Ares I–X Flight Test Vehicle similitude to the Ares I Crew Launch Vehicle

The Ares I–X Flight Test Vehicle is the first in a series of flight test vehicles that will take the Ares I Crew Launch Vehicle design from development to operational capability. Ares I–X is scheduled for a 2009 flight date, early enough in the Ares I design and development process so that data obtained from the flight can impact the design of Ares I before its Critical Design Review. Decisions on Ares I–X scope, flight test objectives, and FTV fidelity were made prior to the Ares I systems requirements being baselined. This was necessary in order to achieve a development flight test to impact the Ares I design. Differences between the Ares I–X and the Ares I configurations are artifacts of formulating this experimental project at an early stage and the natural maturation of the Ares I design process. This paper describes the similarities and differences between the Ares I–X Flight Test Vehicle and the Ares I Crew Launch Vehicle. Areas of comparison include the outer mold line geometry, aerosciences, trajectory, structural modes, flight control architecture, separation sequence, and relevant element differences. Most of the outer mold line differences present between Ares I and Ares I–X are minor and will not have a significant effect on overall vehicle performance. The most significant impacts are related to the geometric differences in Orion Crew Exploration Vehicle at the forward end of the stack. These physical differences will cause differences in the flow physics in these areas. Even with these differences, the Ares I–X flight test is poised to meet all five primary objectives and six secondary objectives. Knowledge of what the Ares I–X flight test will provide in similitude to Ares I—as well as what the test will not provide—is important in the continued execution of the Ares I–X mission leading to its flight and the continued design and development of Ares I.     

Calibration and flight results for the Ares I-X 5-hole probe

Flight and calibration results are presented for the Ares I-X 5-hole probe. The probe is calibrated by using a combination of wind tunnel, CFD, and other numerical modeling techniques. This is then applied to the probe flight data and comparisons are made between the vanes and 5-hole probe. Using this and other data it is shown the probe was corrupted by water rendering that measurement unreliable.     

运载火箭新型地面测试发控系统构想

为了提高我国地面测试发控系统整体水平，在借鉴和继承国内外成熟型号地面测试发控系统优秀设计思想的基础上，结合现代运载火箭技术需求，通过对总体设计、任务和功能分析、框架组建等方面的分析和论述，提出了新型运载火箭地面测试发控系统方案构想。此方案在总体设计思想、系统框架结构设计、应用模式上提出新的思路，对于适应未来运载火箭发射要求提供了技术途径。     

X-38, CRV and CRV Evolution Program Overview and European Role

The X-38 Project forms part of the “X” prototype vehicle family developed by the United States. Its development was initiated by NASA to prepare the Crew Return Vehicle (CRV). The European participation in the X-38 Program has been significantly extended since the start of the X-38 cooperation in 1997 and is realized by ESA's “Applied Reentry Technology Program” and the German/DLR “Technologies for Future Space Transportation Systems” (TETRA) Project. European contributions to the X-38 Vehicle 201, (V-201) can be found in all technical key areas. The orbital flight and reentry with the X-38 V-201 will conclude the X-38 project in 2002.The CRV will be used from about mid-2005 as ’ambulance‘, ’lifeboat‘ or as alternate return vehicle for the crew of the International Space Station. Recognizing the very productive and mutually beneficial cooperation established on X-38, NASA and ESA have decided to continue this cooperation into the development of the operational CRV. The Phase C/D will be completed shortly after the Critical Design Review, scheduled for August 2002. The CRV production phase will start in October 2002 and will cover production of four CRV vehicles, ending in 2006.Based on the objective to identify a further evolution potential of the CRV towards a Crew Cargo Transfer Vehicle (CCTV), NASA has implemented upgrade studies in the CRV Phase C/D.     

