共查询到18条相似文献,搜索用时 78 毫秒
1.
微带天线阵广泛应用于星载合成孔径雷达天线,一般为非对称蜂窝夹层结构。文章对微带阵天线板的材料、制造技术及试验过程进行了讨论。计算和试验结果表明,微带阵天线板采用蜂窝夹层结构,能够满足设计要求。 相似文献
2.
文章针对星载微带相控阵天线的结构,首先对非对称蜂窝夹层板加边框、非对称板加平衡铜箔层以及对称蜂窝夹层板三种阵面设计方案进行了分析、总结,指出了三种方案的不足之处。然后介绍了游离板设计的原理,建立了单板的有限元模型,进行了加工成型变形和在轨热变形分析。根据星载微带阵天线的结构指标要求,通过分析比较,得出游离板设计方案具有热变形最小、可以满足星载微带阵天线的结构性能指标的结论。 相似文献
3.
4.
5.
蜂窝夹层结构成型的质量受成型过程中工艺条件的影响很大,主要影响是使蜂芯压皱甚至塌垮造成整个蜂窝夹层结构失稳报废。简述美国采用的一种模拟蜂窝夹层试验板并引入了一个无量纲的蜂窝芯塌垮数(HCCN)来研究工艺条件对蜂窝芯受压塌垮的影响,分析芯子塌垮的机理,为制造高质量的蜂窝夹层结构提供了指南。 相似文献
6.
蜂窝夹层结构承力筒在FY-3卫星上的应用 总被引:1,自引:0,他引:1
为进一步提高卫星的性能,将蜂窝夹层结构用于“风云三号”(FY-3)卫星推进舱和服务舱的承力筒。对蜂窝夹层结构承力筒进行了设计、生产和试验,并对承力筒的结构参数进行了优化分析。计算和试验结果表明,卫星采用蜂窝夹层结构承力筒,能满足设计要求,对结构减重具有重要意义。 相似文献
7.
蜂窝夹层结构抛物面天线型面精度仿真分析 总被引:1,自引:0,他引:1
星载抛物面天线在绕地球工作时会产生较大的热变形。为了获得在近地服役环境下全尺寸反射器型面精度模拟的工程方法,采用ABAQUS有限元和最小二乘法,对口径1.2 m的小尺寸蜂窝夹层结构天线进行热变形和均方根(RMS)值计算,对热膨胀系数、蜂窝高度和蒙皮铺层数量等因素进行分析。结果表明:蜂窝高度方向的热膨胀系数是影响RMS值的最主要因素。当蜂窝高度为65 mm,上、下蒙皮铺层数量为12层时,型面精度RMS值满足设计要求。最后基于实际装配条件计算全尺寸反射器在-80~120℃下的热变形,发现紧固件和预埋件可以有效减小工作面热变形,并且得到全尺寸反射器RMS值为40.45μm。该研究结果可为星载固面蜂窝夹层结构反射面天线结构的设计提供依据。 相似文献
8.
风云一号天线反射板采用碳纤维/铝蜂窝夹层结构表面粘贴铝箔的结构形式。由于铝箔、碳纤维的热膨胀系数相差悬殊 ,因此具有很大的工艺难度。进行了大量的工艺实验后 ,在工艺特点分析和工艺实验的基础上 ,采用了合理的工艺路线 ,确定用中温胶双面贴铝箔作为天线反射板的铝箔粘贴工艺 ,解决了碳纤维/铝峰窝夹层结构表面粘贴铝箔胶接层中不能有气泡存在的工艺难点 ,满足了卫星轨道条件下不鼓泡、不脱落的使用要求 ,并保证了天线反射板平面度、孔位精度高的要求 相似文献
9.
10.
11.
12.
13.
In order to overcome the shortcoming of space-borne rigid antenna reflector made of carbon fiber reinforced plastic (CFRP) skins with aluminum honeycomb sandwich (SAHS) structure, a new type of full CFRP skin plus rib (SPR) structure ring-focused parabolic surface antenna reflector with the size of 2.5 m 1.9 m is designed. Under the condition that the original caliber, surface type, and interface remain unchanged, the main influence factors are designed and controlled. First, from the perspective of high stiffness, lightweight, and easy to form, a finite element simulation software is used to analyze and optimize the layout of the rib, the cross-sectional shape of the rib, the size of the rib, and the matching of the size and the coefficients of thermal expansion (CTEs) of the rib and the skin. Second, two structures are prepared by the autoclave molding process. Third, the weight and the surface precision root mean square (RMS) value are measured. The results show that the fundamental frequency of the SPR structure is 142.2 Hz, which is 3.5 Hz higher;the number of the new structural parts is reduced by 40%, and the forming process is greatly simplified. The total weight of the new structure is 11.9 kg, lighter 42.5%, indicating that the weight loss is obvious. The RMS value is 0.15 mm, which is slightly lower 0.01 mm but satisfies the accuracy requirement not greater than 0.3 mm. It is proved that the SPR structure reflector is a superior structure of the lightweight spaceborne antenna reflector. 相似文献
14.
根据伽辽金法,用Matlab/Simulink软件对推导的经典板假设理论、一阶剪切理论蜂窝夹层板运动方程进行了数值仿真。简单算例的计算结果表明两者基本一致。基于一阶剪切理论讨论了蜂窝夹芯泊松比对蜂窝夹层板低阶频率的影响。发现当泊松比接近1时对频率响应有显著的影响。 相似文献
15.
16.
17.