X-ray pulsars observed from tenma

Eleven X-rays pulsars have been observed by TENMA between March 1983 and April 1984. Detailed structures in the energy spectra of these X-ray pulsars were obtained using a set of gas scintillation proportional counters aboard TENMA together with pulse periods and pulse profiles. Most of the X-ray pulsars exhibit iron emission lines with the center energy at 6.4 keV.     

Large light X-ray optics: basic ideas and concepts

One of the main guidelines for future X-ray astronomy projects like, e.g., XEUS (ESA) and Generation-X (NASA) is to utilize grazing-incidence focusing optics with extremely large telescopes (several tens of m² at 1 keV), with a dramatic increase in collecting area of about two order of magnitude compared to the current X-ray telescopes. In order to avoid the problem of the source's confusion limit at low fluxes, the angular resolution required for these optics should be superb (a few arcsec at most). The enormous mirror dimensions together with the high imaging performances give rise to a number of manufacturing problems. It is basically impossible to realize so large mirrors from closed Wolter I shells which benefit from high mechanical stiffness. Instead the mirrors need to be formed as rectangular segments and a series of them will be assembled in a petal. Taking into account the realistic load capabilities of space launchers, to be able to put in orbit so large mirror modules the mass/geometric-area ratio of the optics should be very small. Finally, with a so large optics mass it would be very difficult to provide the electric power for an optics thermal active control, able to maintain the mirrors at the usual temperature of 20 °C. Therefore, very likely, the optics will instead operate in extreme thermal conditions, with the mirror temperature oscillating between −30 and −40 °C, that tends to exclude the epoxy replication approach (the mismatch between the CTE of the substrate and that of the resin would cause prohibitively large deformations of the mirror surface profiles). From these considerations light weight materials with high thermal–mechanical properties such as glass or ceramics become attractive to realize the mirrors of future Xray telescopes. In this paper, we will discuss a segments manufacturing method based on Borofloat^TM glass. A series of finite element analysis concerning different aspects of the production, testing and integration of the optics are also presented as well.     

The Scanning Sky Monitor (SSM) on ASTROSAT

The Scanning Sky Monitor is one of the experiments onboard the ASTROSAT, an Indian multiwavelength astronomy satellite mission. This experiment will detect and monitor X-ray transients in the energy band 2–10 keV. It is similar in design to the ASM on RXTE. It consists of position-sensitive proportional counters with one-dimensional mask. We describe the configuration of the experiment. We also discuss some of the results obtained using a detector which has already been fabricated and tested in our laboratory.     

A large area multitechnique experiment for hard X-ray astronomy

A balloon-borne multitechnique large area experiment consisting of 2 co-aligned detectors (3200 cm² NaI and 1800 cm² multiwire proportional counters), is described, which is capble of producing observations of the hard X-ray sky with very high sensitivity and good spectral resolution over the whole operative range (15–300 keV).     

X-ray observations of black-hole accretion disks

Our current theoretical and observational understandings of the accretion disks around Galactic black-holes are reviewed. Historically, a simple phenomenological accretion disk model has been used to interpret X-ray observations. Although such a phenomenological interpretation is still useful, high quality X-ray data from contemporary instruments allow us to test more realistic accretion disk models. In a simple and ideal case, the standard optically thick accretion disk model is successful to explain observations, such that the inner disk radius is constant at three times the Schwarzschild radius over large luminosity variations. However, when disk luminosity is close to or exceeds the Eddington luminosity, the standard disk model breaks, and we have to consider the “slim disk” solution in which radial energy advection is dominant. Recent observations of Ultra-luminous X-ray sources (ULXs), which may not be explained by the standard disk model, strongly suggest the slim disk solution. We compare theoretical X-ray spectra from the slim disk with observed X-ray spectra of ULXs. We have found that the slim disk model is successful to explain ULX spectra, in terms of the massive stellar black-holes with several tens of solar mass and the super-Eddington mass accretion rates. In order to explain the large luminosities (>10⁴⁰ ergs s⁻¹) of ULXs, “intermediate black-holes” (>100M) are not required. Slim disks around massive stellar black-holes of up to several tens of solar mass would naturally explain the observed properties of ULXs.     

