Poly-phase codes and optimal filters for multiple user ranging

A technique is introduced to select poly-phase codes and optimal filters of a pulse compression system that have specific temporal and frequency characteristics. In the particular problem under study, multiple vehicles are assigned unique codes and receiver filters that have nearly orthogonal signatures. Narrowband users, that act as interference, are also present within the system. A code selection algorithm is used to select codes which have low autocorrelation sidelobes and low cross correlation peaks. Optimal mismatched filters are designed for these codes which minimize the peak values in the autocorrelation and the cross correlation functions. An adjustment to the filter design technique produces filters with nulls in their frequency response, in addition to having low correlation peaks. The method produces good codes and filters for a four-user system with length 34 four-phase codes. There is considerable improvement in cross and autocorrelation sidelobe levels over the matched filter case with only a slight decrease in the signal-to-noise ratio (SNR) of the system. The mismatched filter design also allows the design of frequency nulls at any frequency with arbitrary null attenuation, null width, and sidelobe level, at the cost of a slight decrease in processing gain     

Frequency hop multiple access codes based upon the theory of cubiccongruences

The need for families of frequency-hop codes which have mutually small auto-ambiguity and cross-ambiguity functions is discussed. Current coding methods are reviewed. A new family of frequency-hop codes based upon the number-theoretic concept of cubic congruences is introduced. It is shown that for about 50% of the prime numbers, families of full codes exist which have at most two coincidences for any time-frequency shift in their auto-ambiguity functions and at most three coincidences in the set of mutual cross-ambiguity functions     

Time-frequency hop codes based upon extended quadratic congruences

Time-frequency hop codes are developed that can be used for coherent multiuser echolocation and asynchronous spread spectrum communication systems. They represent a compromise between Costas codes, which have nearly ideal autoambiguity but not so good cross-ambiguity properties, and linear congruential codes, which have nearly ideal cross-ambiguity but unattractive autoambiguity properties. Extended quadratic congruential code words are shown to have reasonably good autoambiguity and cross-ambiguity properties across the whole class of code sets considered. A uniform upper bound is placed on the entire cross-ambiguity function surface, and bounds are placed on the position and amplitude of spurious peaks in the autoambiguity function. These bounds depend on the time/bandwidth product and code length exclusively and lead naturally to a discussion of the design tradeoffs for these two parameters. Examples of typical autoambiguity and cross-ambiguity functions are given to illustrate the performance of the new codes     

Multidimensional particle codes: Their capabilities and limitations

Increasing the number of dimensions calls for significant changes in simulation techniques. Demand on computer time and space increases by orders of magnitude and hardware development affects the feasibility. Gridless and Fokker-Planck codes are possible in ID, but one needs grids and PIC codes in 2D and 3D. This imposes limits on Debye lengths, particle size and spacing, and on resolution. Non-spectral (local) E-M codes also suffer a Courant restriction on δt, in addition to the usual ω_p δt restriction. Spectral methods therefore have an advantage; they also permit convenient filtering, particle shaping and control of resolution. 2D and codes are well advanced and documented (4,5). 3D codes are in their infancy. Data management, rather than physics or numerical analysis, becomes the major problem (10). Machine-independent 3D codes are too limited in resolution and speed. Parallelism helps greatly but makes the 3D codes machine-dependent. A present-day limit is attempted in a 2*128**3 grid code for CRAYs which process ∼ 5 million particles in ∼ 2 minutes per time step. Layering is employed to break up the 3D problem into many 2D problems. Fields and particles are packed and buffered in and out of core. Diagnostics are limited by the large volume of information accumulated in a run. Results of runs with 3D codes have tended to show that the third dimension, treated as “ignorable” in 2D simulations, should not have been ignored. With the next generation of highly parallel multiprocessors (which, however, call for the abandonment of spectral and implicit methods) one may hope to do very realistic 3D simulations.     

A New Class of Polyphase Pulse Compression Codes and Techniques

A new class of symmetric radar pulse compression polyphase codes is introduced which is compatible with digital signal processing. These codes share many of the useful properties of the Frank polyphase code. In contrast with the Frank code, the new codes are not subject to mainlobe to sidelobe ratio degradation caused by bandlimiting prior to sampling and digital pulse compression. It is shown that bandlimiting the new codes prior to pulse compression acts as a waveform amplitude weighting which has the effect of increasing the mainlobe to sidelobe ratios.     

