基于压缩感知的频率和DOA联合估计算法

波达方向（DOA）估计是阵列信号处理的一个重要问题,针对信号的DOA估计问题,本文基于压缩感知理论,提出了一种新的频率和角度联合估计算法。首先利用方向波数的空间稀疏性,建立过完备稀疏字典,然后利用压缩采样阵列结构通过求解最优化问题得到方向波数的高分辨估计,最后利用最优空域滤波实现信号到达角度和频率的配对。相对于传统算法,该算法能够实现多信号DOA的高分辨估计,且经过压缩采样后降低了运算量,仿真验证了该算法的正确性与有效性。     

基于空域稀疏性的宽带DOA估计

利用宽带阵列接收信号的空域稀疏性,将宽带信号的波达方向(DOA)估计转化为一个稀疏信号重构的问题,提出了一种新的宽带信号DOA估计算法。该算法将宽带信号分解为多个子带信号,联合利用多个子带信号的空域稀疏性进行重构。它是对用于稀疏重构的标准的稀疏贝叶斯学习算法的推广,可适用于多冗余字典的信号模型。另外,通过对多快拍的阵列接收信号进行奇异值分解(SVD),提取信号子空间作为算法的输入数据,可以在有效减少运算复杂度的同时,提高对噪声的稳健性。与传统的宽带阵列DOA估计方法相比,该算法能够用于低信噪比、快拍有限和信源相关性较高的场合,同时算法的性能对信源个数的估计值不太敏感。仿真实验表明,该算法相对现有的基于子空间类的方法,具有更好的DOA估计性能。     

一种适用于任意阵列的极化和二维DOA联合估计算法

提出了一种适用于任意阵列的极化和二维DOA联合估计算法。该算法基于信号空时二维结构特征,利用空域采样和时域采样构造时空矩阵,通过DOA矩阵方法进行极化和二维DOA参数估计,不需要二维谱峰搜索,计算量小。仿真实验证明了算法的有效性。     

非圆信号的贝叶斯稀疏重构阵列测向方法

对信号非圆特性的有效利用能显著改善子空间类阵列测向方法的性能,但难以弥补此类方法在低信噪比（SNR）、小样本等信号环境适应能力方面的局限。本文引入贝叶斯稀疏学习（SBL）技术以解决非圆信号的波达方向（DOA）估计问题,在结合信号非圆特性的同时对入射信号的空域稀疏性加以利用,通过将非圆信号阵列输出协方差矩阵和共轭协方差矩阵在预先定义的空域字典集上进行稀疏重构,得到入射信号的空间谱重构结果,并依据其谱峰位置估计各信号的方向。该方法对独立和相关信号都具有较好的适应能力,仿真结果验证了该方法在信号环境适应能力和相关信号测向精度等方面的优势。     

DOA estimation under unknown mutual coupling and multipath

We propose a new method for direction of arrival (DOA) estimation in the presence of multipath propagation and mutual coupling for a frequency hopping (FH) system. With the use of pilot symbols and assuming perfect time-frequency synchronization for a linear array, we take mutual coupling and multipath propagation into account, and derive a maximum likelihood (ML) estimator for both the mutual coupling matrix and DOA estimation. We then formulate an iterative alternating minimization (AM) algorithm for finding the mutual coupling and DOA parameters in an alternate manner. Simulation results illustrating the performance of the algorithm and comparison with the Cramer-Rao bound (CRB) are also presented.     

MIMO雷达DOD和DOA联合估计算法: RTR-ESPRIT

 针对双基地多输入多输出(MIMO)雷达多目标波离角(DOD)和波达角(DOA)的联合估计问题,提出一种接收-发射-接收(RTR)-ESPRIT算法。该算法首先利用一维接收ESPRIT(R-ESPRIT)预估计目标DOA,随后分别利用一维发射ESPRIT(T-ESPRIT)和一维接收ESPRIT得到目标的高精度DOD和DOA估计,在每两次ESPRIT算法之间分别构造正交投影算子对接收信号进行接收波束形成和发射波束形成。与传统ESPRIT算法相比,该算法大大降低了数据协方差矩阵维数和计算复杂度,无需额外的配对算法,且理论证明了该方法还可以用于相干目标和单快拍情况下DOD和DOA的联合估计。仿真结果表明了该算法的正确性及良好的估计性能。     

基于共轭循环平稳特性的二维波达方向估计方法

 提出了一种具有阵列孔径扩展能力的共轭循环平稳二维波达方向（DOA）估计方法。该方法通过引入伪采样,充分利用了阵元输出之间共轭循环互相关函数的时间维信息,扩展了阵列有效孔径,提高了算法DOA估计精度,具有较好的低信噪比适应能力。该方法避免了最优时延选择问题,无需谱峰搜索,且其二维角度参数能够自动配对,具有较低的计算量。计算机仿真结果验证了该方法的有效性。     

