Electric interactions between dust and hot plasmas in the solar system.

Interaction of the charged particles of a plasma with a solid body is an old problem which has been investigated under various conditions, in particular by the authors in several papers. However, the electric potential of the grains may be more sensitive than expected to the physical state of grain matter and the physical parameters of plasmas in the solar system. Using a new model accounting for porosity, a characteristic feature of grains observed in the solar system, we have investigated the secondary electron emission under electron impact for porous materials. The conclusion is that porosity has a significant influence on the rate of electron ejection. It follows that the floating potential of porous grains can be different from that of grains made of bulk material, with consequences for grain dynamics in the environment of planets or comets.     

Field emission characteristics of gold dust grains

The space plasma environment usually contains charged dust grains. The grain charge is an important parameter determining its migration through the space, coagulation, formation of dust clouds and so on. The knowledge of its charge is thus one of the basic information we want to know. There are several emission processes leading to both positive and negative charges, among others photoemission, all kinds of secondary emissions, field emissions, etc. The present study is focused on a laboratory simulation of emissions caused by impacts by energetic ions. Our experiment is based on the Paul trap which gives us an opportunity to catch a single dust grain for several days inside the vacuum vessel and exposed it by electron/ion beams. This experimental approach allows us to separate an individual charging process. We have chosen spherically shaped gold grains and discussed the processes leading to the limitation of the grain charge. We suggested that the implantation of charging ions leads to deformations of the grain surface. The deformations enhance the local electric field strength that becomes sufficient for the field ionization.     

Effects of electrostatic forces on the vertical structure of planetary rings

We have calculated the vertical structure of planetary dust rings as it results from a balance between an electrostatic force on the dust grains and the vertical component of the gravitational force from the central planet. The electrostatic force results from the charging of the dust grains by the ambient plasma and a large scale electric field due to a shielding electric field and the resulting vertical dust distribution are strongly dependent on dust size, dust and plasma density, plasma temperature and plasma ion type. The dust density distribution has a different dependence on these parameters in tenuous and in dense dust rings. We solve the relevant equations numerically and also by linearization in the limiting cases of tenuous or dense rings. Our results indicate that the effects treated in this paper may be important in both Jupiter's and Saturn's rings.     

Energetic ion emission for active spacecraft control

Future space missions aiming at the accurate measurement of cold plasmas and DC to very low frequency electric fields will require that the potential of their conductive surfaces be actively controlled to be near the ambient plasma potential. In the near-Earth space these spacecraft are usually solar-cell powered; consequently, parts of their surface are most of the time exposed to solar photons. Outside the plasmasphere, a positive surface potential due the dominance of surface-emitted photoelectrons over ambient plasma electrons is to be expected. Photo- and ambient electrons largely determine the potential and positive values between a few Volts up to 100 V have been observed. Active ion emission is the obvious solution of this problem. A liquid metal ion emitter and a saddle field ion emitter are nearing the stage of flight unit fabrication. We will attempt to clamp the spacecraft potential to values close to the plasma potential. We present first results from vacuum chamber tests and describe the emission behaviour and characteristics of emitters producing, respectively, In⁺ and N₂⁺ beams with an energy of ≥ 5 keV.     

A comparison of the dust properties in recent periodic comets

Measurements of the thermal emission from the cometary dust coma can be used to derive the rate of dust production from the nucleus as well as the size distribution of absorbing grains. More than ten short-period comets have now been observed in the infrared over a wide range in heliocentric distance. Dust production rates are derived for these comets based on theoretical models of the thermal emission from small absorbing grains and calculations of dust grain velocities. The mean size and albedo of the dust grains is similar in these comets, with the exception of Comet Crommelin, which seems to have had larger, darker grains.     

Response of the electron energy distribution to an artificially emitted electron beam: Apex experiment

The paper is based on the electron and ion energy spectra measurement on board the main spacecraft of the APEX mission. During the active phase of the experiment an intense electron beam was emitted from the main satellite. The basic cycle of the electron injection is formed by current pulses of different frequencies, duration and intensity. The spacecraft potential changes due to the gun operation were compensated by a low energy Xe plasma generator. The data show that the response of the environment to the beam emission depends not only on injection parameters but on the spacecraft position and orientation with respect to the magnetic field as well. The typical response is an increase of the intensity of the low energy (less than 1 keV) electrons in all directions. In addition, strong field aligned fluxes of electrons and/or ions are observed with energies below the gun energy. An attempt to classify different types of response and to find possible mechanisms which can explain the observed phenomena is made in the present paper.     

