Scientific Planning and Commanding of the Rosetta Payload

ESA’s Rosetta mission was launched in March 2004 and is on its way to comet 67P/Churyumov-Gerasimenko, where it is scheduled to arrive in summer 2014. It comprises a payload of 12 scientific instruments and a Lander. All instruments are provided by Principal Investigators, which are responsible for their operations. As for most ESA science missions, the ground segment of the mission consists of a Mission Operations Centre (MOC) and a Science Operations Centre (SOC). While the MOC is responsible for all spacecraft-related aspects and the final uplink of all command timelines to the spacecraft, the scientific operations of the instruments and the collection of the data and ingestion into the Planetary Science Archive are coordinated by the SOC. This paper focuses on the tasks of the SOC and in particular on the methodology and constraints to convert the scientific goals of the Rosetta mission to operational timelines.     

CLUSTER MISSION OPERATIONS

The Cluster ground segment design and mission operations concept have been defined according to the basic mission requirements, namely, to allow the transfer of the four spacecraft from the initial geostationary transfer orbit achieved at separation from the launcher into the final highly elliptical polar orbits, such that in the areas of scientific interest along their orbits, the four spacecraft will form a tetrahedral configuration with pre-defined separation distances, to be changed every six months during the mission. The Cluster mission operations will be carried out by ESA from its European Space Operations Centre; the task of merging the Principal Investigators' requests into coordinated, regular scientific mission planning inputs to ESOC will be undertaken by the Joint Science Operations Centre. The mission products will be distributed to the scientific community regularly in form of CD-ROMs. Principal Investigators will also have access to quick-look science, housekeeping telemetry and auxiliary data via an electronic network.     

THE CLUSTER DATA PROCESSING SYSTEM: A DISTRIBUTED SYSTEM IN SUPPORT OF A CHALLENGING SCIENTIFIC MISSION

The Cluster mission is aimed at the study of small-scale structures that are believed to be fundamental in determining the behaviour of key interactive processes of cosmic plasma. The mission will be controlled from the European Space Operations Centre (ESOC). ESOC is also in charge of the commanding of the scientific payloads on-board the four Cluster spacecraft after negotiation with the Cluster Principal Investigators (PIs) and of collecting and distributing the mission's scientific results to the Cluster community. This paper describes the process of translating the scientific requirements of the Cluster mission into a data-processing system supporting the mission via the definition of an appropriate operational scenario. In particular, the process of negotiation between the PIs and ESOC to command the spacecraft is mediated by the Joint Science Operations Centre (JSOC) and finalised by the Cluster Mission Planning System (CMPS) while the return of the data to the Cluster community is actuated by the Cluster Data Disposition System (CDDS). The Cluster Mission Control System (CMCS) provides the interface between these two systems and the spacecraft. These elements constitute the Cluster Data-Processing System (CDPS).     

NOAA -14 September 28, 2006 (DOY 271) tumble anomaly

This describes a NOAA-14 spacecraft loss of control event and the lessons learned. The lessons learned are in two categories: contingency recovery operations; and on-orbit propulsion system isolation methods. The work is motivated in recognition of the effort of the NOAA off-line engineering support team and their NOAA civil servant mission leads and operations support staff.     

Mission segment division of the whole aeroengine loading spectrum based on flight actions

This paper studies on a division method of the whole aeroengine loading spectrum flight mission segment and rotor speed mission segment, which is based on the actual flight actions and related to the flight operations of aeroengine and is suitable for the variable-speed aeroengines such as turbojet and turbofan. Through the research, the aeroengine loading spectrum operation-related mission segments can be divided, which can provide important data basis for the life research on the structures wh...     

Dust Environment Modelling of Comet 67P/Churyumov-Gerasimenko

Dust is an important constituent of cometary emission; its analysis is one of the major objectives of ESA’s Rosetta mission to comet 67P/Churyumov-Gerasimenko (C–G). Several instruments aboard Rosetta are dedicated to studying various aspects of dust in the cometary coma, all of which require a certain level of exposure to dust to achieve their goals. At the same time, impacts of dust particles can constitute a hazard to the spacecraft. To conciliate the demands of dust collection instruments and spacecraft safety, it is desirable to assess the dust environment in the coma even before the arrival of Rosetta. We describe the present status of modelling the dust coma of 67P/C–G and predict the speed and flux of dust in the coma, the dust fluence on a spacecraft along sample trajectories, and the radiation environment in the coma. The model will need to be refined when more details of the coma are revealed by observations. An overview of astronomical observations of 67P/C–G is given, because model parameters are derived from this data if possible. For quantities not yet measured for 67P/C–G, we use values obtained for other comets, e.g. concerning the optical and compositional properties of the dust grains. One of the most important and most controversial parameters is the dust mass distribution. We summarise the mass distribution functions derived from the in-situ measurements at comet 1P/Halley in 1986. For 67P/C–G, constraining the mass distribution is currently only possible by the analysis of astronomical images. We find that both the dust mass distribution and the time dependence of the dust production rate of 67P/C–G are those of a fairly typical comet.     

