非参量量化秩检测器的性能研究

 许多作者讨论过非参量秩检测器在雷达信号处理中的应用。秩检测器首先把接收波形样本转换为秩。如果检验单元和参考单元的噪声样本独立和分布,则无信号时检验单元的秩具有离散均匀分布,与输入噪声的分布无关。所以秩检测器可能提供分布自由的恒虚警率性能。量化秩检测器（QRD）只对二进量化秩进行积累,所以它实现起来很经济。本文分析QRD的检测性能。证明QRD有一最佳秩量化门限（ORQT）。确定高斯和韦伯噪声中的ORQT。另外,把QRD同高斯噪声中的局部最佳秩检测器和最佳参量检测器进行比较。     

Optimum detection and location estimation of target lines in the range-time space of a search radar

The average likelihood ratio detector is derived as the optimum detector for detecting a target line with unknown normal parameters in the range-time data space of a search radar, which is corrupted by Gaussian noise. The receiver operation characteristics of this optimum detector is derived to evaluate its performance improvement in comparison with the Hough detector, which uses the return signal of several successive scans to achieve a non-coherent integration improvement and get a better performance than the conventional detector. This comparison, which is done through analytic derivations and also through simulation results, shows that the average likelihood ratio detector has a better performance for different SNR values. This result is justified by showing the disadvantages of the Hough method, which are eliminated by the optimum detector. To have an estimate for the location of the detected target line in the optimum detection method as the Hough method, which detects and localizes the target lines simultaneously, we present the maximum a posteriori probability estimator. The estimation performance of the two methods is then compared and it is shown that the maximum a posteriori probability estimator localizes the detected target lines with a better performance in comparison with the Hough method.     

Detection of stochastic signals in the frequency domain

The optimum detector for a random signal, the estimator-correlator, is difficult to implement. If the power spectral density (PSD) of a continuous time signal is known, a locally optimum detector is available. It maximizes the deflection ratio (DR), a measure of the detector output signal-to-noise ratio (SNR). A discrete version of this detector is developed here, called the discrete-MDRD, which takes a weighted sum of the spectral components of the signal data as the detection statistic. Its derivation is applicable to nonwhite noise samples as well. A comparison of this new detector against three other common types, through their DR values and simulation results, reveals that the discrete-MDRD is near optimal at low SNRs. When the PSD of a signal is not known, a common test statistic is the peak of the PSD of the data. To reduce spectral variations, the PSD estimator first divides the data sequence into several segments and then forms the averaged PSD estimate. The segment length affects the DR values; the length that maximizes the DR is approximately the reciprocal of the signal bandwidth. Thus for unknown signal PSD, a detector that approaches the maximum DR is realizable from just the knowledge of the signal bandwidth, which is normally available. Examples and simulation results are provided to illustrate the properties and performance of the new detector     

Detection Performance of a Mean-Level Threshold

The problem of detecting signals in nonstationary clutter is met by presenting a mean-level or adaptive threshold which adjusts to the changing background level. Such a threshold performs better than a fixed threshold that must be set for the highest amplitude clutter. However, the mean-level threshold does not perform as well for stationary noise as a fixed threshold set at the proper value. One measure of effectiveness of an adaptive threshold is its performance in stationary noise (compared to the optimum fixed threshold) for a specified speed of response. For the mean-level threshold, a simple mathematical solution is found for the detection probability when the noise is stationary and the signal scintillates rapidly. The performance is evaluated for a wide range of mean-level-threshold time constants and for several false-alarm probabilities. The results are presented graphically. As an example, the mean-level threshold suffers 3 dB in detectability (equivalent signal-to-noise ratio) in the presence of stationary noise as compared to the optimum fixed threshold for 50-percent probability of detection, false-alarm probability of 10-8, and an adjustment time of 15 times the signal duration.     

Nonparametric Radar Extraction Using a Generalized Sign Test

A nonparametric procedure used in a constant false alarm rate (CFAR) radar extractor for detecting targets in a background of noise with unknown statistical properties is described. The detector is based on a generalization of the well-known two-sample sign test and thus requires a set of reference noise observations in addition to the set of observations being tested for signal presence. The detection performance against Gaussian noise is determined for a finite number of observations and asymptotically, for both nonfluctuating and pulse-to-pulse Rayleigh fluctuating target statistics. It is noted that the performance loss, as compared to the optimum parametric detector, depends critically on the number of reference noise observations available when the number of hits per target is not large. In the same case a much larger loss is also found for a pulse-to-pulse fluctuating target even though the asymptotic loss is the same as for a nonfluctuating target. A comparison is finally made with a detector based on the Mann-Whitney test, which usually is considered to be one of the better nonparametric procedures for the two-sample case.     