Hybrid simulation codes with application to shocks and upstream waves

Hybrid codes in which part of the plasma is represented as particles and the rest as a fluid are discussed. In the past few years such codes with particle ions and massless, fluid electrons have been applied to space plasmas, especially to collisionless shocks. All of these simulation codes are one-dimensional and similar in structure, except for how the field equations are solved. We describe in detail the various approaches that are used (resistive Ohm's law, predictor-corrector, Hamiltonian) and compare results from the various codes with examples taken from collisionless shocks and low frequency wave phenomena upstream of shocks.     

跨音速三维多升力面气动设计

发展了一种跨音速多升力面的气动设计方法和设计程序,它基于已成功应用于亚、跨音速机翼设计和亚音速双翼面设计的"余量修正迭代"概念.当升力面上出现超音速区和激波时自动引用迎风格式对控制方程进行修正.开发了一系列接口程序,包括目标压力设计程序.由此气动设计程羊、TAU程序以及相应的接口程序建立了跨音速多升力面气动反设计软件系统.用两个鸭翼-机翼构型验证了设计方法和设计程序,结果表明在高跨音速下设计迭代有很好的收敛性.     

互补编码导航信号的一种设计方法

本文叙述了互补编码导航信号的一种设计方法。证明了按此法构成的编码可保证时分多台导航系统在信号搜索过程中能自动识别主、副台,在信号跟踪过程中能抑制多次反射天波对地波的干扰。并给出了编码实例。     

Generalized Feedback Decoding of Convolutional Codes

The use of convolutional codes with feedback decoding is a common error-correction technique in simple communication systems. A drawback of conventional feedback decoding is the limitation to a class of self-orthogonal codes which, in general, are nonoptimum. Based on distance properties of the utilized code and test-error pattern analysis, we propose generalized feedback decoding which does not have the abovementioned limitation. This is minimum distance decoding and can be applied to any convolutional code while still maintaining its simplicity. Therefore, it has the advantage of being easily adopted in existing systems. We can use the relatively complicated Viterbi or sequential decoders in larger terminals and, with the same code, use the proposed decoders in smaller terminals; otherwise, both large and small terminals must utilize the same type of decoder. The proposed decoding scheme could also be used to simplify and speed up sequential decoding. In addition, comparisons of the proposed decoder with other feedback decoders are presented.     

Range-time-sidelobe reduction technique for FM-derived polyphase PCcodes

A simple, easy to implement technique is presented that can significantly reduce the range-time-sidelobes of a class of polyphase pulse compression codes. This technique reduces the highest sidelobes to only one code element magnitude independent of effective pulse compression ratio. The codes considered are polyphase codes that are derived from the step-approximation-to-linear-frequency-modulation and linear-frequency-modulation waveforms such as the P1, P3, P4, and the Frank codes. The characteristics of these codes that make this possible are explained     

Code networking for multi-disciplinary analysis of rotor phenomena

The prediction of rotor phenomena requires the concurrency of several disciplines, from aeroelasticity to structural dynamics, from aerodynamics to aeroacoustics. Within each discipline a number of specialist codes have been developed; they are focused on the aspects of the global phenomenology which are best treated by that discipline while approximations are made for the concurrent disciplines. The Brite/EuRam ROSAA project aimed at the development of an integrated system where specialist codes can be connected so that the exchange of data among codes provides the best knowledge from each discipline for an improved prediction.     

Cross-layer design of LT codes and LDPC codes for satellite multimedia broadcast/multicast services

According to large coverage of satellites, there are various channel states in a satellite broadcasting network. In order to introduce an efficient rateless transmission method to satellite multimedia broadcasting/multicast services with finite-length packets, a cross-layer packet transmission method is proposed with Luby transform （LT） codes for efficiency in the network layer and low density parity check （LDPC） codes for reliability in the physical layer jointly. The codewords generated from an LT encoder are divided into finite-length packets, which are encoded by an LDPC encoder subsequently. Based on noise and fading effects of satellite channels, the LT packets received from an LDPC decoder either have no error or are marked as erased, which can be mod- eled as a binary erasure channels （BECs）. By theoretical analysis on LT parameters and LDPC parameters, the relationships between LDPC code rates in the physical layer and LT codes word lengths in the network layer are investigated. With tradeoffs between the LT codes word lengths and the LDPC code rates, optimized cross-layer solutions are achieved with a binary search algorithm. Verified by simulations, the proposed solution for cross-layer parameters design can provide the best transmission mode according to satellite states, so as to improve throughput performance for satellite multimedia transmission.     

