A sample collector for robotic sample return missions II: Radiation tests

Sample return from small solar system objects is playing an increasingly important part in solar system exploration. Critical to such missions is a robust, simple, and economic sample collector. We have developed a collector such as this for near-Earth asteroid sample return missions that we have termed the Touch-and-Go Impregnable Pad (TGIP). The collector utilizes a silicone substrate that is pushed into the dust and gravel surface layer of the asteroid. As part of a systematic evaluation of the TGIP, we have investigated the resilience of this substrate to ionizing radiations. Several miniature versions of the collector, containing typically ∼3 g of the collection substrate, were exposed to 0.564 MeV beta particles from a ⁹⁰Sr source and a 6 MeV electron beam in a linear accelerator to simulate the wide range of energies of solar and galactic ionizing radiation. Various radiation levels up to eight times greater than expected on a six-year asteroid mission (in the case of beta radiation) and 50 times greater than expected (in the case of the 6 MeV electron radiation) were administered to the substrate. After irradiation, the efficiency of the substrate in collecting samples of mock regolith was compared with that of collectors that had not been irradiated. No difference beyond experimental uncertainty was observed and we suggest that the operational TGIP will not be affected adversely by radiation doses expected during a typical six-year inner solar system mission.     

A sample collector for robotic sample return missions III: Impact survivability studies

Laboratory impact tests have been performed on experimental versions of a proposed robotic sample collector for extraterrestrial samples. The collector consists of a retractable aluminum ring containing an impregnable silicone compound that is pressed into the surface of the body to be sampled. As part of a comprehensive program to evaluate this idea, we have performed tests to determine if the samples embedded in the collector medium can survive the impact forces experienced during direct reentry, such as that of the recent Genesis sample return mission. For the present study, samples of sand, rock, glass, and chalk were subjected to decelerations of 1440–2880 g using drop tests. We found that even the most fragile samples, chosen to be representative of a wide range of the types of materials found on the surface of asteroids that have currently been studied, can withstand impacts of the intensity experienced by a sample return capsule during direct reentry.     

A multiple-rendezvous,sample-return mission to two near-Earth asteroids

We propose a dual-rendezvous mission, targeting near-Earth asteroids, including sample-return. The mission, Asteroid Sampling Mission (ASM), consists of two parts: (i) flyby and remote sensing of a Q-type asteroid, and (ii) sampling of a V-type asteroid. The targeted undifferentiated Q-type are found mainly in the near-Earth space, and to this date have not been the target of a space mission. We have chosen, for our sampling target, an asteroid from the basaltic class (V-type), as asteroids in this class exhibit spectral signatures that resemble those of the well-studied Howardite–Eucrite–Diogenite (HED) meteorite suite. With this mission, we expect to answer specific questions about the links between differentiated meteorites and asteroids, as well as gain further insight into the broader issues of early Solar System (SS) evolution and the formation of terrestrial planets. To achieve the mission, we designed a spacecraft with a dry mass of less than 3 tonnes that uses electric propulsion with a solar-electric power supply of 15 kW at 1 Astronomical Unit (AU). The mission includes a series of remote sensing instruments, envisages landing of the whole spacecraft on the sampling target, and employs an innovative sampling mechanism. Launch is foreseen to occur in 2018, as the designed timetable, and the mission would last about 10 years, bringing back a 150 g subsurface sample within a small re-entry capsule. This paper is a work presented at the 2008 Summer School Alpbach,“Sample return from the Moon, asteroids and comets” organized by the Aeronautics and Space Agency of the Austrian Research Promotion Agency. It is co-sponsored by ESA and the national space authorities of its Member and Co-operating States, with the support of the International Space Science Institute and Austrospace.     

Proposal for a multiple-asteroid-flyby mission with sample return

Asteroid exploration provides a new approach to study the formation of the solar system and the planetary evolution. Choosing a suitable target and designing of feasible profile for asteroid mission are challenging due to constraints such as scientific value and technical feasibility. This paper investigates a feasible mission scenario among the potential candidates of multiple flybys and sample return missions. First, a group of potential candidates are selected by considering the physical properties and accessibility of asteroids, for the sample return missions. Second, the feasible mission scenarios for multiple flybys and sample return missions to various spectral-type asteroids are investigated. We present the optimized design of preliminary interplanetary transfer trajectory for two kinds of missions. One is the single sample return mission to asteroids with various spectral types. The other is the multiple flybys and sample return mission to several asteroids. In order to find the optimal profiles, the planetary swing-by technique and Differential Evolution algorithm are used.     