Interaction between a body and its environment during a cometary fly-by

The surface of a spacecraft is submitted to the bombardment of dust grains and neutral molecules during an atmospheric re-entry or a cometary fly-by. These particles create secondary ions and electrons which form a plasma cloud around the body and control the electric potential of its surface. Computer simulation models are used to predict the structure and dynamic behaviour of the charged particle density distribution for the cases of planar and cylindrical bodies. It is found that an ion and an electron layer form in the vicinity of the surface at distances of the order of the ion and electron Debye lengths, respectively. The potential of the surface is positive on the average and is a function of the electron mean kinetic energy. A positive potential barrier develops at the location of the ion layer and its height is governed by the sum of the electron and ion mean kinetic energies. The threat caused by this interaction to the spacecraft and its instrumentation is discussed and an in-situ observation of this phenomenon is proposed as a possible diagnostic technique of the environment.     

On the nature of coronal loops above the quiet sun network

The structure and dynamics of a box in a stellar corona can be modeled employing a 3D MHD model for different levels of magnetic activity. Depending on the magnetic flux through the surface the nature of the resulting coronal structures can be quite different. We investigate a model of an active region for two sunspots surrounded by magnetic field patches comparable in magnetic flux to the sunspots. The model results in emission from the model corona being concentrated in loop structures. In Gudiksen and Nordlund (2005) the loops seen in EUV and X-ray emission outline the magnetic field, following the general paradigm. However, in our model, where the magnetic field is far from a force-free state, the loops seen in X-ray emission do not follow the magnetic field lines. This result is of interest especially for loops as found in areas where the magnetic field emerging from active regions interacts with the surrounding network.     

月尘静电迁移研究进展

月尘的静电悬浮和迁移是Apollo时期留下的最有争议的问题之一. 其既是研 究月球表面物质演化历史的重要线索, 也是探月工程必须考虑的重要因素. 月尘在月表环境下易因电子附着、光电效应、二次电子发射等过程带电, 并 在月球全球性静电场作用下发生迁移运动. 但目前对月尘静电迁移过程的认 识还不全面, 其主要原因在于对月尘静电特性的了解不够准确, 对静电迁移 过程的地面模拟不够充分以及对月球尘埃环境的探测较为缺乏. 未来需进一 步开展模拟月尘的研制, 月尘静电特性的分析, 静电迁移过程模拟以及尘埃 环境的探测等工作.      

高纬极区离子速度分布函数多项式解及非相干散射谱计算

为更准确描述高纬极区电离层离子分布函数, 分别采用弛豫碰撞模型和麦克斯韦分子碰撞模型描述玻耳兹曼方程的碰撞项, 通过求解两种模型下的输运方程, 分别得到两种模型基于麦克斯韦分布下离子分布函数的13矩近似和基于双麦克斯韦分布下离子分布函数的16矩近似. 进一步根据Sheffield理论, 利用两种模型下离子分布函数的13矩和16矩近似, 计算了非相干散射谱, 并对结果进行对比分析. 结果表明, 相对于弛豫碰撞模型, 麦克斯韦分子碰撞模型能更好地描述电离层E层中离子与中性成分的相互作用. 相对于离子分布函数的13矩近似, 16矩近似更适合描述由于电场增加导致的离子温度各向异性特征.      

A preliminary look at the dust in comet Halley

Highlights of infrared observations of the dust are discussed and compared with first results from the space probes. An emission feature was detected at 3.4 μm; the 10 and 20 μm silicate features were well-observed; and far-infrared data out to 160 μm were obtained. Organic material seems to be abundant in grains and may explain the 3.4 μm emission. Calculations are presented for one example of organic material. A component of the grains may volatize at temperatures around 300 K.     

Dynamic trapping of electrons in the porcupine ionospheric ion beam experiment

Electrons are needed to maintain quasineutrality in a case where positive ions are injected across the magnetic field into a limited volume in a magnetized plasma. In the absence of collisions, a positive potential builds up and traps the electrons which enter the region along the magnetic field. If the added density of ions exceeds the ambient density, large potential differences along the magnetic field can be maintained this way. The process explains several features of the Porcupine xenon ion beam injection experiment, where strong magnetic-field-aligned electric fields were measured in the vicinity of a xenon ion beam which was injected into the ambient ionosphere from a spinning subpayload.     

午后极光强度与太阳风-磁层耦合函数的相关

利用1997年和1998年南极中山站多通道扫描光度计的地面观测数据和Wind卫星在弓激波上游对行星际磁场和太阳风参数的观测数据,对午后高纬极光强度与太阳风-磁层耦合函数之间的相关性进行定量研究.研究表明,午后630.0nm极光强度与太阳风-磁层耦合函数间有很好的相关,而557.7nm的相关性差一些;在考察的所有耦合函数中,午后极光受太阳风电场和能量的影响更直接;同时,行星际磁场的时钟角对午后极光也有很强的控制作用.      