聚焦变换在MIMO阵列方位估计中的应用

MIMO阵列是近年来信号处理领域提出的一种新体制阵列技术,可有效避免常规阵列中的相干源问题。为解决多载波造成的方位模糊,提出了一种基于聚焦变换的MIMO阵列目标方位估计方法。该方法将MIMO阵列接收信号分解为多个频率分量的信号,并通过聚焦算法将多个频率信号聚焦到同一信号子空间,然后对聚焦后的信号进行方位估计。仿真结果表明:与直接对MIMO阵列接收信号进行方位估计相比,该方法利用了MIMO阵列的回波不相干性和宽带信号能量,具有更好的分辨能力和更高的方位估计精度。     

线性极化敏感阵列的极化平滑算法及相干源参数估计

 研究了基于极化敏感阵列的相干信号参数估计问题。首先,提出一种利用均匀线性极化敏感阵列的新型极化平滑算法(ULAPSA),其能够处理更多相干信号的参数估计,且具有更小的计算量。然后,基于ULAPSA给出了波达方向（DOA）和极化参数估计的两种方法：第1种方法利用角度搜索得到信号的DOA估计,适应任何多分量的电磁矢量传感器阵列;第2种方法结合传播算子算法,无需奇异值分解和角度搜索,能够同时估计信号的DOA和极化参数。该方法适应完备的电磁矢量传感器、三偶极子或三磁环构成的矢量传感器。最后,通过仿真实验比较和分析了所提算法的性能。     

Decorrelation of broadband signals by Toeplitz-Block-Toeplitzstructuring

We propose F-norm of the cross-correlation part of the array covariance matrix as a measure of correlation between the impinging signals and study the performance of different decorrelation methods in the broadband case using this measure. We first show that dimensionality of the composite signal subspace, defined as the number of significant eigenvectors of the source sample covariance matrix, collapses in the presence of multipath and the spatial smoothing recovers this dimensionality. Using an upper bound on the proposed measure, we then study the decorrelation of the broadband signals with spatial smoothing and the effect of spacing and directions of the sources on the rate of decorrelation with progressive smoothing. Next, we introduce a weighted smoothing method based on Toeplitz-block-Toeplitz (TBT) structuring of the data covariance matrix which decorrelates the signals much faster than the spatial smoothing. Computer simulations are included to demonstrate the performance of the two methods     

DOA estimation and mutual coupling calibration with the SAGE algorithm

In this paper, a novel algorithm is presented for direction of arrival（DOA） estimation and array self-calibration in the presence of unknown mutual coupling. In order to highlight the relationship between the array output and mutual coupling coefficients, we present a novel model of the array output with the unknown mutual coupling coefficients. Based on this model, we use the space alternating generalized expectation-maximization（SAGE） algorithm to jointly estimate the DOA parameters and the mutual coupling coefficients. Unlike many existing counterparts, our method requires neither calibration sources nor initial calibration information. At the same time,our proposed method inherits the characteristics of good convergence and high estimation precision of the SAGE algorithm. By numerical experiments we demonstrate that our proposed method outperforms the existing method for DOA estimation and mutual coupling calibration.     

DOA and polarization estimation via signal reconstruction with linear polarization-sensitive arrays

This paper addresses the problem of direction-of-arrival(DOA) and polarization estimation with polarization sensitive arrays(PSA), which has been a hot topic in the area of array signal processing during the past two or three decades. The sparse Bayesian learning(SBL) technique is introduced to exploit the sparsity of the incident signals in space to solve this problem and a new method is proposed by reconstructing the signals from the array outputs first and then exploiting the reconstructed signals to realize parameter estimation. Only 1-D searching and numerical calculations are contained in the proposed method, which makes the proposed method computationally much efficient. Based on a linear array consisting of identically structured sensors, the proposed method can be used with slight modifications in PSA with different polarization structures. It also performs well in the presence of coherent signals or signals with different degrees of polarization. Simulation results are given to demonstrate the parameter estimation precision of the proposed method.     

未知互耦条件下混合信号波达方向估计

阵列天线互耦对导向矢量的扰动以及信号相干性对数据协方差矩阵造成的秩损,使得基于子空间正交性原理的超分辨波达方向估计(Direction-of-Arrival,DOA)算法性能恶化,甚至失效。针对这一问题,提出一种在相干与非相干信号混合状态下无需阵列互耦补偿的特征矢量平滑DOA估计算法。该算法对部分阵元接收数据的协方差矩阵特征分解,将得到的特征矢量平滑处理后构造等效协方差矩阵,抑制阵列互耦影响的同时完成混合信号DOA估计。在阵列互耦和信号相干性均未知的条件下,正确估计了信号DOA,无需互耦参数估计或补偿。计算机仿真结果验证了算法的有效性。     

运动单阵元被动合成阵列波达方向估计

 提出了一种运动单阵元被动合成阵列波达方向(DOA)估计算法。该算法基于被动合成阵列(PSA)的概念,结合空间谱估计的思想构建了运动单阵元被动合成阵列模型,通过多次不同速度合成阵列过程实现对信号DOA的无模糊估计。通过对单次匀速合成阵列过程进行分析得到,在假设信号频率已知条件下,合成阵列算法能够达到与同孔径实阵列多重信号分类（MUSIC）算法相当的DOA估计性能。仿真验证了被动合成阵列与同孔径实阵列的渐近等效性及算法的有效性。     