A small mission for in situ exploration of a primitive binary near-Earth asteroid

We present a concept for a challenging in situ science mission to a primitive, binary near-Earth asteroid. A sub-400-kg spacecraft would use solar electric propulsion to rendezvous with the C-class binary asteroid (175706) 1996 FG3. A campaign of remote observations of both worlds would be followed by landing on the ∼1 km diameter primary to perform in situ measurements. The total available payload mass would be around 34 kg, allowing a wide range of measurement objectives to be addressed. This mission arose during 2004 from the activities of the ad-hoc Small Bodies Group of the DLR-led Planetary Lander Initiative. Although the particular mission scenario proposed here was not studied further per se, the experience was carried over to subsequent European asteroid mission studies, including first LEONARD and now the Marco Polo near-Earth asteroid sample return proposal for ESA’s Cosmic Vision programme. This paper may thus be of interest as much for insight into the life cycle of mission proposals as for the concept itself.     

Rapid impactor sample return (RISR) mission scenario

Due to the long lead time and great expense of traditional sample return mission plans to Mars or other astronomical bodies, there is a need for a new and innovative way to return materials, potentially at a lower cost. The Rapid Impactor Sample Return (RISR) mission is one such proposal. The general mission scenario involves a single pass of Mars, a Martian moon or an asteroid at high speeds (7 km/s), with the sample return vehicle skimming just 1 or 2 m above a high point (such as a top ridge on Olympus Mons on Mars) and releasing an impactor. The impactor strikes the ground, throwing up debris. The debris with roughly the same forward velocity will be captured by the sample return vehicle and returned to Earth. There is no delay or orbit in the vicinity of Mars or the asteroid: RISR is a one-pass mission. This paper discusses some of the details of the proposal. Calculations are presented that address the question of how much material can be recovered with this technique. There are concerns about the effect of Mars tenuous atmosphere. However, it will be noted that such issues do not occur for RISR style missions to Phobos, Deimos, or asteroids and Near Earth Objects (NEOs). Recent test results in the missile defense community (IFTs 6–8 in 2001, 2002) have scored direct hits at better than 1 m accuracy with closing velocities of 7.6 km/s, giving the belief that accuracy and sensing issues are developed to a point that the RISR mission scenario is feasible.     

On tethered sample and mooring systems near irregular asteroids

A tethered asteroid sample and mooring system is investigated in this paper. In this system the spacecraft is moored to the surface of an irregular asteroid such as 216 Kleopatra by using a rocket-propelled anchor with a cable. The rocket-propelled anchor is a kind of space penetrator, which can inject into asteroids at high speeds generated by its own rocket engine. It can be used to explore the interior structure of asteroids, and it can also be used as a sample collector. When the sampling mission is done, the sample can be pulled back to the spacecraft with the anchor. Using this method, the spacecraft can be kept in a safe region in which it cannot be trapped by the gravitational field of the asteroid. This work is concerned with the dynamics of the tethered system near irregular asteroids. First, a shape model and gravitational field model of irregular asteroids are built. Then, the configuration and the stability of the tethered system are investigated, and the quasi-periodic motion near the equilibrium point of the tethered system is analyzed. Finally, the non-uniform density distribution of the asteroids is considered. The deployment process and the oscillation of the tethered system in the uncertain asteroid gravity field are simulated using the Monte Carlo method. The feasibility of the tethered asteroid sample and mooring system is proved.     

