惯性参数不确定的自由漂浮空间机器人自适应控制研究

针对自由漂浮空间机器人系统惯性参数不确定问题,提出一种笛卡儿空间内的自适应轨迹跟踪控制方法。采用扩展机械臂模型建立了自由漂浮空间机器人关节空间动力学方程,进而推导笛卡儿空间中的自由漂浮空间机器人动力学方程。在基于逆动力学法的自由漂浮空间机器人自适应控制器设计中,利用标称控制器离线固定控制参数与补偿控制器在线补偿方法,既可以保证惯量矩阵可逆,又可以使控制参数实时估计。采用Lyapunov方法的稳定性分析表明系统是稳定且渐进收敛的。最后,应用该控制方法对两杆平面自由漂浮空间机器人进行了仿真研究。仿真结果显示自由漂浮空间机器人末端执行器在笛卡儿空间具有良好的轨迹跟踪能力。     

Parameterization and adaptive control of space robot systems

In space application, robot system are subject to unknown or unmodeled dynamics, for example, in the tasks of transporting an unknown payload or catching an unmodeled moving object. We discuss the parameterization problem in dynamic structure and adaptive control of a space robot system with an attitude-controlled base to which the robot is attached. We first derive the system kinematic and dynamic equations based on Lagrangian dynamics and the linear momentum conservation law. Based on the dynamic model developed, we discuss the problem of linear parameterization in term of dynamic parameters, and find that in joint space, the dynamics can be linearized by a set of combined dynamic parameters; however, in inertial space linear parameterization is impossible in general. Then we propose an adaptive control scheme in joint space, and present a simulation study to demonstrate its effectiveness and computational procedure. Because most takes are specified in inertial space instead of joint space, we discuss the issues associated to adaptive control in inertial space and identify two potential problem: unavailability of joint trajectory because the mapping from inertial space trajectory is dynamic-dependent and subject to uncertainty; and nonlinear parameterization in inertial space. We approach the problem by making use of the proposed joint space adaptive controller and updating the joint trajectory by the estimated dynamic parameters and given trajectory in inertial space     

Attitude tracking control for variable structure near space vehicles based on switched nonlinear systems

An adaptive robust attitude tracking control law based on switched nonlinear systems is presented for a variable structure near space vehicle (VSNSV) in the presence of uncertainties and disturbances. The adaptive fuzzy systems are employed for approximating unknown functions in the flight dynamic model and their parameters are updated online. To improve the flight robust performance, robust controllers with adaptive gains are designed to compensate for the approximation errors and thus they have less design conservation. Moreover, a systematic procedure is developed for the synthesis of adaptive fuzzy dynamic surface control (DSC) approach. According to the common Lyapunov function theory, it is proved that all signals of the closed-loop system are uniformly ultimately bounded by the continuous controller. The simulation results demonstrate the effectiveness and robustness of the proposed control scheme.     

基于改进粒子群优化模糊控制的MPPT算法研究

在光照强度和温度变化时,常规的最大功率点跟踪(MPPT)算法难以快速准确地跟踪光伏系统最大功率点。针对此问题,设计了一种改进粒子群优化算法(PSO)的模糊控制器。首先,依据常规MPPT特性,设计了一种带调整因子的模糊控制算法以快速收敛到最大功率点;然后,采用参数自适应PSO对设计的模糊控制器调整因子进行动态优化。仿真结果表明:所设计的参数自适应PSO优化模糊控制器能快速准确地跟踪最大功率点,保证了MPPT的动态响应速度和稳态精度,提高了光伏系统的工作效率。     

基于自适应模糊系统的空天飞行器非线性预测控制

 针对一类多输入多输出非线性不确定系统,提出了基于自适应模糊系统的非线性预测控制方法。控制器由基于模糊系统的非线性预测控制器和鲁棒自适应控制器两个部分组成。根据系统的跟踪误差在线调整模糊系统的权值,使得模糊系统一致逼近被控对象中的非线性函数,通过泰勒展开设计出基于模糊系统的非线性预测控制律,避免了预测控制在线优化带来的繁重的计算负担。鲁棒自适应控制器则用于减少不确定和模糊逼近误差对系统的影响。所设计的控制器保证了闭环系统的最终一致有界稳定。基于Lyapunov稳定原理,给出了理论证明和分析。最后利用提出的控制方案设计了空天飞行器高超声速飞行姿态的控制系统,仿真结果表明了控制方案的有效性。     