Energy Detection of a Random Process in Colored Gaussian Noise

A likelihood receiver for a Gaussian random signal process in colored Gaussian noise is realized with a quadratic form of a finite-duration sample of the input process. Such a receiver may be called a "filtered energy detector." The output statistic is compared with a threshold and if the threshold is exceeded, a signal is said to be present. False alarm and detection probabilities may be estimated if tabulated distributions can be fitted to the actual distributions of the test statistic which are unknown. Gamma distributions were fitted to the conditional probability densities of the output statistic by equating means and variances, formulas for which are derived assuming a large observation interval. A numerical example is given for the case in which the noise and signal processes have spectral densities of the same shape or are flat. The optimum filter turns out to be a band-limited noise whitener. The factors governing false alarm and detection probabilities are the filter bandwidth, the sample duration, and the signal level compared to the noise. Two sets of receiver operating characteristic curves are presented to complete the example.     

Data Quantization for Narrowband Signal Detection

In automatic radar detection, digital integration of the envelope detector outputs is often used as a good approximation to the optimum. This requires quantizing the envelope detector outputs. In this paper, quantizer structures for narrowband signal detection are considered. Quantizer characteristics are derived to optimize performance as measured by the detector efficacy?an asymptotic performance measure. Asymptotic and finite sample performance results are presented. The results obtained are not limited in their application to Gaussian noise only, although this important case is given specific consideration.     

CFAR detection and estimation for STAP radar

The algorithm presented here provides both a constant false-alarm rate (CFAR) detection and a maximum likelihood (ML) Doppler-bearing estimator of a target in a background of unknown Gaussian noise. A target is detected, and its parameters estimated within each range gate by evaluating a statistical test for each Doppler-angle cell and by selecting the cell with maximum output and finally comparing it with a threshold. Its CFAR performance is analyzed by the use of the sample matrix inversion (SMI) method and is evaluated in the cases of a fully adaptive space-time adaptive processing (STAP) and two partially adaptive STAPs. The performances of these criteria show that the probability of detection is a function only of the sample size K used to estimate the covariance matrix and a generalized signal-to-noise ratio. The choice of the number K is a tradeoff between performance and computational complexity. The performance curves demonstrate that the finer the resolution is, the poorer the detection capability. That means that one can trade off the accuracy of ML estimation with the performance of the CFAR detection criterion     

Optimum Realizable Continuous Range Estimation

The ability to detect the presence or absence of a target is no longer the fundamental design criterion when the vehicle to be tracked is cooperative. In spacecraft tracking or navigation systems, for example, emphasis is placed on post-acquisition performance. Therefore, classical radar theory and design techniques are not specifically applicable. On the other hand, there are optimization techniques for extracting the tracking data from noise that are more to the point. In particular, optimum demodulation theory is directed specifically to the problem of continuously extracting data from a nonlinear modulation process. In this paper, the tracking properties of a multitone PM ranging signal are reviewed and are shown to be nearly optimum for cooperative vehicles. An optimum, but nonrealizable, maximum a posteriori (MAP) continuous estimator of range is derived for this signal. The linearized model of this receiver is the optimum nonrealizable Wiener filter for the data. Interpretation of this optimum nonrealizable estimator leads to a receiver design that is both practical and intuitively satisfying. With the aid of post-detection processing in the Wiener-Hopf sense, almost optimum performance is obtained from the resulting receiver, above threshold.     

A Suboptimum Rank Test for Nonparametric Radar Detection

The optimum rank detector structure, in the Neyman-Pearson sense and under Gaussian noise conditions, is approximated by a suboptimum structure that depends on an adjustable parameter. This new rank detector, which operates on radar video signal, includes other well-known detectors as particular cases. The asymptotic relative efficiency (ARE) of the proposed rank detector is computed, with its maximum value the ARE of the locally optimum rank detector (LORD). The detection probability versus signal-to-noise ratio, and the effects of interfering targets are also calculated by Monte-Carlo simulations for different parameter values.     

Optimum array detector for a weak signal in unknown noise

We study the design of constant false-alarm rate (CFAR) tests for detecting a rank-one signal in the presence of background Gaussian noise with unknown spatial covariance. We look at invariant tests, i.e., those tests whose performance is independent of the nuisance parameters, like the background noise covariance. Such tests are shown to have the desirable CFAR property. We characterize the class of all such tests by showing that any invariant decision statistic can be written as a function of two basic statistics which are in fact the adaptive matched filter (AMF) statistic and Kelly's generalized likelihood ratio statistic. Further, we establish an optimum test in the limit of low signal-to-noise ratio (SNR), the locally most powerful invariant (LMPI) test. We also derive the bound for the probability of detection of any invariant detector, at a fixed false-alarm rate, and compare the LMPI and the published detectors (Kelly and AMF) to it     

Coherent detection in Laplace noise

The discrete-time detection of a time-varying, additive signal in independent Laplace noise is considered. Previous efforts in this area have been restricted to the constant signal, and identically distributed noise case. Theoretical (closed form) expressions for the false alarm and detection probabilities are developed for both the Neyman-Pearson optimal detector and the classical matched filter detector. Comparisons between the two detectors are made which illustrate the effects of signal-to-noise power ratio and sample size for certain false alarm and detection probability constraints. In view of the fact that the optimal Laplace detector is not UMP, we also investigate the effect of signal amplitude mismatch     

Numerical Results on the Convergence of Relative Efficiencies

This paper considers the detection of a known constant signal in an additive non-Gaussian noise under the assumptions of discrete time and statistically independent noise samples. The objective is to determine how large sample size must be before the easily computed asymptotic relative efficiency becomes a valid measure of performance. The exact small-sample error probabilities are calculated for a Neyman-Pearson optimal nonlinear detector consisting of a zeromemory nonlinearity followed by summation and threshold comparison. "Large-tailed" noise having a double exponential distribution is used as an example. The exact distribution of the test statistics for a linear detector and for the Neyman-Pearson optimal detector are calculated. Then the relative efficiency of the Neyman-Pearson optimal detector, as compared to a linear detector, is computed in order to study the rate of approach of the relative efficiency to its asymptotic value.     