近地小行星防御策略分析

近年来,各国针对近地小行星的威胁及相应防御策略的研究越来越多。调研了国内外近地天体观测发展现状和多种近地小行星撞击地球的防御策略,通过比较分析防御策略的实现原理、关键技术和存在的问题,对各种策略的适用性、可行性和有效性进行了评估。通过对各种策略的分析和总结,结合我国近地小行星防御策略的研究现状,尝试性提出了采用多种策略组合的方式对有潜在威胁的小行星采取相关有效方案,为航天器的研制和防御策略的实施争取更多的时间。     

Study of complex dielectric properties of lunar simulants and comparison with Apollo samples at microwave frequencies

Laboratory characterization of dielectric properties of terrestrial analogues of lunar soil (JSC-1A) and comparison with lunar samples returned from various Apollo missions is made at different as well as normalized bulk density. Here measurements of dielectric constants and losses were made at four microwave frequencies such as 1.7 GHz, 2.5 GHz, 6.6 GHz and 31.6 GHz. Complex permittivity of lunar simulant was measured at temperature ranging from −190 °C to + 200 °C using Wave-Guide cell method. Comparison of permittivity of JSC-1A with Apollo sample also has been done at similar microwave frequencies. The investigations reveal that dielectric constant and loss factor of terrestrial analogues of lunar soil are temperature dependent. As temperature is gradually increased both these parameter (storage factor and loss factor) also gradually increases. These temperatures were chosen because the Moon undergoes at that extremes level of temperature. It is scorching heat at 110 °C during the day and freezing cold at −180 °C during night. The measured value of ε can be useful for designing passive as well as active sensors.     

Synergistic approach of asteroid exploitation and planetary protection

The asteroid and cometary impact hazard has long been recognised as an important issue requiring risk assessment and contingency planning. At the same time asteroids have also been acknowledged as possible sources of raw materials for future large-scale space engineering ventures. This paper explores possible synergies between these two apparently opposed views; planetary protection and space resource exploitation. In particular, the paper assumes a 5 tonne low-thrust spacecraft as a baseline for asteroid deflection and capture (or resource transport) missions. The system is assumed to land on the asteroid and provide a continuous thrust able to modify the orbit of the asteroid according to the mission objective. The paper analyses the capability of such a near-term system to provide both planetary protection and asteroid resources to Earth. Results show that a 5 tonne spacecraft could provide a high level of protection for modest impact hazards: airburst and local damage events (caused by 15–170 m diameter objects). At the same time, the same spacecraft could also be used to transport to bound Earth orbits significant quantities of material through judicious use of orbital dynamics and passively safe aero-capture manoeuvres or low energy ballistic capture. As will be shown, a 5 tonne low-thrust spacecraft could potentially transport between 12 and 350 times its own mass of asteroid resources by means of ballistic capture or aero-capture trajectories that pose very low dynamical pressures on the object.     

Thermal protection system development,testing, and qualification for atmospheric probes and sample return missions: Examples for Saturn,Titan and Stardust-type sample return

The science community has continued to be interested in planetary entry probes, aerocapture, and sample return missions to improve our understanding of the Solar System. As in the case of the Galileo entry probe, such missions are critical to the understanding not only of the individual planets, but also to further knowledge regarding the formation of the Solar System. It is believed that Saturn probes to depths corresponding to 10 bars will be sufficient to provide the desired data on its atmospheric composition. An aerocapture mission would enable delivery of a satellite to provide insight into how gravitational forces cause dynamic changes in Saturn’s ring structure that are akin to the evolution of protoplanetary accretion disks. Heating rates for the “shallow” Saturn probes, Saturn aerocapture, and sample Earth return missions with higher re-entry speeds (13–15 km/s) from Mars, Venus, comets, and asteroids are in the range of 1–6 KW/cm². New, mid-density thermal protection system (TPS) materials for such probes can be mission enabling for mass efficiency and also for use on smaller vehicles enabled by advancements in scientific instrumentation. Past consideration of new Jovian multiprobe missions has been considered problematic without the Giant Planet arcjet facility that was used to qualify carbon phenolic for the Galileo probe. This paper describes emerging TPS technologies and the proposed use of an affordable, small 5 MW arcjet that can be used for TPS development, in test gases appropriate for future planetary probe and aerocapture applications. Emerging TPS technologies of interest include new versions of the Apollo Avcoat material and a densified variant of Phenolic Impregnated Carbon Ablator (PICA). Application of these and other TPS materials and the use of other facilities for development and qualification of TPS for Saturn, Titan, and Sample Return missions of the Stardust class with entry speeds from 6.0 to 28.6 km/s are discussed.     