Deep Impact: The Anticipated Flight Data

A comprehensive observational sequence using the Deep Impact (DI) spacecraft instruments (consisting of cameras with two different focal lengths and an infrared spectrometer) will yield data that will permit characterization of the nucleus and coma of comet Tempel 1, both before and after impact by the DI Impactor. Within the constraints of the mission system, the planned data return has been optimized. A subset of the most valuable data is planned for return in near-real time to ensure that the DI mission success criteria will be met even if the spacecraft should not survive the comet’s closest approach. The remaining prime science data will be played back during the first day after the closest approach. The flight data set will include approach observations spanning the 60 days prior to encounter, pre-impact data to characterize the comet at high resolution just prior to impact, photos from the Impactor as it plunges toward the nucleus surface (including resolutions exceeding 1 m), sub-second time sampling of the impact event itself from the Flyby spacecraft, monitoring of the crater formation process and ejecta outflow for over 10 min after impact, observations of the interior of the fully formed crater at spatial resolutions down to a few meters, and high-phase lookback observations of the nucleus and coma for 60 h after closest approach. An inflight calibration data set to accurately characterize the instruments’ performance is also planned. A ground data processing pipeline is under development at Cornell University that will efficiently convert the raw flight data files into calibrated images and spectral maps as well as produce validated archival data sets for delivery to NASA’s Planetary Data System within 6 months after the Earth receipt for use by researchers world-wide.     

Virtis: An Imaging Spectrometer for the Rosetta Mission

The VIRTIS (Visual IR Thermal Imaging Spectrometer) experiment has been one of the most successful experiments built in Europe for Planetary Exploration. VIRTIS, developed in cooperation among Italy, France and Germany, has been already selected as a key experiment for 3 planetary missions: the ESA-Rosetta and Venus Express and NASA-Dawn. VIRTIS on board Rosetta and Venus Express are already producing high quality data: as far as Rosetta is concerned, the Earth-Moon system has been successfully observed during the Earth Swing-By manouver (March 2005) and furthermore, VIRTIS will collect data when Rosetta flies by Mars in February 2007 at a distance of about 200 kilometres from the planet. Data from the Rosetta mission will result in a comparison – using the same combination of sophisticated experiments – of targets that are poorly differentiated and are representative of the composition of different environment of the primordial solar system. Comets and asteroids, in fact, are in close relationship with the planetesimals, which formed from the solar nebula 4.6 billion years ago. The Rosetta mission payload is designed to obtain this information combining in situ analysis of comet material, obtained by the small lander Philae, and by a long lasting and detailed remote sensing of the comet, obtained by instrument on board the orbiting Spacecraft. The combination of remote sensing and in situ measurements will increase the scientific return of the mission. In fact, the “in situ” measurements will provide “ground-truth” for the remote sensing information, and, in turn, the locally collected data will be interpreted in the appropriate context provided by the remote sensing investigation. VIRTIS is part of the scientific payload of the Rosetta Orbiter and will detect and characterise the evolution of specific signatures – such as the typical spectral bands of minerals and molecules – arising from surface components and from materials dispersed in the coma. The identification of spectral features is a primary goal of the Rosetta mission as it will allow identification of the nature of the main constituent of the comets. Moreover, the surface thermal evolution during comet approach to sun will be also studied.     

Sesame – An Experiment of the Rosetta Lander Philae: Objectives and General Design

SESAME is an instrument complex built in international co-operation and carried by the Rosetta lander Philae intended to land on comet 67P/Churyumov-Gerasimenko in 2014. The main goals of this instrument suite are to measure mechanical and electrical properties of the cometary surface and the shallow subsurface as well as of the particles emitted from the cometary surface. Most of the sensors are mounted within the six soles of the landing gear feet in order to provide good contact with or proximity to the cometary surface. The measuring principles, instrument designs, technical layout, operational concepts and the results from the first in-flight measurements are described. We conclude with comments on the consequences of the last minute change of the target comet and how to improve and to preserve the knowledge during the long-duration Rosetta mission.     