相关色噪声下无冗余累积量稀疏表示DOA估计

针对传统均匀线阵中四阶累积量计算复杂度大、对快拍数敏感的问题,提出了一种快速去冗余的高分辨波达方向估计新方法。该方法首先通过构造选择矩阵对四阶累积量矩阵进行第1次降维处理,摒弃传统四阶累积量中大量冗余数据,然后对无冗余累积量矩阵进行矢量化并通过二次降维得到统计性能更优的向量观测模型,最后在相应的过完备基下建立观测模型的稀疏表示进行波达方向(Direction of Arrival,DOA)估计。同时将方法推广到L型阵列2维DOA估计,扩展了其应用范围。与传统的四阶累积量方法相比,该方法大大地减小了计算量,对快拍数要求不高,并且能够有效地抑制相关色噪声。理论分析和仿真实验验证了该方法对1维和2维DOA估计都具有较高的估计精度和分辨率。     

一种基于三维阵列结构二维波达方向估计的新方法

给出了一种在高斯白噪声环境下对多个窄带信号进行二维波达方向估计的新方法.该方法根据给出的天线阵列结构的特点,首先构造四个相关矩阵,进而构造一个大的矩阵,对其进行一次特征值分解,由ESPRIT原理实现了信号波达方向的准确估计.该方法精度较高,不存在错误估计,有一定的实用性.     

Multipath mitigation method based on Gaussian mixture model in RF relative measurement

Radio Frequency (RF) technology represents a high-precision relative navigation solution that has significant potential for application to earth-orbiting satellites. In precision applications, multipath errors dominate the total error because observables, which are used to estimate carrier-phase integer ambiguity, are not always subject to a Gaussian distribution when dual-frequency ambiguity estimation methods are used in the presence of multipath. As it has been shown that ranging observables obey a Gaussian mixture distribution, this study proposes improvements to the accuracy of estimation based on multipath mitigation founded on the Gaussian mixture model. To this end, such a model is created for integer ambiguity resolution in the presence of multipath, using which the theoretical error in dual-frequency ambiguity estimation is derived. Expectation Maximization (EM), which aids dual-frequency ambiguity estimation, is subsequently proposed to reduce the effect of multipath errors. Finally, two experimental scenarios are implemented to test the performance of the proposed method. The results show that EM-aided dual-frequency ambiguity estimation reduces the range error to approximately 20% in comparison with simple dual-frequency ambiguity estimation. Therefore the proposed technique is effective for multipath mitigation in RF relative measurement.     

MIMO雷达中一种降维MUSIC的相干角度估计算法

研究单快拍下双基地多输入多输出（Multiple—InputMultiple-Output,MIMO）雷达中相干信源的离开角（Directionofdeparture,DOD）与到达角（directionofarrival,DOA）联合估计问题。利用单快拍下双基地MIMO雷达的接收信号构造一组Toeplitz矩阵,利用这组ToepIitz矩阵重构一个信号矩阵,提出一种基于降维多重信号分类（ReducedDimensionMultipleSignalClassification,RD-MUSIC）的DOD与DOA联合估计算法。提出的算法能够有效估计相干信源以及非相干信源的角度,实现角度的自动配对,并且角度估计性能远优于FBSS—ESPRIT算法以及ESPRIT-like算法。仿真结果验证了算法的有效性。     

无人机测控通信系统中智能天线技术

针对无人机测控与信息传输系统中地面设备笨重、跟踪速度慢等问题,提出地面天线采用智能天线的方法,利用MUSIC(MUltiple SIgnal Classification,多重信号分类)算法实现对机载终端的DOA(Direction Of Ar-rival,波达方向)估计,并添加去相关操作对抗多径,利用基于LCMV(Linearly Constrained Minimum Variance,线性约束最小方差)准则的波束成形算法完成波束赋形,相较于传统的机械跟踪方式,具有设备质量小、成本低、机动性灵活性强和跟踪速度快等优势.仿真和实际测试结果表明,采用DOA估计和波束成形算法的智能天线能够在保证高增益的同时,实时准确地估计出有用信号和多径信号的来波信号方向,并正确完成波束指向,具有很高的工程应用价值.     

一种联合估计的有源校正高精度测向算法

针对存在系统误差的阵列模型,提出了一种有源标校下的联合估计测向算法。该算法把误差矩阵估计转化为误差系数估计,并采用到达角精确已知的源信号进行标校,在此基础上使用最小二乘法联合估计幅相不一致误差系数和互耦误差系数,最后使用结合误差矩阵的MUSIC算法测量信号的到达角。仿真表明,该算法仅需要3个标校源,其精度相比于无阵列误差情况下降0.05°,具有较好的工程可实现性。