近地小行星威胁与防御研究现状

近地小行星与地球碰撞虽然罕见但可能会造成灾难性后果。近年来,各国加强了对近地小行星的监控、跟踪力度,并且实施了几次卓有成效的探测任务,如何防御近地小行星威胁的研究越来越多。总结了目前近地小行星的主要观测监视设施和现状,讨论了国际上对小行星威胁的评估情况,分析和评估了目前提出的防御手段的研究现状及其可行性。     

深空撞击载荷总体技术分析与效能仿真

以近地小行星2016HO3为深空撞击目标开展科学探测,从爆炸成型弹丸技术、安全可靠爆炸技术、撞击载荷分离技术、撞击效能仿真技术等7个方面系统详细地进行了基于聚能爆炸成型弹丸的撞击载荷技术体系解析与技术内涵阐述,给出了深空撞击载荷初步总体设计方案;通过弹丸撞击靶板的数值模拟仿真,得到了撞击速度在0.2～0.4 cm/μs...     

Effects of lighting and air movement on temperatures in reproductive organs of plants in a closed plant growth facility

Temperature increases in plant reproductive organs such as anthers and stigmas could cause fertility impediments and thus produce sterile seeds under artificial lighting conditions without adequately controlled environments in closed plant growth facilities. There is a possibility such a situation could occur in Bioregenerative Life Support Systems under microgravity conditions in space because there will be little natural convective or thermal mixing. This study was conducted to determine the temperature of the plant reproductive organs as affected by illumination and air movement under normal gravitational forces on the earth and to make an estimation of the temperature increase in reproductive organs in closed plant growth facilities under microgravity in space. Thermal images of reproductive organs of rice and strawberry were captured using infrared thermography at air temperatures of 10–11 °C. Compared to the air temperature, temperatures of petals, stigmas and anthers of strawberry increased by 24, 22 and 14 °C, respectively, after 5 min of lighting at an irradiance of 160 W m⁻² from incandescent lamps. Temperatures of reproductive organs and leaves of strawberry were significantly higher than those of rice. The temperatures of petals, stigmas, anthers and leaves of strawberry decreased by 13, 12, 13 and 14 °C, respectively, when the air velocity was increased from 0.1 to 1.0 ms⁻¹. These results show that air movement is necessary to reduce the temperatures of plant reproductive organs in plant growth facilities.     

Penetration testing for the Optical Probe for Regolith Analysis (OPRA)

The Optical Probe for Regolith Analysis (OPRA) is a spike-shaped subsurface analytical probe that will be delivered to a planet, asteroid, or cometary body by a lander and/or rover. OPRA will be pushed down into the subsurface to record near infrared spectra as a function of depth down to maximum of 50 cm. Therefore, knowledge of the required penetration force to specific depths can be helpful in estimating the length of the probe. Test probes covering the anticipated diameter (2.5, 1.9, 1.2 and 0.9 cm diameter) and tip angle (T.A. = 30°, 60°, 90° and 120°) of OPRA were inserted mechanically into dry playground sand. The results showed that tip angle does not have a major effect, while probe diameter and density of the regolith are the most important parameters. Increasing probe diameter from 0.9 to 1.9 cm (i.e. a factor of 2) leads to an increase in penetration force from 200 to 1000 N (i.e. a factor of 5) at 20 cm depth. An increase in bulk density (B.D.) from 1550 to 1700 kg m⁻³ leads to an increase in penetration force from 10 to 200 N at 20 cm depth. Bearing capacity theory was used to explain the downward movement of the penetrometer through regolith and showed good agreement with the experimental results. This model was then used to take into account the effect of gravity on other planetary bodies. We observed a good agreement between the theoretical model and results from penetration testings on the Moon by the Apollo missions. Since the maximum allowed force for penetration is the weight of the lander/rover on their targeted planetary surface, our results put a strong constraint on the maximum reachable depth without endangering the whole mission.     

从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

Mars Sample Return: Do Australians trust NASA?