被试品辐射发射试验点位对测试结果影响

为提高试验精度,减小电磁兼容(EMC)半电波暗室中被试品(EUT)的电磁辐射发射试验点位对测试结果的影响,研究了不同试验点位对半电波暗室典型谐振频率电磁信号辐射发射的影响规律。采用几何光学、一致性绕射理论和多路径效应算法对不同试验点位,暗室典型谐振频率电磁信号的传输过程进行数学建模,剔除直射场强影响,综合考虑信号传输过程中产生的反射、折射、绕射和多径等电磁传播效应,给出了数学模型和计算公式。将数学传播模型与剔除直射场影响的试验实测模型计算结果进行比对,验证了数学模型的有效性。该研究为修正被试品在暗室内不同点位进行辐射发射试验的测试结果提供了理论依据,有助于提高被试品电磁辐射发射试验的测试精度。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

Use of coated silicon field emitters as neutralisers for fundamental physics space missions

Spacecraft neutralisers are required as part of the ion propulsion system for accurate station keeping in fundamental physics missions. This paper describes the use of thin layers of insulating materials as coatings for the gated silicon field emitter array structure used in a spacecraft neutraliser. These thin coatings are postulated to reduce power consumption and reduce overheating. The power consumption and lifetime of aluminium nitride and amorphous hydrogenated diamond-like carbon coatings have been tested by current–voltage and endurance tests. Diamond-like carbon coatings were promising, performing better in endurance tests than uncoated samples, but further work is required to characterise the coating’s physical properties and its effects on field emission. The thermal conductivity of the coating material had little effect on measured sample lifetimes. Aluminium nitride had reduced power consumption compared to diamond-like carbon coated and uncoated samples. A thin (∼5 nm) layer of aluminium nitride was found to be optimal, meeting European Space Agency specifications for the neutraliser engineering model.     

Spatial distribution of the magnetosheath ion flux

The magnetosheath plays a crucial role in solar wind-magnetosphere interaction because it is the magnetosheath magnetic field and plasma that interact with the magnetopause and magnetosphere, not the unshocked solar wind. We are presenting ion flux measurement statistics at both the dawn and dusk flanks of the magnetosheath and their comparison with a gasdynamic magnetosheath model. The study is based on three years of INTERBALL-1 measurements supported by simultaneous WIND solar wind and magnetic field observations. Statistical processing has shown (1) the limitations of the gasdynamic model, (2) the conditions favorable for the creation of a plasma depletion layer adjacent to the flank magnetopause, (3) strong dawn-dusk asymmetry of the ion fluxes, and (4) an evidence for the presence of a slow mode front adjacent to the magnetopause.     

太阳风电子在月表电磁场中的运动

月表磁异常区的分布是月球探测工程的重要内容. 但是由于月表电磁环境错综复 杂, 通常认为月球表面在特殊的空间天气条件下会带有数千伏电压. 以往的空间研究已经证实, 表面的带电与放电容易造成卫星仪器的异常或失联. 月表电场对电子 反射法有重要影响, 研究分析不同电磁条件下太阳风电子的运动轨迹,对月表环境 (电磁环境, 太阳风条件, 等离子体参数等)的研究可以更加深入细致. 通过模拟向月表运动的太阳风电子的运动轨迹, 分析了月表电磁环境的改变对太阳风电子反射 的影响, 并着重研究了月表电场对电子反射法遥感探测月表磁异常的影响, 为探测 月表电磁环境提供了重要的信息.      

Gyrosynchrotron Radiation of Interplanetary CMEs

CMEs (Coronal Mass Ejections) are an important means of energy release in the solar corona. Solar Polar Orbit Radio Telescope (SPORT) is a mission being proposed for observing the propagation of interplanetary CMEs from solar polar orbit. The main payload onboard SPORT is a synthetic aperture interferometric radiometer, which receives radio emission of interplanetary CMEs. It is identified that there are mainly three radio emission mechanisms of CMEs, i.e., bremsstrahlung, gyrosynchrotron emission and plasma emission. Among these emission types, bremsstrahlung emission is the main emission mechanism of the high-density plasma clouds of interplanetary CMEs. Gyrosynchrotron emission is the continuous emission generated by high-energy electrons from CMEs, while plasma emission is the main mechanism of transient radio bursts from CMEs. In this paper, the gyrosynchrotron emission of interplanetary CMEs is focused on. Firstly, the mechanism of gyrosynchrotron emission is reviewed. Secondly, a review of the physical parameter models of background solar wind and interplanetary CMEs is presented. After these, the brightness temperature and polarization of gyrosynchrotron emission of interplanetary CMEs are calculated and analyzed. Finally, the detectability of gyrosynchrotron emission of interplanetary CMEs by radio meters is discussed briefly.