Effects of Band Limiting on the Detection of Binary Signals

PCM/NRZ systems operating in the presenceof noise and in a band-limited channel areconsidered. Two types of bit detectors arestudied, integrate and dump, and sample. Theincreased signal power needed to give thesame performance as an optimum detectorand a broad-band channel is computed. Theresults depend on the bit pattern. The averageeffect of band-limiting over all bit patternsand two extreme cases are plotted for eachdetector. The results show that integrate anddump is always superior to sample and that ifthe sample detector is used, one should bandlimit before sampling at a frequency of 0.6times the bit rate.     

Suppression of Weibull-Distributed Clutters Using a Cell-Averaging LOG/CFAR Receiver

The parameters of the Weibull distribution and the threshold level for an adaptive CFAR detector are determined by calculating the mean value and the mean-squared value of the input signal voltage before it passes through a logarithmic amplifier. By using this threshold level an adaptive method for suppressing various VVeibull-distributed clutters is proposed.     

On detection using filter banks and higher order statistics

We suggest a method, based on the use of filter bank and higher order statistics (cumulants), for detection of transient signals. The method first uses a bandpass filter bank, which separates the spectrum of the observed signal into narrow frequency bands. Each subfilter of the filter bank is then followed by a cumulant estimator, and thereby suppressing colored noise. By selecting those subfilters that have large output energies, the filter bank can approximate the behavior of a matched filter. Moreover, no a priori information about the waveform of the signal is needed. The performance of the detector is evaluated by using a simulated signal as well as a measured signal. The presented detector is compared with the optimal matched filter detector.     

Hough transform for long chirp detection

The online detection of a very long and weak chirp signal is studied. The signal has an extremely slowly decreasing frequency, and is corrupted by white Gaussian noise and possibly also by powerful tones. By exploring and comparing candidate methods, it is found that the Hough transform (HT) detector appears to be most suitable given constraints on computational load and detectability. The analytical and the simulational performance of the HT detector are obtained and compared with the analytical performance of the generalized likelihood ratio test (GLRT), which is assumed to be optimal. Applying a suitable threshold for the HT can increase speed dramatically while preserving performance. We have found that both dithering (taking varied frequency shifts for fast Fourier transforms (FFTs)) and increasing the FFT length can reduce the minimum detectable frequency slope with nearly no additional computation     

Robust detection of small stochastic signals

We consider the problem of detecting a stochastic signal in white not-necessarily-Gaussian noise, using vector valued observations. The locally optimal detector is presented and its performance evaluated. The least-favorable signal spectrum and noise density (over specified classes) are found, and it is shown that the detector using these least-favorable assumptions is minimax robust. The class of spectra is that of any stochastic signal of specified power whose spectrum can be bounded from above and from below by two given positive functions. The class of densities is the ε-contamination model. We present examples of the performance achievable with the robust detector in one of these the spectral uncertainty class corresponds to the unknown Doppler shift of a radar return signal. It is demonstrated that the standard matched-filter's performance degradation with increasing Doppler shift can be avoided almost entirely through use of the robust processor     

A mean level adaptive detector using nonconcurrent data

Convergence results for a mean level adaptive detector (MLAD) are presented. The MLAD consists of an adaptive matched filter (for spatially correlated inputs) followed by a mean level detector (MLD). The optimal weights of the adaptive matched filter are estimated from one batch of data and applied to a statistically independent batch of nonconcurrent data. The threshold of the MLD is determined from the resultant data. Thereafter a candidate cell is compared against this threshold. Probabilities of false alarm and detection are derived as a function of the threshold factor, the order of the matched filter, the number of independent samples per channel used to calculate the adaptive matched filter weights, the number of samples used to set the MLD threshold, and the output signal-to-noise power ratio of the optimal matched filter. A number of performance curves are shown and discussed     

高斯噪声中非高斯弱信号的双谱检测

传统的能量检测在接收信号为高斯分布下最优,其检测性能最终取决于信噪比。当信噪比下降时,检测性能必然恶化,而且这种恶化是不可避免的和难以改善的。为了改善弱信号的检测性能,本文同时利用了信号的三阶和二阶统计量构造一种双通道信号检测器,在强高斯噪声的背景下,只要弱信号蕴含有足够多的双谱信息,其检测性能将远远超过基于传统的能量检测器的性能。