一种非链式非完整球形机器人的反步轨迹跟踪控制器(英文)

Spherical robot has good static and dynamic stability, which provides it with strong viability in hostile environment, but the lack of effective control methods has hindered its application and development. This article deals with the dynamic trajectory tracking problem of the spherical robot BHQ-2 designed for unmanned environment exploration. The dynamic model of the spherical robot is established with a simplified Boltzmann-Hamel equation, based on which a trajectory tracking controller is designed by using the back-stepping method. The convergence of the controller is proved with the Lyapunov stability theory. Numerical simulations show that with the controller the robot can globally and asymptotically track desired trajectories, both linear and circular.     

Adaptive variable structure tracking control for constrained robots

The problem of controller design for constrained robots with the consideration of computational efficiency is addressed. An efficient adaptive variable structure control algorithm based on a reduced dynamics formulation, is presented for trajectory tracking of an end-effector on a constrained surface with specified constraint forces. It is shown that the objective can be achieved without exact knowledge of robot dynamics and on-line calculation of nonlinear dynamic functions. The control algorithm is constructed with at most three control parameters to be adjusted adaptively, and that number is determined independently of the number of degrees of freedom of the robotic manipulators. A numerical example is presented to illustrate the developed method     

轮腿式火星探测机器人的多目标协同控制

火星探测任务要求机器人具有对未知的不规则地形的自适应能力和动态稳定性。针对轮腿式火星探测机器人,提出了基于运动学反解模型、车体姿态和轮壤接触力的多目标协同控制策略。通过车体姿态调整运动学建模、一阶低通滤波及腿部阻抗控制算法和基于腿部运动危险系数的重心高度调整算法,实现了车体姿态的跟踪控制、轮壤恒力接触控制和重心最优高度控制,提升了轮腿机器人在非结构地形中的自适应能力、运动稳定性及腿部运动空间的安全性。在MATLAB和UG中建立联合仿真模型,验证了控制策略的有效性。     

基于逆动力学的柔性连杆机械臂的混合模糊控制

利用假设模态法建立了柔性连杆机械臂的逆动力学方程,提出了一种并行于常规开环逆动力学控制的混合模糊控制方法对其进行末端轨迹跟踪。设计的控制器由两部分组成,一部分为根据结构的逆动力学以及机械臂末端所需跟踪的轨迹计算出控制力;另一部分为通过末端位置的实测与给定轨迹的偏差,利用一个辅助模糊控制对控制量进行调整,构成输出反馈部分。通过数字仿真,并与常规模糊控制结果的比较,表明借助于结构逆动力学,可以降低模糊控制器对知识库的需求,获得较好的控制稳态性能。     

Quantitative speed control for SRM drive using fuzzy adapted inverse model

Quantitative and robust speed control for a switched reluctance motor (SRM) drive is considered to be rather difficult and challenging owing to its highly nonlinear dynamic behavior. A speed control scheme having two-degree-of-freedom (2DOF) structure is developed here to improve the speed dynamic response of an SRM drive. In the proposed control scheme, the feedback controller is quantitatively designed to meet the desired regulation control requirements first. Then a reference model and a command feedforward controller based on an inverse plant model are employed to yield the desired tracking response at nominal case. As the variations of system parameters and operating conditions occur, the prescribed control specifications may not be satisfied any more. To improve this, the inverse model is adaptively tuned by a fuzzy control scheme so that the model-following tracking error is significantly reduced. In addition, a simple disturbance cancellation robust controller is added to improve the tracking and regulation control performances further.     

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.     

