共查询到19条相似文献,搜索用时 396 毫秒
1.
文章提出了一种舱外航天服冷热电一体化(Combined Cooling-Heating-Power,CCHP)系统,该系统的主要组件有质子交换膜燃料电池、热驱制冷装置、金属氢化物储氢装置和辐射器等.在冷热电一体化系统的冷电匹配方法上提出了“以电定冷”方案,按照该方案计算了一组典型工况下系统的工作状态,分析了燃料电池的工作温度、工作电流密度和工作压力对系统质量和消耗性工质损失的影响.结果表明,该舱外航天服冷热电一体化系统在质量大小方面可以接受,在消耗性工质损失方面比水升华器冷源/蓄电池电源方案小得多;且降低燃料电池工作温度和压力、增大燃料电池工作电流密度,均能够减小系统质量、降低系统消耗性工质损失. 相似文献
2.
引言
NASA航天飞机舱外航天服(EMU)是一个独立的系统,它在出舱活动期间为航天员提供环境保护、机动性、生命保障和通信。EMU为一个综合体,由舱外航天服组件(SSA)和生命保障系统(LSS)共同组成。它所提供的消耗品最多可满足7h出舱活动的要求。SSA是EMU中的加压服。LLS主要由背包系统组成,它包括基本生命保障系统(PLSS)和一个备用氧气包(SOP)。 相似文献
3.
4.
5.
6.
7.
8.
出舱行走,航天员的安全是第一位的,如何保证航天员顺利上天,安全出舱,成功返回是任务成功的关键,同时应急救生、应急返回和备份返回也是飞行任务中必须考虑的的工作,应急救援系统当仁不让地担任了神舟七号守护神的任务。 相似文献
9.
抗多径效应的全范围多员出舱通信方法 总被引:1,自引:0,他引:1
针对载人航天器规模大和出舱活动范围广的现状,提出一种抗多径效应的全范围多员出舱通信方法,以解决传统出舱通信方法测控覆盖率低、多径效应影响严重的问题。通过在载人航天器外侧等间隔布置多副天线,实现相对于载人航天器360°范围内的出舱活动测控全覆盖。通信体制采用前向与返向频分双工体制(FDD),各出舱航天员之间采用直扩码分多址(DS-CDMA),对各出舱航天员设计不同的扩频码,解决多人出舱带来的通信互扰问题。为解决由于载人航天器遮蔽、反射带来的多径效应问题,前向链路和返向链路分别采用时间分集技术和空间分集技术的通信方式。仿真结果表明:同样满足10~(-5)误比特率的指标,全范围多员出舱通信方法比传统的单天线和三天线出舱通信方法的信噪比优化1.1~4.5dB,并且能实现全范围出舱活动的测控覆盖和通信连续。 相似文献
10.
11.
One of the biggest challenges of the exploration of the Moon is the survival of the crew and the lunar assets during the lunar night. The environmental conditions on the lunar surface and its cycle, with long periods of darkness, make any long mission in need of specific amounts of heat and electricity to be successful. We have analyzed two different systems to produce heat and electricity on the Moon's surface. The first system consists of Thermal Wadis, sources of thermal power that can be used to supply heat to protect the exploration systems from the extreme cold during periods of darkness. Previous results showed that Wadis can supply enough heat to keep lunar devices such as rovers above their minimum operating temperature (approximately 243 K). The second system studied here is the Thermal Energy Storage (TES), which is able to run a heat engine during the lunar night to produce electricity. When the Sun is shining on the Moon's surface, the system can run the engine directly using the solar power and simultaneously heat a thermal mass. This thermal mass is used as a high temperature source to run the heat engine during the night. We present analytical and numerical calculations for the determination of an appropriate thermal mass for the TES system. 相似文献
12.
13.
高温风洞收集口喷水降温数值仿真研究 总被引:1,自引:0,他引:1
针对高温风洞中扩压器前段壁面防热问题,提出对高温气流外缘喷水降温的方法。通过在收集器入口与喷管出口间安装喷水环,利用液态水汽化吸热对高温气流进行降温,使扩压器壁面形成低温保护层。为了解该方法降温效果,本文利用DPM、组分输运等模型的耦合建立了超声速两相流CFD模型,对向超声速热气流喷水进行降温的过程进行了数值计算,计算结果表明,扩压器启动后有显著的降温保护效果。同时,为探索风洞排气背压和喷水量对风洞流场和壁面降温效果的影响,通过计算得出了变排气背压、变喷水量与降温效果之间的关系,为高温风洞收集口喷水降温装置的优化设计提供了参考。 相似文献
14.