Mars Sample Return (MSR) represents an important scientific goal in space exploration. Any sample return mission will be extremely challenging from a scientific, economic and technical standpoint. But equally testing, will be communicating with a public that may have a very different perception of the mission. A MSR mission will generate international publicity and it is vital that NASA acknowledge the nature and extent of public concern about the mission risks and, perhaps equally importantly, the public’s confidence in NASA’s ability to prepare for and manage these risks. This study investigated the level of trust in NASA in an Australian population sample, and whether this trust was dependent on demographic variables. Participants completed an online survey that explored their attitudes towards NASA and a MSR mission. The results suggested that people believe NASA will complete the mission successfully but have doubts as to whether NASA will be honest when communicating with the public. The most significant finding to emerge from this study was that confidence in NASA was significantly (p < 0.05) related to the respondent’s level of knowledge regarding the risks and benefits of MSR. These results have important implications for risk management and communication.     

载人小行星探测的总体方案设想

载人探测近地小行星的工程规模和技术难度介于载人探月和载人火星探测之间,是人类开展载人火星探测和飞向更遥远深空的跳板,对于航天技术的发展和科学问题的探索有着极其重要的意义。在调研国外载人小行星探测方案设想的基础上,结合我国航天技术现状和发展趋势,提出了一种载人小行星探测的总体方案设想,并梳理了载人小行星探测的关键技术。研究成果可以作为我国载人小行星探测任务论证和设计的有益参考。     

Small satellite survey mission to the second Earth moon

This paper presents an innovative space mission devoted to the survey of the small Earth companion asteroid by means of nano platforms. Also known as the second Earth moon, Cruithne, is the target identified for the mission. Both the trajectory to reach the target and a preliminary spacecraft budget are here detailed. The idea is to exploit high efficient ion thrusters to reduce the propellant mass fraction in such a high total impulse mission (of the order of 1e6 Ns). This approach allows for a 100 kg class spacecraft with a very small Earth escape energy (5 km²/s²) to reach the destination in about 320 days. The 31% propellant mass fraction allows for a payload mass fraction of the order of 8% and this is sufficient to embark on such a small spacecraft a couple of nano-satellites deployed once at the target to carry out a complete survey of the asteroid. Two 2U Cubesats are here considered as representative payload, but also other scientific payloads or different platforms might be considered according with the specific mission needs. The small spacecraft used to transfer these to the target guarantees the manoeuvre capabilities during the interplanetary journey, the protection against radiations along the path and the telecommunication relay functions for the data transmission with Earth stations. The approach outlined in the paper offers reliable solutions to the main issues associated with a deep space nano-satellite mission thus allowing the exploitation of distant targets by means of these tiny spacecraft. The study presents an innovative general strategy for the NEO observation and Cruithne is chosen as test bench. This target, however, mainly for its relevant inclination, requires a relatively large propellant mass fraction that can be reduced if low inclination asteroids are of interest. This might increase the payload mass fraction (e.g. additional Cubesats and/or additional scientific payloads on the main bus) for the same 100 kg class mission.     

The feasibility of using an L1 positioned dust cloud as a method of space-based geoengineering

In this paper a method of geoengineering is proposed involving clouds of dust placed in the vicinity of the L₁ point as an alternative to the use of thin film reflectors. The aim of this scheme is to reduce the manufacturing requirement for space-based geoengineering. It has been concluded that the mass requirement for a cloud placed at the classical L₁ point, to create an average solar insolation reduction of 1.7%, is 7.60 × 10¹⁰ kg yr⁻¹ whilst a cloud placed at a displaced equilibrium point created by the inclusion of the effect of solar radiation pressure is 1.87 × 10¹⁰ kg yr⁻¹. These mass ejection rates are considerably less than the mass required in other unprocessed dust cloud methods proposed and are comparable to thin film reflector geoengineering requirements. Importantly, unprocessed dust sourced in-situ is seen as an attractive scheme compared to highly engineered thin film reflectors. It is envisaged that the required mass of dust can be extracted from captured near Earth asteroids, whilst stabilised in the required position using the impulse provided by solar collectors or mass drivers used to eject material from the asteroid surface.