Hard X-ray astronomy from balloons

The region of the electromagnetic spectrum between 15 keV and 300 keV is the first high energy photon band available to the astronomer at balloon altitudes. It also represents the point at which a change in experimental technique is required since grazing incidence X-ray mirrors, and, apart from the use of xenon, gas proportional counters become impracticable Thin, actively shielded sodium iodide detectors form the mainstream X-ray detection units. Directionality is achieved by means of honeycomb and modulation collimators. However as suitable position sensitive planes are developed it is possible to anticipate the increasing usage of the coded aperture mask as the key element for fine angular imaging. Balloon-borne hard X-ray telescopes tend to deploy larger sensitive areas than their satellite cousins, and for this reason, with suitably fast timing of the data, may be used to study the classes of objects which exhibit rapid temporal X-ray intensity variations. Spectral studies are also of great astrophysical importance in this range. Apart from the interest in neutron star line emissions, observations in the soft X-ray region have invariably left doubts as to the true nature of the local production mechanisms for specific objects, this is due to the lack of precise definition of the spectral shape of the emissions, particularly at higher photon energies experimental techniques. The usage of balloons and related astrophysical problems are reviewed.     

Cosmic background radiation from pregalactic objects

X-ray astronomy satellite TENMA observed that the X-ray pulsation of Vela X-1 suddenly disappeared for tens of minutes. This phenomenon may be interpreted in terms of the eclipse by a planet of HD77581, the optical companion of Vela X-1.     

Japanese satellite programs in x-ray astronomy

Future programs of x-ray astronomy in Japan are described. Following the Hakucho satellite, ASTRO-B and ASTRO-C are under preparation. $\text{ASTRO-B}$, to be launched in early 1983, is designed for the study of x-ray spectra and variability of x-ray sources. It is equipped with gas scintillation proportional counters of total area 1000 cm², one dimensional x-ray focusing collectors, transient source monitors and a gamma-ray burst monitor. $\text{ASTRO-C}$ will be launched in 1987 to study the time variability of cosmic x-ray sources with high statistical accuracies. The main emphasis is placed not only on the accurate timing analysis of the galactic sources but on the investigation of the time variability of active galactic nuclei. This satellite will be equipped with large area, low background proportional counters of total area of about 5000 cm², an all sky monitor and a gamma-ray burst detector.     

In-orbit operation and performance of the CubeSat Soft X-ray polarimeter PolarLight

PolarLight is a compact soft X-ray polarimeter onboard a CubeSat, which was launched into a low-Earth orbit on October 29, 2018. In March 2019, PolarLight started full operation, and since then, regular observations with the Crab nebula, Sco X-1, and background regions have been conducted. Here we report the operation, calibration, and performance of PolarLight in the orbit. Based on these, we discuss how one can run a low-cost, shared CubeSat for space astronomy, and how CubeSats can play a role in modern space astronomy for technical demonstration, science observations, and student training.     

FY-2C卫星太阳X射线探测器性能定标

通过具体的实验对FY-2C太阳X射线探测器进行了详细的定标.太阳X射线探测器的传感器采用充Ar气的正比计数器.主要探测能量大于4 KeV的太阳X射线流量.在坪特性、效率、正比性、能道划分、能量分辨率和时间分辨率等6个方面详细介绍了定标的方法及结果.定标结果表明,FY-2C卫星的太阳X射线探测器在各个方面都具有很好的性能.最后对FY-2C的在轨探测数据与GOES卫星进行了比较.GOES卫星的太阳X射线传感器采用电离室.FY-2C的探测结果与GOES的探测结果非常吻合.结果表明,FY-2C太阳X射线探测器可以很好地监测太阳X射线的流量变化,为空间环境监测提供有效的服务.      

