A sample collector for robotic sample return missions I: Temperature effect on collected mass

Sample return is playing an increasingly important role in solar system exploration. Among the possible mission on the horizon, are sample return from asteroids, comets, the Moon and Mars. A collector initially intended for near-Earth asteroids is the touch-and-go-impregnable-pad (TGIP). Here we explore the effect of temperature on its collection capabilities. Temperatures expected on near-Earth asteroid mission targets range from −43 to 36 °C. Experiments were conducted at −75, −50, −25, 23, 65, and 105 °C. It was found that the mass of sample collected by the TGIP increased almost linearly to 23 °C and then leveled off at higher temperatures. We also found that the collector did not lose its ability to collect samples after being subjected to −75 °C temperatures (essentially frozen) and then thawed. These experiments have shown that the TGIP can operate effectively at temperatures expected on near-Earth asteroids, especially if collection is performed on the sunward side of the asteroid.     

A sample collector for robotic sample return missions II: Radiation tests

Sample return from small solar system objects is playing an increasingly important part in solar system exploration. Critical to such missions is a robust, simple, and economic sample collector. We have developed a collector such as this for near-Earth asteroid sample return missions that we have termed the Touch-and-Go Impregnable Pad (TGIP). The collector utilizes a silicone substrate that is pushed into the dust and gravel surface layer of the asteroid. As part of a systematic evaluation of the TGIP, we have investigated the resilience of this substrate to ionizing radiations. Several miniature versions of the collector, containing typically ∼3 g of the collection substrate, were exposed to 0.564 MeV beta particles from a ⁹⁰Sr source and a 6 MeV electron beam in a linear accelerator to simulate the wide range of energies of solar and galactic ionizing radiation. Various radiation levels up to eight times greater than expected on a six-year asteroid mission (in the case of beta radiation) and 50 times greater than expected (in the case of the 6 MeV electron radiation) were administered to the substrate. After irradiation, the efficiency of the substrate in collecting samples of mock regolith was compared with that of collectors that had not been irradiated. No difference beyond experimental uncertainty was observed and we suggest that the operational TGIP will not be affected adversely by radiation doses expected during a typical six-year inner solar system mission.     

Rapid impactor sample return (RISR) mission scenario

Due to the long lead time and great expense of traditional sample return mission plans to Mars or other astronomical bodies, there is a need for a new and innovative way to return materials, potentially at a lower cost. The Rapid Impactor Sample Return (RISR) mission is one such proposal. The general mission scenario involves a single pass of Mars, a Martian moon or an asteroid at high speeds (7 km/s), with the sample return vehicle skimming just 1 or 2 m above a high point (such as a top ridge on Olympus Mons on Mars) and releasing an impactor. The impactor strikes the ground, throwing up debris. The debris with roughly the same forward velocity will be captured by the sample return vehicle and returned to Earth. There is no delay or orbit in the vicinity of Mars or the asteroid: RISR is a one-pass mission. This paper discusses some of the details of the proposal. Calculations are presented that address the question of how much material can be recovered with this technique. There are concerns about the effect of Mars tenuous atmosphere. However, it will be noted that such issues do not occur for RISR style missions to Phobos, Deimos, or asteroids and Near Earth Objects (NEOs). Recent test results in the missile defense community (IFTs 6–8 in 2001, 2002) have scored direct hits at better than 1 m accuracy with closing velocities of 7.6 km/s, giving the belief that accuracy and sensing issues are developed to a point that the RISR mission scenario is feasible.     

嫦娥五号探测器GNC系统设计

为实现我国首次月球样品无人采样返回任务,设计了嫦娥五号(Chang’E 5)探测器制导、导航与控制(GNC)系统.根据任务要求和探测器特点,GNC系统设计分为轨道器GNC子系统、返回器GNC子系统和着上组合体GNC子系统.给出了嫦娥五号探测器GNC系统的架构设计、工作模式以及在轨飞行结果.结果表明,GNC系统设计正确,成功完成了动力下降、起飞上升、交会对接、返回再入等关键动作,实现了月球表面起飞上升、月球轨道交会对接以及携带月壤以近第二宇宙速度二次再入返回的三项首次任务,各项功能性能满足任务要求.     