运载火箭智慧控制系统技术研究

总结了国内外先进运载火箭控制系统的特点,结合我国新一代运载火箭的现状,提出目前我国运载火箭控制系统发展亟待解决的问题。在此基础上,提出了适应现阶段智能高可靠需求的自主轨道规划技术、在线故障辨识技术、姿控喷管隔离重构技术和全程四元数控制技术,所提技术可有效提高控制系统可靠性,使全箭在面对非灾难性故障时具有较强的自主性和适应性。     

日本新型的J—I火箭

１９９６年２月日本成功地发射了携带超音速试验飞行器的新型Ｊ－Ｉ火箭。Ｊ－Ｉ火箭的概况、运载能力和飞行时序、制导控制系统、遥测和通讯系统以及试验在本文中作了介绍。     

运载火箭基于模型的系统工程研究

阐述了航天系统工程概念的来源和实践方法,对基于模型的系统工程(Model Based Systems Engineering, MBSE)概念及其发展现状进行了综述。结合运载火箭的数字化研制进展,提出了运载火箭基于模型的系统工程设想及其可能产生的效益,分析了需要解决的关键技术、存在的问题与挑战,对未来发展进行了展望。     

Piloted operations at a near-Earth object (NEO)

In late 2006, NASA's Constellation Program sponsored a study to examine the feasibility of sending a piloted Orion spacecraft to a near-Earth object. NEOs are asteroids or comets that have perihelion distances less than or equal to 1.3 astronomical units, and can have orbits that cross that of the Earth. Therefore, the most suitable targets for the Orion Crew Exploration Vehicle (CEV) are those NEOs in heliocentric orbits similar to Earth's (i.e. low inclination and low eccentricity). One of the significant advantages of this type of mission is that it strengthens and validates the foundational infrastructure of the United States Space Exploration Policy and is highly complementary to NASA's planned lunar sortie and outpost missions circa 2020. A human expedition to a NEO would not only underline the broad utility of the Orion CEV and Ares launch systems, but would also be the first human expedition to an interplanetary body beyond the Earth–Moon system. These deep space operations will present unique challenges not present in lunar missions for the onboard crew, spacecraft systems, and mission control team. Executing several piloted NEO missions will enable NASA to gain crucial deep space operational experience, which will be necessary prerequisites for the eventual human missions to Mars.Our NEO team will present and discuss the following:

• new mission trajectories and concepts;

• operational command and control considerations;

• expected science, operational, resource utilization, and impact mitigation returns; and

• continued exploration momentum and future Mars exploration benefits.

Ares V launch vehicle: An enabling capability for future space science missions

NASA's planned Ares V cargo launch vehicle offers the potential to completely change the paradigm of future space science mission architectures. Future space science telescopes desire increasingly larger telescope collecting aperture. But, current launch vehicle mass and volume constraints are a severe limit. The Ares V greatly relaxes these constraints. For example, while current launch vehicles have the ability to place a 4.5 m diameter payload with a mass of 9400 kg on to a Sun-Earth L2 transfer trajectory, the Ares V is projected to have the ability to place an 8.8 m diameter payload with a mass of approximately 60,000 kg on to the same trajectory, or 180,000 kg into Low Earth Orbit. Also the Ares V could place approximately 3000 kg (13,000 kg with a Centaur upper stage) on to a trajectory with a C3 of 106 km²/s², arriving at Saturn in 6.1 years without the use of gravity assists. This paper summarizes the current planned Ares V payload launch capability.     

载人小行星探测的任务特点与实施途径探讨

介绍了载人小行星探测的发展现状,对目前美国基于"猎户座"飞船的载人小行星探测的概要方案进行了描述,包括探测器系统组成、运载火箭和飞行方案等内容。从速度增量、目标星引力等方面,分析了载人小行星探测的任务特点,并与载人火星探测、载人月球探测以及无人小行星探测的任务特点进行了比较。给出了载人小行星探测的实施途径建议,包括目标星选择、载人飞船系统设计等。讨论了其所涉及的推进、星际飞行安全保障、小行星表面行走等关键技术。研究结果可为我国开展载人深空探测提供参考。     