VTOL Aircraft Control Output Tracking Sensitivity Design

A method is presented for reducing trajectory sensitivity and achieving robust asymptotic tracking for linear feedback systems when there are parameter perturbations and disturbance inputs. The controller consists of a servocompensator containing the modes of the reference signals and disturbance inputs, a stabilizing feedback loop, and a feedforward compensator. Application of the method to the design of a vertical takeoff and landing (VTOL) aircraft flight control system is discussed. The use of a precompensator allows performance maneuvers such that the aircraft tracks desired trajectories and the feedforward and feedback signals aid in reducing the trajectory sensitivity to variations of parameters due to change in airspeed and to wind gust. Simulation results are presented to show the robust tracking, disturbance rejection, and sensitivity reduction capabilities of the flight control system.     

Robust dynamic output feedback control for switched polytopic systems under asynchronous switching

The robust controller design problem for switched polytopic systems under asynchronous switching is addressed.These systems exist in many aviation applications, such as dynamical systems involving rapid variations.A switched polytopic system is established to describe the highly maneuverable technology vehicle within the full flight envelope and a robust dynamic output feedback control method is designed for the switched polytopic system.Combining the Lyapunov-like function method and the average dwell time method, a sufficient condition is derived for the switched polytopic system with asynchronous switching and data dropout to be globally,uniformly and asymptotically stable in terms of linear matrix inequality.The robust dynamic output feedback controller is then applied to the highly maneuverable technology vehicle to illustrate the effectiveness of the proposed approach.The simulation results show that the angle of attack tracking performance is acceptable over the time history and the control surface responses are all satisfying along the full flight trajectory.     

多无人机绳索悬挂协同搬运固定时间控制

针对多无人机绳索悬挂协同搬运跟踪控制问题,设计了一种新的固定时间协同跟踪控制算法。首先,通过旋量分析,计算系统不同状态下的有效旋量空间,并根据静力学平衡计算系统在有效旋量空间约束下的拉力容许裕度。其次,在保证绳索张紧以及最大拉力约束的条件下,基于微分平坦性以及绳索拉力优化分配算法,规划编队的期望跟踪轨迹。然后,基于Udwadia-Kalaba方程建立系统动力学模型,设计了连续的基于类超扭滑模和积分滑模的鲁棒控制项,以补偿系绳拉力给无人机造成的扰动,并设计了基于双极限齐次性原理的固定时间无人机协同外环位置控制器。针对无人机内环姿态稳定控制,设计了固定时间姿态稳定控制器。仿真结果表明,绳索拉力满足张紧和最大拉力约束,且设计的固定时间协同跟踪控制算法保证了系统在固定时间内稳定跟踪期望轨迹。     

Kinematics-based four-state trajectory tracking control of a spherical mobile robot driven by a 2-DOF pendulum

Spherical mobile robot has compact structure, remarkable stability, and flexible motion,which make it have many advantages over traditional mobile robots when applied in those unmanned environments, such as outer planets. However, spherical mobile robot is a special highly under-actuated nonholonomic system, which cannot be transformed to the classic chained form. At present, there has not been a kinematics-based trajectory tracking controller which could track both the position states and the attitude states of a spherical mobile robot. In this paper, the four-state(two position states and two attitude states) trajectory tracking control of a type of spherical mobile robot driven by a 2-DOF pendulum was studied. A controller based on the shunting model of neurodynamics and the kinematic model was deduced, and its stability was demonstrated with Lyapunov's direct method. The control priorities of the four states were allocated according to the magnification of each state tracking error in order to firstly ensure the correct tracking of the position states. The outputs(motor speeds) of the controller were regulated according to the maximum speeds and the maximum accelerations of the actuation motors in order to solve the speed jump problem caused by initial state errors, and continuous and bounded outputs were obtained. The effectiveness including the anti-interference ability of the proposed trajectory tracking controller was verified through MATLAB simulations.     