Supersoft X-ray sources

More than 100 supersoft X-ray sources (SSS) are reported in 20 external galaxies, the Magellanic Clouds (MCs) and our Galaxy. The effective temperatures of the brighter SSS are 20–100 eV. SSS with luminosities below ≈3 × 10³⁸ erg s⁻¹ are consistent with accreting white dwarfs (WDs) with steady nuclear burning or post-novae. Optical identifications exist for SSS in our Galaxy and the MCs (including orbital period determinations) and for SSS in M31 (with novae and symbiotic stars, SySs). High resolution X-ray spectra of the brightest SSS in our Galaxy and the MCs reveal the existence of spectral features due to high gravity WDs. Timing studies in X-rays (combined with the optical) of the stable nuclear burning phase in steady nuclear burning sources and in post-novae allow to constrain the mass accretion rate onto and the mass of the nuclear burning WD. The nature of a few SSS with luminosities 10³⁹ erg s⁻¹ remains unclear.     

The X-ray evolution of galaxies: implications for future X-ray observatories

The X-ray evolution of the luminosity of normal galaxies is primarily driven by the evolution of their X-ray binary populations. The imprints left by a cosmological evolution of the star formation rate (SFR) will cause the average X-ray luminosity of galaxies to appear higher in the redshift range 1–3. As reported by White and Ghosh [ApJ, 504 (1998) L31] the profile of X-ray luminosity with redshift can both serve as a diagnostic probe of the SFR profile and constrain evolutionary models for X-ray binaries. In order to observe the high redshift (z>3) universe in the X-ray band, it is necessary to avoid confusion from foreground field galaxies. We report on the predictions of these models of the X-ray flux expected from galaxies and the implications for the telescope parameters of future deep universe X-ray observatories.     

Probing broad absorption line quasar outflows: X-ray insights

Energetic outflows appear to occur in conjunction with active mass accretion onto supermassive black holes. These outflows are most readily observed in the 10% of quasars with broad absorption lines, where the observer’s line of sight passes through the wind. Until fairly recently, the paucity of X-ray data from these objects was notable, but now sensitive hard-band missions such as Chandra and XMM-Newton are routinely detecting broad absorption line quasars. The X-ray regime offers qualitatively new information for the understanding of these objects, and these new results must be taken into account in theoretical modeling of quasar winds.     

MIRAX: a Brazilian X-ray astronomy satellite mission

We describe the “Monitor e Imageador de Raios-X” (MIRAX), an X-ray astronomy satellite mission proposed by the high-energy astrophysics group at the National Institute for Space Research (INPE) in Brazil to the Brazilian Space Agency. MIRAX is an international collaboration that includes, besides INPE, the University of California San Diego, the University of Tübingen in Germany, the Massachusetts Institute of Technology and the Space Research Organization Netherlands. The payload of MIRAX will consist of two identical hard X-ray cameras (10–200 keV) and one soft X-ray camera (2–28 keV), both with angular resolution of 5–7^′. The basic objective of MIRAX is to carry out continuous broadband imaging spectroscopy observations of a large source sample (9 months/yr) in the central Galactic plane region. This will allow the detection, localization, possible identification, and spectral/temporal study of the entire history of transient phenomena to be carried out in one single mission. MIRAX will have sensitivities of 5 mCrab/day in the 2–10 keV band (2 times better than the All Sky Monitor on Rossi X-ray Timing Explorer) and 2.6 mCrab/day in the 10–100 keV band (40 times better than the Earth Occultation technique of the Burst and Transient Source Experiment on the Compton Gamma-Ray Observatory). The MIRAX spacecraft will weigh about 200 kg and is expected to be launched in a low-altitude (600 km) circular equatorial orbit around 2007/2008.     

Characteristics and performance of thin LaBr3(Ce) crystal for hard X-ray astronomy

We have developed a new detector using thin lanthanum bromide crystal (32 × 3 mm) for use in X-ray astronomy. The instrument was launched in high altitude balloon flight on two different occasions, December 21, 2007, which reached a ceiling altitude of 4.3 mbs and April 25, 2008 reaching a ceiling altitude 2.8 mbs. The observed background counting rate at the ceiling altitude of 4 mbs was ∼4 × 10⁻³ ct cm⁻² s⁻¹ keV⁻¹ sr⁻¹. This paper describes the details of the experiment, the detector characteristics, and the background behaviour at the ceiling altitude.     