Proposal for a multiple-asteroid-flyby mission with sample return

Asteroid exploration provides a new approach to study the formation of the solar system and the planetary evolution. Choosing a suitable target and designing of feasible profile for asteroid mission are challenging due to constraints such as scientific value and technical feasibility. This paper investigates a feasible mission scenario among the potential candidates of multiple flybys and sample return missions. First, a group of potential candidates are selected by considering the physical properties and accessibility of asteroids, for the sample return missions. Second, the feasible mission scenarios for multiple flybys and sample return missions to various spectral-type asteroids are investigated. We present the optimized design of preliminary interplanetary transfer trajectory for two kinds of missions. One is the single sample return mission to asteroids with various spectral types. The other is the multiple flybys and sample return mission to several asteroids. In order to find the optimal profiles, the planetary swing-by technique and Differential Evolution algorithm are used.     

Planetary protection issues for sample return missions.

Sample return missions from a comet nucleus and the Mars surface are currently under study in the US, USSR, and by ESA. Guidance on Planetary Protection (PP) issues is needed by mission scientists and engineers for incorporation into various elements of mission design studies. Although COSPAR has promulgated international policy on PP for various classes of solar system exploration missions, the applicability of this policy to sample return missions, in particular, remains vague. In this paper, we propose a set of implementing procedures to maintain the scientific integrity of these samples. We also propose that these same procedures will automatically assure that COSPAR-derived PP guidelines are achieved. The recommendations discussed here are the first step toward development of official COSPAR implementation requirements for sample return missions.     

The ORGANIC experiment on EXPOSE-R on the ISS: Flight sample preparation and ground control spectroscopy

In March of 2009, the ORGANIC experiment integrated into the European multi-user facility EXPOSE-R, containing experiments dedicated to Astrobiology, was mounted through Extra Vehicular Activity (EVA) externally on the International Space Station (ISS). The experiment exposed organic samples of astronomical interest for a duration of 97 weeks (∼22 months) to the space environment. The samples that were returned to Earth in spring 2011, received a total UV radiation dose during their exposure including direct solar irradiation of >2500 h, exceeding the limits of laboratory simulations. We report flight sample preparation and pre-flight ultraviolet–visible (UV–Vis) characterization of the ORGANIC samples, which include 11 polycyclic aromatic hydrocarbons (PAHs) and three fullerenes. The corresponding time-dependent ground control monitoring experiments for ORGANIC measured over ∼19 months are presented and the results anticipated upon return of the samples are discussed. We present the first UV–Vis spectrum of solid circobiphenyl (C₃₈H₁₆). Further, we present the first published UV–Vis spectra of diphenanthro[9,10-b′,10′-d]thiophene (C₂₈H₁₆S), dinaphtho[8,1,2-abc,2′,1′,8′-klm]coronene (C₃₆H₁₆), tetrabenzo[de,no,st,c′d′]heptacene (C₄₂H₂₂), and dibenzo[jk,a′b′]octacene (C₄₀H₂₂) in solid phase and in solution. The results of the ORGANIC experiment are expected to enhance our knowledge of the evolution and degradation of large carbon-containing molecules in space environments.     

Planetary protection, legal ambiguity and the decision making process for Mars sample return.

As scientists and mission planners develop planetary protection requirements for future Mars sample return missions, they must recognize the socio-political context in which decisions about the mission will be made and pay careful attention to public concerns about potential back contamination of Earth. To the extent that planetary protection questions are unresolved or unaddressed at the time of an actual mission, they offer convenient footholds for public challenges in both legal and decision making realms, over which NASA will have little direct control. In this paper, two particular non-scientific areas of special concern are discussed in detail: 1) legal issues and 2) the decision making process. Understanding these areas is critical for addressing legitimate public concerns as well as for fulfilling procedural requirements regardless whether sample return evokes public controversy. Legal issues with the potential to complicate future missions include: procedural review under National Environmental Policy Act (NEPA); uncertainty about institutional control and authority; conflicting regulations and overlapping jurisdictions; questions about international treaty obligations and large scale impacts; uncertanities about the nature of the organism; and constitutional and regulatory concerns about quarantine, public health and safety. In light of these important legal issues, it is critical that NASA consider the role and timing of public involvement in the decision making process as a way of anticipating problem areas and preparing for legitimate public questions and challenges to sample return missions.     

一种短航程再入解析预测校正制导方法

针对载人探月飞船高速再入返回问题,提出了一种短航程低过载的再入解析预测校正制导方法。引入大升阻比航天器滑翔式再入的概念,通过设定再入过程中滑翔段轨迹形式,利用轨迹参数描述滑翔段轨迹,推导出预测航程的解析公式。为使终端误差满足要求,通过试位法校正轨迹参数,并换算得到倾侧角制导指令。在偏差条件下进行仿真,实现了飞船2100km任务航程下400~450s内以低于6.5g₀的过载再入,结果表明,所提制导方法具有较高的精度和较强的鲁棒性,为载人探月飞船应急快速返回提供了参考思路。      

Mars Sample Return: Do Australians trust NASA?