一种鲁棒混合自适应控制器

 目前,国内外关于对象具有干扰或未建模动态时的混合自适应控制,仍处于探索阶段。由于连续对象混合控制系统在某些方面优于全连续或全离散系统,因而引起了国内外学者的重视。 本文提出一种新的适用于受扰对象的混合自适应律,并且从理论上证明了由这种控制律所构成的自适应控制器具有鲁棒稳定性。     

冲压发动机连续可调喷管模糊控制研究

为了提高几何可调冲压发动机尾喷管控制性能,针对具有静差与动态不对称特性的连续可调喷管作动系统,采用模糊控制算法进行控制器设计,并利用自适应遗传算法进行控制器参数优化,最后将模糊控制系统与PID控制系统进行性能对比。结果表明,相较于常规模糊控制系统,优化后的模糊控制系统消除了稳态误差,减小了大小喉径在调节时间上的差异,鲁棒性较强。相较于优化后的PID控制系统,优化后的模糊控制系统在保证无稳态误差的基础上,具有更短的调节时间与更小的超调量,跟踪信号时具有更小的误差包络,优化后的模糊比PID控制系统性能提高2.6倍。总之,基于自适应遗传算法优化的连续可调喷管模糊控制系统比PID控制系统性能更高,能够满足高动态几何可调冲压发动机提出的响应快、调节精准、超调小的要求。     

基于多模型切换的鲁棒自适应控制器

系统参数发生跳变时,为了解决多变量系统暂态响应变差的问题,提出一种基于多模型切换的鲁棒自适应控制器。该控制器由多个鲁棒自适应控制器组成,鲁棒自适应控制器保证系统存在未建模动态时能够使自适应系统稳定运行,引入的多模型策略保证系统参数跳变时具有良好的暂态性能。仿真结果表明,所提出的多模型鲁棒自适应控制器能够加快系统的响应速度,提高系统的暂态性能。     

基于LADRC的无人直升机轨迹跟踪

无人直升机轨迹控制系统是对多输入/多输出强耦合非线性系统进行解耦控制的系统。为解决无人直升机轨迹控制效果依赖于直升机物理参数的测量和辨识精度以及外部扰动大小问题,提出了一种基于线性自抗扰控制(LADRC)的多回路无人直升机轨迹控制系统。首先建立无人直升机X-Cell的飞行动力学模型,并引入风切变、大气紊流和突风模型以更加准确模拟真实飞行环境;然后对X-Cell进行配平计算以验证动力学模型和配平算法的准确性,并选取一组配平值作为轨迹控制仿真的初始状态和操纵量;随后根据被控量的动力学方程阶次选取对应的一阶和二阶LADRC基本控制器,并结合时间尺度原理,自内向外依次构建无人直升机的姿态、速度和位置控制回路,将三回路串联从而建立了无人直升机轨迹控制系统;而后进行了稳定性分析,特征根计算结果表明轨迹控制系统镇定了X-Cell开环系统不稳定的动态特性;最后将该控制系统应用于各种扰动下直升机轨迹跟踪仿真,结果表明本文无人直升机轨迹控制系统能很好地实现带爬升率的"8"字形轨迹跟踪,且相比于基于比例积分和微分(PID)控制的轨迹控制系统,该控制系统具有更优的鲁棒性和抗扰性。     

高空台飞行环境模拟腔μ综合控制设计

针对航空发动机在高空台(AGTF)试验中高空飞行环境模拟腔(FESV)控制问题以及建模过程中产生的未建模动态不确定性问题,提出了一种μ综合控制结构方案,同时对于截止频率相差近几百倍的温度回路和压力回路的大差异特性,提出了采用同一加权灵敏度函数的处理方法,获得了模拟腔控制的期望效果;采用D K迭代算法设计了μ综合控制器,为解决因系统矩阵不满秩带来的温度、压力同时控制的问题提供了一种设计方法和思路,不同的飞行轨迹仿真验证结果表明:μ综合控制器对于飞行环境模拟腔温度和压力的控制效果一致性良好,动态误差不大于09%,稳态误差不大于05%,因此设计的μ综合控制系统具有伺服跟踪性能和鲁棒性能。