针对火箭发动机尾焰注水流场,组织并实施了火箭发动机系留点火及燃气流场注水降温缩比试验,研究了燃气冲击射流流场和注水作用下两相流场的分布状态以及降温效果。并通过研究在高温高速对流冲击作用下气液两相流的传热和传质理论,在Mixture多相流模型的基础上添加质量和能量源项,建立了多组分气液两相流非定常数值计算模型,通过对比试验结论,结果表明:所建立的数值计算模型具有较高的计算精度和可靠性,能够准确地反映物理现象。利用数值计算模型研究了注水后燃气、液态水和水蒸气三种主要组分在流场中的组成,通过与自由射流对比得到了注水燃气流场的包络线长度与宽度变化,注水对燃气流场降温效果显著。 相似文献
15.
Extra-vehicular activity (EVA) has a significant role during extended space flights. It demonstrates that humans can survive and perform useful work outside the Orbital Space Stations (OSS) while wearing protective space suits (SS). When the International Space Station 'Alpha' (ISSA) is fully operational, EVA assembly, installation, maintenance and repair operations will become an everyday repetitive work activity in space. It needs new ergonomic evaluation of the work/rest schedule for an increasing of the labor amount per EVA hour. The metabolism assessment is a helpful method to control the productivity of the EVA astronaut and to optimize the work/rest regime. Three following methods were used in Russia to estimate real-time metabolic rates during EVA: 1. Oxygen consumption, computed from the pressure drop in a high pressure bottle per unit time (with actual thermodynamic oxygen properties under high pressure and oxygen leakage taken into account). 2. Carbon dioxide production, computed from CO2 concentration at the contaminant control cartridge and gas flow rate in the life support subsystem closed loop (nominal mode) or gas leakage in the SS open loop (emergency mode). 3. Heat removal, computed from the difference between the temperatures of coolant water or gas and its flow rate in a unit of time (with assumed humidity and wet oxygen state taken into account). Comparison of heat removal values with metabolic rates enables us to determine the thermal balance during an operative medical control of EVA at "Salyut-6", "Salyut-7" and "Mir" OSS. Complex analysis of metabolism, body temperature and heat rate supports a differential diagnosis between emotional and thermal components of stress during EVA. It gives a prognosis of human homeostasis during EVA. Available information has been acquired into an EVA data base which is an effective tool for ergonomical optimization. 相似文献
16.
对电磁驱动液态金属热控系统进行了分析,与水工质回路的传热特性比较表明:在进行高功率密度器件散热方面,液态金属换热性能明显优于水等常规工质,在较小的流速下,可以保持较低的器件表面温度;更为重要的是,它可以采用无运动部件电磁泵驱动,具有可靠性高、振动噪声小、结构简单紧凑、功耗小、可控性强等优点。该系统不仅可解决空间高热流密度器件散热难题,而且在微小卫星、月球/行星表面探测器等主动热控制方面也有重要的应用前景。 相似文献
17.
18.
针对航天器潜在的各种类型热泵系统进行定性分析研究。综合分析表明,Rankine热泵系统综合性能最佳,效率高(理论上仅次于Stirling热泵系统),传热系数大,比重量小,地面上有长期运行的经验,其缺点是含有运动部件;Stirling热泵理论热效率虽高,但其传热系数小,比重量大,运动部件多;喷射式热泵和吸附式热泵系统最显著的优点是无运动部件,可靠性高,易于集成封装,而且还可以回收利用高温废热,不消耗系统电能,缺点是性能系数低,比重量大,设备十分庞大;对于其他类型热泵系统,其问题更多。 相似文献
19.
航天器多功能结构传热特性的实验研究 总被引:1,自引:0,他引:1
针对航天器结构高性能、轻质化和集成化的发展要求,设计了集电路控制,热管理功能和结构承载功能于一体的多功能结构。此种结构分别采用柔性电路板控制热仿真多芯片模块,作为多功能结构的热源;碳碳材料作为热倍增器;复合材料蒙皮和金属泡沫芯子的夹层结构作为承载结构,实现了结构和功能的集成。同时,为了研究多功能结构的传热特性,进行了热真空实验,实验测量了热流密度和温度梯度。结果表明这种新型的结构可以消散飞行器多芯片模块产生的热量,碳碳热倍增提供了一种减小温度梯度的新方法,同时这种多功能结构减少了结构的体积,降低了结构的质量。 相似文献