Mars Sample Return (MSR) represents an important scientific goal in space exploration. Any sample return mission will be extremely challenging from a scientific, economic and technical standpoint. But equally testing, will be communicating with a public that may have a very different perception of the mission. A MSR mission will generate international publicity and it is vital that NASA acknowledge the nature and extent of public concern about the mission risks and, perhaps equally importantly, the public’s confidence in NASA’s ability to prepare for and manage these risks. This study investigated the level of trust in NASA in an Australian population sample, and whether this trust was dependent on demographic variables. Participants completed an online survey that explored their attitudes towards NASA and a MSR mission. The results suggested that people believe NASA will complete the mission successfully but have doubts as to whether NASA will be honest when communicating with the public. The most significant finding to emerge from this study was that confidence in NASA was significantly (p < 0.05) related to the respondent’s level of knowledge regarding the risks and benefits of MSR. These results have important implications for risk management and communication.     

On tethered sample and mooring systems near irregular asteroids

A tethered asteroid sample and mooring system is investigated in this paper. In this system the spacecraft is moored to the surface of an irregular asteroid such as 216 Kleopatra by using a rocket-propelled anchor with a cable. The rocket-propelled anchor is a kind of space penetrator, which can inject into asteroids at high speeds generated by its own rocket engine. It can be used to explore the interior structure of asteroids, and it can also be used as a sample collector. When the sampling mission is done, the sample can be pulled back to the spacecraft with the anchor. Using this method, the spacecraft can be kept in a safe region in which it cannot be trapped by the gravitational field of the asteroid. This work is concerned with the dynamics of the tethered system near irregular asteroids. First, a shape model and gravitational field model of irregular asteroids are built. Then, the configuration and the stability of the tethered system are investigated, and the quasi-periodic motion near the equilibrium point of the tethered system is analyzed. Finally, the non-uniform density distribution of the asteroids is considered. The deployment process and the oscillation of the tethered system in the uncertain asteroid gravity field are simulated using the Monte Carlo method. The feasibility of the tethered asteroid sample and mooring system is proved.     

Thermal protection system development,testing, and qualification for atmospheric probes and sample return missions: Examples for Saturn,Titan and Stardust-type sample return

The science community has continued to be interested in planetary entry probes, aerocapture, and sample return missions to improve our understanding of the Solar System. As in the case of the Galileo entry probe, such missions are critical to the understanding not only of the individual planets, but also to further knowledge regarding the formation of the Solar System. It is believed that Saturn probes to depths corresponding to 10 bars will be sufficient to provide the desired data on its atmospheric composition. An aerocapture mission would enable delivery of a satellite to provide insight into how gravitational forces cause dynamic changes in Saturn’s ring structure that are akin to the evolution of protoplanetary accretion disks. Heating rates for the “shallow” Saturn probes, Saturn aerocapture, and sample Earth return missions with higher re-entry speeds (13–15 km/s) from Mars, Venus, comets, and asteroids are in the range of 1–6 KW/cm². New, mid-density thermal protection system (TPS) materials for such probes can be mission enabling for mass efficiency and also for use on smaller vehicles enabled by advancements in scientific instrumentation. Past consideration of new Jovian multiprobe missions has been considered problematic without the Giant Planet arcjet facility that was used to qualify carbon phenolic for the Galileo probe. This paper describes emerging TPS technologies and the proposed use of an affordable, small 5 MW arcjet that can be used for TPS development, in test gases appropriate for future planetary probe and aerocapture applications. Emerging TPS technologies of interest include new versions of the Apollo Avcoat material and a densified variant of Phenolic Impregnated Carbon Ablator (PICA). Application of these and other TPS materials and the use of other facilities for development and qualification of TPS for Saturn, Titan, and Sample Return missions of the Stardust class with entry speeds from 6.0 to 28.6 km/s are discussed.     

