共查询到17条相似文献,搜索用时 724 毫秒
1.
角闪烁误差是导引头寻的制导的主要误差来源,基于高分辨力雷达的单脉冲测角算法可有效改善角闪烁现象。现有的研究大多基于幅度加权的思想,利用距离单元的幅度信息进行加权平滑处理。本文在现有高分辨测角算法的基础上,结合高分辨一维距离像的位置信息,提出了一种新的角度信息处理方法。该算法充分利用了距离像有效单元的目标信息,提高了角度测量精度。仿真实验表明该算法对角闪烁有较好的抑制作用。 相似文献
2.
雷达距离高分辨特性,即目标的一维高分辨距离像特性,能够体现目标的形状及结构信息,且易获取,有利于对目标进行准确识别,这已成为目前雷达目标识别领域的一个重要研究方向。开展目标一维高分辨特性研究的一个重要基础是测量,因而通过测量目标的一维高分辨距离像并分析目标特性,对目标识别具有重大理论意义与实际应用价值。基于此,文章利用实验室现有全相参新体制雷达导引头目标测量平台,对海面舰船目标的距离高分辨特性进行了初步实测,获取了海面舰船的米级高分辨距离像,为今后深入开展海面舰船目标识别研究奠定了坚实基础。 相似文献
3.
4.
5.
6.
7.
《载人航天》2019,(1)
针对月面着陆过程中可能存在的着陆器倾斜而导致的结构损坏甚至颠覆等问题,提出了一种用于月面着陆的基于知识辅助的单脉冲前视成像方法。首先结合月面着陆器平台搭载的双通道雷达进行了理想情况下的单脉冲成像分析,然后分析了影响单脉冲成像性能的内在机理,并对雷达接收通道的不一致性进行了建模。在此基础上,将单脉冲成像问题转化为通道相位误差估计问题;结合天线方向图的先验信息,通过对实际天线方向图与理想方向图数据信息的对比,利用最小二乘方法估计出两者之间的相位差异,并求得改进的单脉冲测角曲线。最后对接收到的回波数据进行相位补偿,就可以获得高分辨的月面着陆区域单脉冲成像结果。地球机载实测数据处理结果表明此方法可以获得高分辨的前视成像结果,可应用在月面着陆过程中。 相似文献
8.
针对空舰导弹打击岛礁区水面舰艇目标问题,由岛礁与目标的相对位置关系,将导弹搜索航向划分为 4个区域,界定了降低岛礁影响的区域;从岛目距离、弹载雷达搜索扇面、开机距离、最小间隔角等方面,研究了空舰导弹搜索航向计算方法。通过仿真实验,分析了不同最大间隔角和岛目距离情况下的空舰导弹搜索航向优选方法。 相似文献
9.
一种基于高分辨率距离像自动目标识别新方法 总被引:4,自引:1,他引:4
提出了一种基于高分辨率距离像的联合对准与识别新方法。该方法结合功率变换的使用,在利用8米雷达目标实测数据进行的识别实验中,获得了较高的正确识别率。 相似文献
10.
针对高分辨率雷达距离扩展目标检测问题,提出了一种基于一维距离像波形的距离扩展目标检测器。分析了目标一维距离像的波形特点,对一维距离像的离散序列进行FFT变换,获得变换后的低频分量平均值与高频分量平均值的比值,以其中最大的比值作为检测统计量并进行有无目标的判决。仿真结果表明,此检测方法的检测性能要优于依赖于散射中心空间分布密度的广义似然比(SSD—GLRT,Spatial Scattering Density—Generalized Likelihood Ratio Test)检测器,并且明显优于基于波形熵的检测器。 相似文献
11.
12.
空间目标三维成像可为目标的特征提取、分类与识别提供重要依据。基于L型三天线干涉成像原理,提出了一种宽带雷达条件下空间自旋目标干涉三维成像方法。首先,分析了雷达发射线性调频(LFM)信号条件下,空间自旋目标在距离-慢时间平面上的成像特点,建立了基于距离-慢时间平面的空间自旋目标干涉三维成像模型;其次,针对建立的干涉三维成像模型中,不同散射点的回波在距离-慢时间平面上会相互交叠的问题,对回波曲线分离、交叉点处理以及一维距离旁瓣的影响等进行了讨论,并给出了解决方法,从而获得目标三维图像。与已有方法相比,该方法可有效克服单基雷达三维成像无法获得目标各散射点真实三维位置以及在双/多基雷达三维成像时多部雷达回波联合处理较困难的问题。最后,仿真实验结果验证了所提方法的有效性。 相似文献
13.
《中国航空学报》2020,33(3):1026-1036
A high resolution range profile (HRRP) is a summation vector of the sub-echoes of the target scattering points acquired by a wide-band radar. Generally, HRRPs obtained in a non-cooperative complex electromagnetic environment are contaminated by strong noise. Effective pre-processing of the HRRP data can greatly improve the accuracy of target recognition. In this paper, a denoising and reconstruction method for HRRP is proposed based on a Modified Sparse Auto-Encoder, which is a representative non-linear model. To better reconstruct the HRRP, a sparse constraint is added to the proposed model and the sparse coefficient is calculated based on the intrinsic dimension of HRRP. The denoising of the HRRP is performed by adding random noise to the input HRRP data during the training process and fine-tuning the weight matrix through singular-value decomposition. The results of simulations showed that the proposed method can both reconstruct the signal with fidelity and suppress noise effectively, significantly outperforming other methods, especially in low Signal-to-Noise Ratio conditions. 相似文献
14.
《中国航空学报》2021,34(6):141-150
Hobbing is one of the crucial gear manufacturing processes with high precision and high efficiency. In order to improve the accuracy of hobbing and hob relief grinding, more precise grinding wheels are demanded for relief grinding in the production of gear hobs. In this paper, a new and accurate mathematical method for calculating the axial profile of grinding wheel based on the corresponding gear hob to be ground is proposed. Considering that most researches have been conducted to focus on the optimization of hob geometric feature and only can be applied to a specific type of hand of helix and rake angle of gear hobs. The method in this paper can be served as a general algorithm for generating axial profile of grinding wheels on the basis of the spatial envelope theory, the principle of coordinate system transformation, and studies on normal profile of single-tooth. The accuracy of grinding hobs is based on applying the approach in practical manufacturing. Taking two typical different kinds of pre-grinding gear hobs as examples for calculation and experiment, the results of tooth profile errors strengthen the position that the validity and feasibility of this method, it can be employed for gear hob design and grinding processing. 相似文献
15.
超声压气机叶型设计方法 总被引:4,自引:0,他引:4
在设计超声叶型时,为使得叶栅进口马赫数和气流角等于给定值,提出一种新的叶型参数化方法。该方法以经典唯一进气角计算方法为基础,将超声叶栅的唯一进气角和叶型几何形状关联起来,由进口马赫数和气流角确定吸力面进口段叶型;根据喉部面积、前后缘小圆半径、最大挠度和最大厚度等特征参数确定其他部分叶型。用此参数化方法设计了6个超声叶型,并用Fluent对设计结果进行了验证。结果表明,来流马赫数及进气角的设计值与Fluent求解结果基本一致,进气角最大误差仅为0.7°,进口马赫数最大误差仅为0.01;并且实现了多激波增压和减小激波损失等效果。 相似文献
16.