Sets of One and Higher Dimensional Welti Codes and Complementary Codes

A Welti code is a binary sequence with an impulse-like autocorrelation function. A set of such codes may possess vanishing cross-correlation functions. The elements of Welti codes must be members of a set of at least two orthogonal vectors or subcodes. First, methods for synthesizing sets of one-dimensional Welti codes with vanishing cross-correlation functions, and conditions upon their existence are discussed. Then, construction methods of sets of two and higher dimensional Welti codes are presented. Based on these constructions, further sets of mutually orthogonal complementary codes in one or more dimensions can be derived. The use of such signals relates to various topics such as communication, radar and navigation systems, measuring and identification in one or higher dimensional systems, synchronization and spatial alignment, or coded aperture imaging.     

线性分组码限距离译码器的性能分析

为了提高自动重传请求(ARQ)系统的通过率,在混合ARQ系统中,使用限距离译码器改善系统的性能。在限距离译码时,线性分组码纠正重量t的错误图样。纯纠错译码器和纯检错译码器都是限距离译码器的特例。本文首先介绍了Krautchouk多项式的几个重要性质,然后,用线性分组码及其对偶码的重量分布,分别导出了两种形式的错误译码概率的简化计算公式。由于生成函数方法的使用,成功地得到了重复码、汉明码和扩展汉明码的错误译码概率的解析公式,最后,讨论了Golay码和某些本原BCH码错误译码概率的计算方法。     

GF(q)域上的低密度校验(LDPC)码的译码及其在深空通信中的应用

低密度校验码是一类能有效逼近香农限的好码,而高进制的LDPC码具有比二进制LDPC码更好的性能,但其译码复杂度太高不利于工程应用。本文提出了一种基于协同优化算法的低复杂度的高进制LDPC码的译码算法,并讨论了其在深空通信中的应用。     

Turbo乘积码编译码算法研究

介绍了基于Chase算法[1,3]的Turbo乘积码软入软出(SISO)迭代译码算法。对Turbo乘积码在加性高斯白噪声(AWGN)信道下的性能进行了仿真和分析,结果表明:Turbo乘积码译码复杂度较低,在编码效率较高时,仍具很好的译码性能。     

Ambiguity properties of quadratic congruential coding

The ambiguity characteristics of multiple access frequency hop codes based on standard quadratic congruences are investigated in the light of results obtained for codes based on Costas arrays and extended quadratic congruences. While the autoambiguity properties are found to be very similar to those of Costa codes, i.e. nearly ideal, the cross-ambiguity properties of quadratic congruential codes are much better. These results are valid across the whole class of code sets considered, but they are obtained at some expense in the pulse compression characteristics of the codes. A uniform upper bound is placed on the entire cross-ambiguity function surface, and bounds are placed on the amplitude of spurious peaks in the autoambiguity function. These bounds depend on the time-bandwidth product and code length exclusively and lead naturally to a discussion of the design tradeoffs for these two parameters. Examples of typical autoambiguity and cross-ambiguity functions are given to illustrate the performance of quadratic congruential coding with respect to Costas coding     

Cross-Correlation Interference Effects in Multiaccess Optical Communications

The effects of the cross correlation between user codes in an opticalcode-division multiple-access communication system are investigated. The system model is a multiaccess satellite repeater in which the uplink and downlink channels are direct-detection, optical-polarization modulation links. The error probability is derived in terms of the cross correlation between the intended and interfering user codes. It is shown that the system error rate can be minimized by using code sequences in which the normalized second moment of the cross correlation between codes is small. The signalto- noise ratio (SNR) on the uplink is shown to be proportional to 1/K while the SNR on the downlink is proportional to 1/K1/2, where K is the number of users which are simultaneously accessing the system.     

机翼设计软件的完善及商用化研究

在对原有的机翼设计软件进一步完善的基础上,开发了基于Windows操作系统的设计软件工程包;通过图形用户界面实现了设计过程的菜单式选择和设计变量的模块化输入;开发了设计过程中目标压力分布的可视化修改模块,设计过程的实时显示模块,及与其它图形绘制软件的接口;提高了软件的可视化程度,使原有的机翼设计软件的商用性得到了很大的提高,探讨了国产CFD软件商用化的可行性。     

Doppler Properties of Polyphase Coded Pulse Compression Waveforms

Doppler properties of the Frank polyphase code and the recently derived P1, P2, P3, and P4 polyphase codes are investigated and compared. An approximate 4 dB cyclic variation of the peak compressed signal is shown to occur as the Doppler frequency increases. The troughs in the peak-signal response occur whenever the total phase shift across the uncompressed pulse, due to Doppler, is an odd multiple of ? radians. It is shown that while the P3 and P4 codes have larger zero-Doppler peak sidelobes than the other codes, the P3 and P4 codes degrade less as the Doppler frequency increases. Also, the effects of amplitude weighting and receiver bandlimiting for both zero and nonzero Doppler are investigated.