基于遗传算法的航天器再入动态终迹圈研究

为实现航天器安全准确地沿最优飞行轨迹再入,对航天器再入飞行过程中任意时刻飞行状态,在满足所有约束条件下,计算航天器所能达到的地面最大着陆区域,以判断该时刻飞行器能否到达预定着陆点。文章采用改进的遗传算法对航天器再入飞行轨迹进行优化,结合再入动态终迹圈计算方法,实现再入动态终迹圈的仿真计算。通过对仿真结果的对比分析,得到再入动态终迹圈及相应再入飞行轨迹的特性,对航天器再入飞行制导及航迹规划具有一定的借鉴意义。     

Planetary protection on international waters: An onboard protocol for capsule retrieval and biosafety control in sample return mission

Planetary protection has been recognized as one of the most important issues in sample return missions that may host certain living forms and biotic signatures in a returned sample. This paper proposes an initiative of sample capsule retrieval and onboard biosafety protocol in international waters for future biological and organic constituent missions to bring samples from possible habitable bodies in the solar system. We suggest the advantages of international waters being outside of national jurisdiction and active regions of human and traffic affairs on the condition that we accept the Outer Space Treaty. The scheme of onboard biological quarantine definitely reduces the potential risk of back-contamination of extraterrestrial materials to the Earth.     

Challenges of the rosetta sample return mission

Rosetta is a correrstone mission of the science programme of the European Space Agency (ESA) and it has been studied as a collaborative project with NASA. The major scientific objectives of Rosetta is to return cometary samples to Earth. About 20 kg of cometary material from up to 3m below the surface would be made available to the scientific community for analysis. Since relatively little is known a priory about the environment to be expected, the mission design must be based on a limited body of knowledge and rely on autonomy. The paper outlines the main mission characteristics and the experimental approach to demonstrate the mission feasibility.     

一种深空粒子采样返回探测器构型设想

以太阳风粒子、深空尘埃等为目标的采样返回探测任务是空间科学与深空探测研究的热点方向之一。对“星尘号”“起源号”两个典型采样返回探测器的构型进行了分析,并梳理了其主要构型特点。结合我国月地高速再入返回飞行器的构型特点,提出了一种深空粒子采样返回探测器构型的设想：总体构型由长方形主体和流线型返回器组成,主体构型适应于承载返回器和其他装器设备,返回器构型适应于样品收集和再入返回气动外形。设计方案采用了充气式采样器进行粒子收集,具有体积小、重量轻、折叠效率高、展开可靠、工程实施简单等特点,并采用了可重复收拢展开的太阳翼,能够适应收集不同类型深空粒子的需求。     

Development of a thin section device for space exploration: Overview and system performance estimates

In this paper we present a conceptual design of a spaceborne instrument for the in situ production of rock thin sections on planetary surfaces. The in situ Automated Rock Thin Section Instrument (IS-ARTS) conceptual design demonstrates that the in situ production of thin sections on a planetary body is a plausible new instrument capability for future planetary exploration. Thin section analysis would reduce much ambiguity in the geological history of a sampled site that is present with instruments currently flown. The technical challenge of producing a thin section device compatible with the spacecraft environment is formidable and has been thought too technically difficult to be practical. Terrestrial thin section preparation requires a skilled petrographist, several preparation instruments that individually exceed typical spacecraft mass and power limits, and consumable materials that are not easily compatible with spaceflight. In two companion papers we present research and development work used to constrain the capabilities of IS-ARTS in the technical space compatible with the spacecraft environment. For the design configuration shown we conclude that a device can be constructed that is capable of 50 sample preparations over a 2 year lifespan with mass, power, and volume constraints compatible with current landed Mars mission configurations. The technical requirements of IS-ARTS (mass, power and number of samples produced) depend strongly on the sample mechanical properties, sample processing rate, the sample size and number of samples to be produced.     

Use of coated silicon field emitters as neutralisers for fundamental physics space missions

Spacecraft neutralisers are required as part of the ion propulsion system for accurate station keeping in fundamental physics missions. This paper describes the use of thin layers of insulating materials as coatings for the gated silicon field emitter array structure used in a spacecraft neutraliser. These thin coatings are postulated to reduce power consumption and reduce overheating. The power consumption and lifetime of aluminium nitride and amorphous hydrogenated diamond-like carbon coatings have been tested by current–voltage and endurance tests. Diamond-like carbon coatings were promising, performing better in endurance tests than uncoated samples, but further work is required to characterise the coating’s physical properties and its effects on field emission. The thermal conductivity of the coating material had little effect on measured sample lifetimes. Aluminium nitride had reduced power consumption compared to diamond-like carbon coated and uncoated samples. A thin (∼5 nm) layer of aluminium nitride was found to be optimal, meeting European Space Agency specifications for the neutraliser engineering model.