Informed maintenance for next generation reusable launch systems

Perhaps the most substantial single obstacle to progress of space exploration and utilization of space for human benefit is the safety & reliability and the inherent cost of launching to, and returning from, space. The primary influence in the high costs of current launch systems (the same is true for commercial and military aircraft and most other reusable systems) is the operations, maintenance and infrastructure portion of the program's total life cycle costs. Reusable Launch Vehicle (RLV) maintenance and design have traditionally been two separate engineering disciplines with often conflicting objectives - maximizing ease of maintenance versus optimizing performance, size and cost. Testability analysis, an element of Informed Maintenance (IM), has been an ad hoc, manual effort, in which maintenance engineers attempt to identify an efficient method of troubleshooting for the given product, with little or no control over product design. Therefore, testability deficiencies in the design cannot be rectified. It is now widely recognized that IM must be engineered into the product at the design stage itself, so that an optimal compromise is achieved between system maintainability and performance.The elements of IM include testability analysis, diagnostics/prognostics, automated maintenance scheduling, automated logistics coordination, paperless documentation and data mining. IM derives its heritage from complimentary NASA science, space and aeronautic enterprises such as the on-board autonomous Remote Agent Architecture recently flown on NASA's Deep Space 1 Probe as well as commercial industries that employ quick turnaround operations. Commercial technologies and processes supporting NASA's IM initiatives include condition based maintenance technologies from Boeing's Commercial 777 Aircraft and Lockheed-Martin's F-22 Fighter, automotive computer diagnostics and autonomous controllers that enable 100,000 mile maintenance free operations, and locomotive monitoring system software.This paper will summarize NASA's long-term strategy, development, and implementation plans for Informed Maintenance for next generation RLVs. This will be done through a convergence into a single IM vision the work being performed throughout NASA, industry and academia. Additionally, a current status of IM development throughout NASA programs such as the Space Shuttle, X-33, X-34 and X-37 will be provided and will conclude with an overview of near-term work that is being initiated in FY00 to support NASA's 2^nd Generation Reusable Launch Vehicle Program.     

Chandrayaan-1 mission to the Moon

Chandrayaan-1 is the first Indian planetary exploration mission that will perform remote sensing observation of the Moon to further our understanding about its origin and evolution. Hyper-spectral studies in the 0.4– region using three different imaging spectrometers, coupled with a low energy X-ray spectrometer, a sub-keV atom analyzer, a 3D terrain mapping camera and a laser ranging instrument will provide data on mineralogical and chemical composition and topography of the lunar surface at high spatial resolution. A low energy gamma ray spectrometer and a miniature imaging radar will investigate volatile transport on lunar surface and possible presence of water ice in the polar region. A radiation dose monitor will provide an estimation of energetic particle flux en route to the Moon as well as in lunar orbit. An impact probe carrying a mass spectrometer will also be a part of the spacecraft. The 1 ton class spacecraft will be launched by using a variant of flight proven indigenous Polar Satellite Launch Vehicle (PSLV-XL). The spacecraft will be finally placed in a 100 km circular polar orbit around the Moon with a planned mission life of two years.     

The navigational experiments on microgravitational space platform “FOTON-M2”

This paper presents the review of results of the navigating experiments which have been carried out during flight of microgravitational space platform (MSP) Foton-M2 in May–June 2005. The brief characteristic of the created MIRAGE–M equipment consisting from magnitometric system and satellite radionavigation receiver is given. The measurements have allowed to restore unguided MSP movement and to estimate a level of microaccelerations (microgravitations) onboard during flight, and have provided precision time-position binding of the research experiments. The data from the equipments transmitted on the telemetering channel have allowed testing the information technologies of virtual support of experiments in space. Flight testing of the equipment has allowed make a conclusion on usefulness of accommodation onboard the small-sized auxiliary navigating system focused for work with users of research experiments. The experiments on MSP Foton-M2 are the development of experiments with MIRAGE equipment carried out in 1999 during flight time of MSP Foton-12 [N.D. Semkin, V.V. Ivanov, V.I. Abrushkin, V.L. Balakin, I.V. Belokonov, K.E. Voronov, The experiments with magnetic fields formed by technical equipment inside Foton-12 spacecraft: the results of the MIRAGE experiments, in: Proceedings of International Conference “Scientific and Technological Experiments on Russian Foton/Bion Recoverable Satellites: Results, Problems and Outlooks”, 25–30 June 2000, pp. 116–122; V.L. Balakin, I.V. Belokonov, V.V. Ivanov, “Determination of motion of spacecraft Foton-12 as a result of magnetic fields measurement in MIRAGE experiment”, pp. 231–238 (published in the same place)].Paper is executed within the framework of the grant of the Russian Fund of Fundamental Researches 06-08-00244.     