The Plasma Environment of Comet 67P/Churyumov-Gerasimenko Throughout the Rosetta Main Mission

The plasma environment of comet 67P/Churyumov-Gerasimenko, the Rosetta mission target comet, is explored over a range of heliocentric distances throughout the mission: 3.25 AU (Rosetta instruments on), 2.7 AU (Lander down), 2.0 AU, and 1.3 AU (perihelion). Because of the large range of gas production rates, we have used both a fluid-based magnetohydrodynamic (MHD) model as well as a semi-kinetic hybrid particle model to study the plasma distribution. We describe the variation in plasma environs over the mission as well as the differences between the two modeling approaches under different conditions. In addition, we present results from a field aligned, two-stream transport electron model of the suprathermal electron flux when the comet is near perihelion.     

航天任务控制中心容灾模式研究

航天任务是一项高投入、高风险的活动,作为管理所有在轨飞行航天器及资源的航天任务控制中心,要求具备很高的可靠性与较强的容灾能力。国际航天大国对地面系统,特别是任务中心级的备份均非常重视,也开展了相关建设和系统运行。在对我国航天任务控制中心容灾模式进行探讨的基础上,提出容灾中心的技术要素、需求分析以及运行机制。     

Rosetta Radio Science Investigations (RSI)

The Rosetta spacecraft has been successfully launched on 2nd March 2004 to its new target comet 67 P/Churyumov-Gerasimenko. The science objectives of the Rosetta Radio Science Investigations (RSI) experiment address fundamental aspects of cometary physics such as the mass and bulk density of the nucleus, its gravity field, its interplanetary orbit perturbed by nongravitational forces, its size and shape, its internal structure, the composition and roughness of the nucleus surface, the abundance of large dust grains, the plasma content in the coma and the combined dust and gas mass flux. The masses of two asteroids, Steins and Lutetia, shall be determined during flybys in 2008 and 2010, respectively. Secondary objectives are the radio sounding of the solar corona during the superior conjunctions of the spacecraft with the Sun during the cruise phase. The radio carrier links of the spacecraft Telemetry, Tracking and Command (TT&C) subsystem between the orbiter and the Earth will be used for these investigations. An Ultrastable oscillator (USO) connected to both transponders of the radio subsystem serves as a stable frequency reference source for both radio downlinks at X-band (8.4 GHz) and S-band (2.3 GHz) in the one-way mode. The simultaneous and coherent dual-frequency downlinks via the High Gain Antenna (HGA) permit separation of contributions from the classical Doppler shift and the dispersive media effects caused by the motion of the spacecraft with respect to the Earth and the propagation of the signals through the dispersive media, respectively. The investigation relies on the observation of the phase, amplitude, polarization and propagation times of radio signals transmitted from the spacecraft and received with ground station antennas on Earth. The radio signals are affected by the medium through which the signals propagate (atmospheres, ionospheres, interplanetary medium, solar corona), by the gravitational influence of the planet on the spacecraft and finally by the performance of the various systems involved both on the spacecraft and on ground.     

The Deep Impact Earth-Based Campaign

Prior to the selection of the comet 9P/Tempel 1 as the Deep Impact mission target, the comet was not well observed. From 1999 through the present there has been an intensive world-wide observing campaign designed to obtain mission critical information about the target nucleus, including the nucleus size, albedo, rotation rate, rotation state, phase function, and the development of the dust and gas coma. The specific observing schemes used to obtain this information and the resources needed are presented here. The Deep Impact mission is unique in that part of the mission observations will rely on an Earth-based (ground and orbital) suite of complementary observations of the comet just prior to impact and in the weeks following. While the impact should result in new cometary activity, the actual physical outcome is uncertain, and the Earth-based observations must allow for a wide range of post-impact phenomena. A world-wide coordinated effort for these observations is described.     

Loss of the Surface Layers of Comet Nuclei

The Deep Impact observations of low thermal inertia for comet 9P/Tempel 1 are of profound importance for the observations to be made by the Rosetta spacecraft at comet 67P/Churyumov-Gerasimenko. While sub-surface sublimation is necessary to explain the observations, the depth at which this occurs is no more than 2–3 cm and possibly less. The low thermal conductivity when combined with local surface roughness (also observed with Deep Impact) implies that local variations in outgassing rates can be substantial. These variations are likely to be on scales smaller than the resolution limits of all experiments on the Rosetta orbiter. The observed physico-chemical inhomogeneity further suggests that the Rosetta lander will only provide a local snapshot of conditions in the nucleus layer.     