Detection of X-ray fluorescence line feature from the lunar surface

We present the results of an analysis by ASCA (Japanese X-ray astronomy satellite) observation of the lunar surface on July 10th – 11th, 1993. In spite of the fact that the X-ray surface brightness is estimated to be at nearly CXB (Cosmic X-ray Background) level, the X-ray spectrum shows significant deviations in relation to Al-Kα and Si-Kα fluorescence X-rays. According to the intensity ratios of Al/Si (1–2) and Mg/Si(<0.4), the properties of the X-ray spectrum is consistent with an intermediate abundance ratio between highlands and mares (or relatively similar to highland values). However, the X-ray illuminated region on the lunar surface are mainly covered with mare regions and the emission of AlK and SiK fluorescence arises from both day side and night side region of the moon. These facts indicate the existence of X-ray production due to bremsstrahlung, with high energy particles impacting even on the night side.     

Hadamard X-ray Spectro-telescope

The Hadamard X-ray Spectro-telescope consists of a flat Bragg crystal, an Hadamard mask and an imaging proportional counter. We have achieved α??α≈50, which is limited by the position resolution of the detector. This telescope is useful to observe the spectral structure of extended X-ray sources. We introduce a new type of read out method (Grouped Wire Method) for the position sensitive proportional counter in order to get high energy and position resolutions for the Hadamard Spectro-telescope. In principle, this method is capable of obtaining the desired linearity over the whole area of the detector.     

Periodic components in Cyg X-3

Hard X-ray observations of Cyg X-3 in the energy range 20–100 keV were made with a Balloon-borne telescope using two large area proportional counters. The source was seen with a total significance of 20.

A 121 s periodicity was seen during Fourier analysis of the data. The phenomenon can be interpreted as due to transient pulsation since no other peak was seen in our data. Quasi-periodic oscillation in the range 0.06–20 mHz have been observed from Cyg X-3 at lower energies. Interestingly, most of the reported periods are multiple of the present measurements. The observed pulsation at high energies indicate the occasional unstable behaviour of the inner parts of the accretion disk connected with the basic rotation period of the compact object.

The 4.8^h modulation, characteristic of the orbital period of the binary system was seen in the data, with a broad maximum between the phase 0.3 to 0.7.     

Long duration balloon flights: A probe for deep hard X-ray astronomy investigation

In this note the state of the art of our knowledge of the high energy sky will be reviewed, with particular regard to the hard X-ray range.The use of more complex and sophisticated payloads that is necessary to obtain up-to-date results mandatory to achieve a better understanding of the actual scenario in the range 15–300 keV, causes new continuous requirements for long duration balloon flights.The needs for astronomy oriented scientific ballooning will be considered and discussed.     

Solar X-ray Monitor (XSM) on-board Chandrayaan-2 orbiter

The remote X-ray fluorescence spectroscopy is a powerful technique to investigate the elemental abundances in the atmosphere-less planetary bodies. The experiment involves measuring spectra of fluorescent X-rays from lunar surface using a low energy X-ray detector onboard an orbiting satellite. Since the flux of fluorescent X-ray lines critically depend on the flux and spectrum of the incident solar X-rays, it is essential to have simultaneous and accurate measurement of X-ray from both Moon and Sun. In the context of Moon, this technique has been employed since early days of space exploration to determine elemental composition of lunar surface. However, so far it has not been possible to exploit it to its full potential due to various reasons. Therefore it is planned to continue the remote X-ray fluorescence spectroscopy experiment on-board Chandrayaan-2 which includes both lunar X-ray observations and solar X-ray observations as two separate payloads. The lunar X-ray observations will be carried out by Chandra Large Area Soft x-ray Spectrometer (CLASS) experiment; whereas the solar X-ray observations will be carried out by a separate payload, Solar X-ray Monitor (XSM). Here we present the overall design of the XSM instrument, the present development status as well as preliminary results of the laboratory model testing. XSM instrument will have two packages namely – XSM sensor package and XSM electronics package. XSM will accurately measure spectrum of Solar X-rays in the energy range of 1–15 keV with energy resolution ∼200 eV @ 5.9 keV. This will be achieved by using state-of-the-art Silicon Drift Detector (SDD), which has a unique capability of maintaining high energy resolution at very high incident count rate expected from Solar X-rays. XSM onboard Chandrayaan-2 will be the first experiment to use such detector for Solar X-ray monitoring.