基于DSP的总线式飞控系统

针对小型无人机控制系统对功耗、成本、可集成性等的较高要求,设计了一种基于DSP芯片TMS320F2812的总线式飞行控制系统。详细阐述了系统的设计思想及其基本硬件构成,包括采用DSP为处理单元的飞控计算机、采用低成本MEMS惯性器件的捷联式姿态航向基准系统(航姿仪)和提高通讯可靠性的双余度总线。飞行试验表明该系统满足小型无人机自主控制任务对于可靠性和精度的要求,同时也是一种轻型、低成本、高集成度的方案。     

我国航天运输系统60年发展回顾

航天运输系统包括一次性运载火箭、重复使用运载器、轨道转移运载器3个领域,目前一次性运载火箭仍是我国满足进入空间需求的主体。我国运载火箭起步于20世纪60年代,经过半个世纪的发展,共研制了17种运载火箭、9种上面级,具备发射低、中、高不同轨道和不同有效载荷的能力。对我国航天运输系统60年发展历程和主要成就与不足进行了总结。     

运载火箭组装与测试远程协同信息平台技术

为适应未来高频度发射任务需求,在借鉴国内外远程协同及信息应用技术基础上,以中国运载火箭组装、测试及发射任务为背景,通过对功能需求和技术难点分析,设计了运载火箭组装与测试远程协同应用系统,对关键技术进行了分析和论述,为运载火箭远程测试、协同决策发射提供有效技术解决途径。     

Project of Ariane 5 LV family advancement by use of reusable fly-back boosters (named “Bargouzine”)

The paper concerns possible concept variants of a partially reusable Heavy-Lift Launch Vehicle derived from the advanced basic launcher (Ariane-2010) by means of substitution of the EAP Solid Rocket Boosters for a Reusable Starting Stage consisting two Liquid-propellant Reusable Fly-Back Boosters called “Bargouzin”.This paper describes the status of the presently studied RFBB concepts during its three phases.The first project phase was dedicated to feasibility expertise of liquid-rocket reusable fly-back boosters (“Baikal” type) utilization for heavy-lift space launch vehicle. The design features and main conclusions are presented.The second phase has been performed with the purpose of selection of preferable concept among the alternative ones for the future Ariane LV modernization by using RFBB instead of EAP Boosters. The main requirements, logic of work, possible configuration and conclusion are presented. Initial aerodynamic, ballistic, thermoloading, dynamic loading, trade-off and comparison analysis have been performed on these concepts.The third phase consists in performing a more detailed expertise of the chosen LV concept. This part summarizes some of the more detailed results related to flight performance, system mass, thermoprotection system, aspects of technologies, ground complex modification, comparison analyses and conclusion.     

捷龙一号首飞（英文）

The Smart Dragon 1(SD-1) launch vehicle is the first commercial rocket developed by China Academy of Launch Vehicle Technology(CALT), targeting to the international launch market for small satellites. As the smallest launch vehicle in China at present, SD-1 is one of the most efficient solid boost rockets nationwide in terms of launch capacity. Compared with current domestic rockets, it provides remarkable access to space with a faster response, higher orbit-injection accuracy and better payload accommodation at a lower cost. On August 17, 2019, SD-1 completed its maiden flight and delivered three satellites into the desired Sun Synchronous Orbit(SSO) of 550 km accurately. In this article, a technical review of SD-1 is presented detailing the design concept and the use of state of the art technology throughout its development.     

返回舱和着陆系统设计的新理念

文章描述了美俄合作提出的一种低成本和低风险的载人返回舱概念。方案采用已有的硬件和技术，由美国负责电子设备和软件，充分利用俄罗斯在返回舱方面的技术和低成本。提出的这种返回舱概念是把联盟-TN按比例增大到可以容纳8位乘员，而且着陆系统增加了气囊，对伤病航天员的着陆具有更好的缓冲作用。     

返回舱和着陆系统设计的新理念

文章描述了美俄合作提出的一种低成本和低风险的载人返回舱概念。方案采用已有的硬件 和技术,由美国负责电子设备和软件,充分利用俄罗斯在返回舱方面的技术和低成本。提出的这种返回舱 概念是把联盟-TM按比例增大到可以容纳8位乘员,而且着陆系统增加了气囊,对伤病航天员的着陆具有 更好的缓冲作用。