得各桨叶剖面相关组件的几何和材料信息,并基于闭口薄壁梁理论,给出了复合材料桨叶剖面扭转刚度的高效计算方法.该方法一方面充分考虑了复合材料蒙皮铺层的复杂结构以及梁、肋等组件的细节几何模型,避免了三维几何模型简化误差;另一方面,提出了铺层块、等效厚度以及长厚比概念,并采用解析表达,将模型几何解构完全集成于桨叶设计过程自动完成,十分便于工程应用.实例验证表明:提出的方法能够快速、可靠地完成桨叶剖面扭转刚度计算,显著提高设计分析效率. 相似文献
11.
Calculation of high-temperature insulation parameters and heat transfer behaviors of multilayer insulation by inverse problems method 总被引:1,自引:0,他引:1
In the present paper, a numerical model combining radiation and conduction for porous materials is developed based on the finite volume method. The model can be used to investigate high-temperature thermal insulations which are widely used in metallic thermal protection systems on reusable launch vehicles and high-temperature fuel cells. The effective thermal conductivities(ECTs) which are measured experimentally can hardly be used separately to analyze the heat transfer behaviors of conduction and radiation for high-temperature insulation. By fitting the effective thermal conductivities with experimental data, the equivalent radiation transmittance, absorptivity and reflectivity, as well as a linear function to describe the relationship between temperature and conductivity can be estimated by an inverse problems method. The deviation between the calculated and measured effective thermal conductivities is less than 4%. Using the material parameters so obtained for conduction and radiation, the heat transfer process in multilayer thermal insulation(MTI) is calculated and the deviation between the calculated and the measured transient temperatures at a certain depth in the multilayer thermal insulation is less than 6.5%. 相似文献
12.
13.
Based on the topological representation and transformation of the elementary chevron structure module, we propose the dependences that relate the geometrical parameters of rollers with the chevron structure element sizes for the transverse scheme of rotary creasing and bending. The calculation scheme is realized in the form of the parametrized geometrical model using CAD SolidWorks aids. 相似文献
14.
多层隔热组件包覆于卫星外表面,占据了整星表面的60%以上,既是必要的热控组件,也是抑制空间强电磁环境源的重要载体。相较于卫星内部组件,星表直接面临高能粒子的冲击与作用,导致其在轨面临的静电威胁极为严峻。其本质原因是高能电子穿透多层隔热组件的面膜,沉积于多层组件内部间隔层,进而在介质材料层形成了内建电场,造成静电放电效应。针对多层隔热组件的复合结构特点,建立了合理优化的内带电物理模型及其计算模型,模拟了GEO环境电子在典型多层隔热组件电子输运过程,进而计算明晰了间隔层涤纶网的电场分布特性。结果表明,在GEO恶劣电子辐射环境下,多层涤纶网充电电场强度可高达9.7×108 V/m,存在放电风险;涤纶网接地边、角处的电场强度最高且电场畸变幅度巨大;多层充放电风险主要来自涤纶网与反射屏之间的非紧密接触而伴随的不良接地情况,建议通过加密棉线缝合间距以提升涤纶网与反射屏的接触效果,从而降低多层的充放电风险。 相似文献
15.
赵淑媛%张博明%赫晓东 《宇航材料工艺》2006,36(Z1):23-27
针对重复使用运载器热防护系统纤维隔热毡内部导热和辐射的耦合换热问题进行了分析,应用有限差分法建立了纤维隔热毡的数值分析模型.通过数值求解传热方程,计算了稳态的有效热导率.计算结果表明辐射和气体传导是纤维隔热毡内的主要传热方式,辐射作用随压力和试样密度的增加而降低,在试样温度高的一侧辐射是主要的传热方式,而在温度低的一侧气体传导为主要的传热方式;试样的有效热导率随纤维的平均直径、压力和温差的增加而增加,随试样密度的增加而降低.本文的计算结果与文献中的实验结果吻合较好,可以为纤维隔热毡及热防护系统的优化设计提供理论参考. 相似文献
16.
在分析现有飞机泄漏探测系统性能的基础上,提出了一种基于多层绝热的飞机空气导管泄漏探测结构.推导了该种多层绝热的工程计算方法,并对不同管径的导管进行了绝热层设计计算.其次,为了验证该计算方法的准确性,搭建了高温压力管道空气绝热试验平台,获得了不同温度下空气绝热层的外表面温度.同时,采用数值分析方法进一步考察了导流洞数量及导流洞直径对绝热设计计算的影响.最后,根据导流洞对绝热设计的影响进行了结构优化.研究结果表明:该结构与传统的泄漏探测系统相比具有对泄漏的高温气流具有快速导流作用,保证泄漏探测系统能及时探测到泄漏信号并作出报警响应;绝热层外表面温度的计算值比试验值偏大,最大误差为23.08%.随着导流洞孔径和个数的增加,绝热层外表面的平均温度减少,并且导流洞个数的增加对绝热层外表面温度的影响较大.该研究结果为飞机空气导管的国产化提供参考依据. 相似文献
17.
航天器在轨全过程表面辐射热计算数值仿真研究 总被引:1,自引:0,他引:1
对在轨航天器表面辐射热计算进行了全过程数值仿真研究。航天器结构较复杂,针对不同结构进行区域分解,对几何模型进行相应的规则化,同时采用结构化网格和非结构化网格建立通用的计算网格自生成技术。仿真过程重点考虑了任意曲面的网格自动划分和任意形状交界面的数据传递,兼顾几何结构、物理过程、计算精度和计算速度。将有限元法和能束均匀分布法相结合计算角系数和辐射传递系数。将积分法和能束均匀分布法相结合计算外热流。由于在轨航天器表面多用多层隔热组件包裹,针对这部分结构采用节点网络法和控制容积法计算其表面温度,而未被包裹的结构采用有限元法计算其表面温度。对具有辐射换热关系的非连通区域温度场的有限元计算进行了分析和公式推导。最后,用Microsoft VC++6.0编程设计开发了近地轨道航天器表面辐射热计算仿真软件。 相似文献
18.
《Aerospace Science and Technology》1999,3(2):83-91
The current development of crash calculation codes associated with the significant improvement in the performance of data processing facilities allow us to consider, in an industrial framework and under interesting economical conditions, numerical simulations of the impact on water of a deformable structure. A transient fast dynamic finite element method has been chosen for its potential to model the nonlinearities of the structure, geometrical, material or contact nonlinearities. It is evaluated here for various test cases for which the analytical and numerical results are available.The correlations between calculations and reference results, and their costs, allow such an approach to be validated subject to a definitive validation on a representative structure. 相似文献
19.
ZHANG Jia-lei LU Zi-xing 《中国航空学报》2007,20(3):215-222
The random models of open-cell foams that can reflect the actual cell geometrical properties are constructed with the Voronoi technique. The compression process of elastic open-cell foams is simulated with the nonlinear calculation module of finite element analysis program. In order to get the general results applicable to this kind of materials, the dimensionless compressive stress is used and the stress-strain curves of foam models with different geometrical properties are obtained. Then, the influences of open-cell geometrical properties, including the shape of strut cross section, relative density and cell shape irregularity, on the compressive nonlinear mechani- cal performance are analyzed. In addition, the numerical results are compared with the predicted results of cubic staggering model. Numerical results indicate that the simulated results reflect the compressive process of foams quite well and the geometrical properties of cell have significant influences on the nonlinear mechanical behavior of foams. 相似文献