人工智能在航天飞行任务规划中的应用研究

 在航天飞行任务中，如何设计航天器的飞行过程，如何确定地面对航天器的控制操作，如何制定飞行控制计划等，是地面飞行控制中心面临的重大问题，也是航天飞行任务规划所要解决的基本问题。在充分认识和把握人工智能基本原理、方法和技术的基础上，提出了一个基于规则演绎和状态演化的生长式推理模型，并对模型的特性进行了详细讨论，然后导出了该模型在航天飞行任务规划问题中的具体形式，从而成功地解决了航天任务自动规划的难题。通过在实际航天任务中的应用和验证，不仅证明该模型和方法是正确的、可行的和高效的，而且证明人工智能在航天飞行任务规划中有着广阔的应用前景。     

THEMIS Operations

THEMIS—a five-spacecraft constellation to study magnetospheric events leading to auroral outbursts—launched on February 17, 2007. All aspects of operations are conducted at the Mission Operations Center at the University of California at Berkeley. Activities of the multi-mission operations team include mission and science operations, flight dynamics and ground station operations. Communications with the constellation are primarily established via the Berkeley Ground Station, while NASA’s Ground Network provides secondary pass coverage. In addition, NASA’s Space Network supports maneuver operations near perigee. Following a successful launch campaign, the operations team performed on-orbit probe bus and instrument check-out and commissioning tasks, and placed the constellation initially into a coast phase orbit configuration to control orbit dispersion and conduct initial science operations during the summer of 2007. Mission orbit placement was completed in the fall of 2007, in time for the first winter observing season in the Earth’s magnetospheric tail. Over the course of the first 18 months of on-orbit constellation operations, procedures for instrument configuration, science data acquisition and navigation were refined, and software systems were enhanced. Overall, the implemented ground systems at the Mission Operations Center proved to be very successful and completely adequate to support reliable and efficient constellation operations. A high degree of systems automation is employed to support lights-out operations during off-hours.     

航天器控制高级语言的设计与实现

针对航天测控任务中存在的卫星控制人员手工操作多、任务准备周期长、自动化水平低等问题,在分析航天器控制流程的基础上,抽象出面向卫星控制人员的航天器控制高级语言,设计语言规范,描述Windows平台的编辑、编译、运行功能的设计与实现。该语言成功应用于某中心的卫星测控任务中,任务准备快速高效,大大减轻了卫星控制人员的工作量,任务过程自动执行,无需人工干预,提高了航天器控制过程的自动化水平。     

Dawn Science Planning, Operations and Archiving

The Dawn science operations team has designed the Vesta mission within the constraints of a low-cost Discovery mission, and will apply the same methodology to the Ceres mission. The design employs proactive mapping mission strategies and tactics such as functional redundancy, adaptability to trajectory uncertainties, and easy sequence updates to deliver reliable and robust sequences. Planning tools include the Science Opportunity Analyzer and other multi-mission tools, and the Science time-ordered listings. Science operations are conducted jointly by the Science Operations Support Team at the Jet Propulsion Laboratory (JPL) and the Dawn Science Center at the University of California, Los Angeles (UCLA). The UCLA Dawn Science Center has primary responsibility for data archiving while the JPL team has primary responsibility for spacecraft and instrument operations. Constraints and uncertainties in the planning and sequencing environment are described, and then details of the science plan are presented for each mission sub-phase. The plans indicate that Dawn has a high probability of meeting its science objectives and requirements within the imposed constraints.     

CCSDS空间包在MOIMS领域中的应用

为了适应未来航天任务的发展,构建以服务为导向的、开放的、可重用的航天器任务操作系统,分析了CCSDS(Consultative Committee for Space Data Systems,空间数据系统咨询委员会)中MOIMS (Mission Operations and Information Management System,任务操作及信息管理系统)领域的任务操作服务框架的原理、层次结构及优点,对任务操作相关的通用服务、功能服务、COM(Common Object Model,通用对象模型)及MAL(Message Abstraction Layer,消息抽象层)对服务的抽象化描述方法进行了研究.MAL向任务操作相关的服务提供了通用的服务模型框架,所有服务均可用MAL消息格式进行规范化的描述,在此基础上建立了MAL消息格式与CCSDS空间包的映射关系,从而以CCSDS空间包为信息栽体实现了航天器与地面系统间的任务操作通信,可以作为以服务为导向的任务操作系统实际工程应用的参考.