共查询到20条相似文献,搜索用时 62 毫秒
2.
3.
4.
7-氨基-6-硝基-4,5-二氧化呋咱的热分解特性 总被引:3,自引:2,他引:3
利用差示扫描量热法(DSC)、热失重法(TG)和傅里叶变换红外光谱法(FTIR)研究了7 氨基 6 硝基 4,5 二氧化呋咱(CL 18)的热分解性能。结果发现CL 18在分解之前无熔融转变,属于固态分解。在低升温速率下整个反应分两步进行,首先是不稳定的硝基和一个呋咱环的自由基分解,然后是相对较稳定的苯并氧化呋咱环的受热分解,两步反应的活化能分别为167 68kJ/mol和204 55kJ/mol,分解产物二氧化氮在整个分解过程中都起着氧化和催化作用。在高升温速率下仅仅表现为一步放热反应。最终固态分解产物主要为碳,其中含有少量氮、氢等。 相似文献
5.
6.
机翼-机身-短舱-挂架外形气动优化设计方法 总被引:6,自引:2,他引:4
采用基于径向基函数的无限插值方法进行了复杂外形的动网格生成,并针对其存在的可能导致壁面附近出现负体积与网格质量下降的问题,提出对不与物面直接相连的边的位移采用径向基函数插值,对与物面相连的边的位移进行线性插值获得位移量的方法解决该问题.采用无限插值方法建立了一种简单有效的物面相贯线处理方法.利用离散共轭方法计算目标函数梯度,对DLR-F6 机翼-机身-短舱-挂架外形的机翼和短舱进行了几何外形参数化与气动外形优化设计.结果表明:考虑短舱安装方式的优化设计较不考虑短舱安装方式的优化设计可降低大约0.0001的阻力系数.通过全机优化设计,将全机阻力系数降低了0.00153. 相似文献
7.
为了更好地改善硝酸铵(AN)的某些性能,以AN为主体,分别添加质量分数为1%,2%和3%的2,3-二羟甲基-2,3-二硝基-1,4-丁二醇四月桂酸酯(BHDBTL)、2,3-二羟甲基-2,3-二硝基-1,4-丁二醇四棕榈酸酯(BHDBTP)和2,3-二羟甲基-2,3-二硝基-1,4-丁二醇四硬脂酸酯(BHDBTS),对改性前后的硝酸铵分别进行了晶变、吸湿性的研究,结果表明当添加剂加入量分别为1%,2%,3%时,BHDBTP,BHDBTS对硝酸铵改性的效果要优于BHDBTL,且当添加剂为BHDBTS,添加量为2%时的改性硝酸铵的效果最佳;进一步对三种添加量为2%的添加剂改性前后的硝酸铵进行了扫描电子显微镜(SEM)测试,发现当添加剂为BHDBTS,改性硝酸铵的效果最佳。 相似文献
8.
面向测试性虚拟验证的功能-故障-行为-测试-环境一体化模型 总被引:1,自引:0,他引:1
由于测试性预计和测试性试验验证客观存在的困难及问题,测试性虚拟验证将在测试性工程领域发挥重要作用.根据测试性虚拟验证对模型的需求,针对传统测试性模型存在的定量特征少、导致测试性评估结果不准确等问题,提出一种功能-故障-行为-测试-环境一体化模型.首先,分析并指出该一体化模型由功能、故障、行为、测试、环境5大类要素构成.然后,在数学上对该一体化模型及其子模型进行定义和描述,分析并建立各子模型之间的关联关系.最后以某导弹及其测试系统为案例进行实验和应用研究.结果表明,在建模信息量充足的情况下,基于该一体化模型得到的测试性虚拟试验验证与评估结果较准确,能较好地支持装备测试性摸底、鉴定与验收等. 相似文献
9.
俄罗斯单座卡-50武装直升机刚投入批生产后不久,卡莫夫设计局就提出了它的双座改型方案——卡-52.首架卡-52于1996年11月19日首飞,紧接着卡莫夫又于翌年进行了另一卡-50单座改型卡-50N的首飞.记得当年初露端倪的卡-50,曾以它独特的单驾驶、带弹射救生座椅装置的设计引起众多界内人士的关注和争议,更被各方媒体炒得沸沸扬扬.然而,为什么事隔不久,几乎开创了武装直升机单驾驶设计先河的卡莫夫设计局又推出了它的双座改型呢? 相似文献
10.
马荣%刁训刚%舒远杰 《宇航材料工艺》2008,38(2):21-25
用溶液法在ITO玻璃上依次沉积了稀硫酸掺杂聚苯胺(PANI)膜和聚(2-丙稀酰胺-2-甲基丙磺酸)-聚苯胺共聚物膜,利用SEM和FTIR对两种薄膜的表面形貌及分子链基团结构进行了分析,讨论了薄膜的电导率和电化学性能.结果表明:聚(2-丙稀酰胺-2-甲基丙磺酸)-聚苯胺共聚物膜有较理想的物理化学性能,电化学性稳定,循环100次后,循环伏安曲线变化较小;当PAMPS-PANI膜的厚度为230 nm时,它的电导率可达到0.398 S/cm,室温时电导率可调,是较理想的电磁屏蔽材料. 相似文献
11.
陈永来%李劲风%吕宏军%张宇玮%张绪虎 《宇航材料工艺》2007,37(6):44-49
在Gleeble~1500热模拟实验机上,采用高温等温压缩,应变速率为0.001~10/s,变形温度为360~520%,对通用型铝锂合金在高温压缩变形中的流变应力行为进行了研究,分析了其高温变形的物理本质。结果表明:在等应变速率下,真应力随温度的升高而降低;在相同的变形温度下,随应变速率的增加,流变应力水平升高。在较低的变形速率及较高的变形温度条件下热变形时,通用型铝锂合金容易发生动态再结晶。而变形速率较高,变形温度较低时,通用型铝锂合金可能发生剪切变形,热变形过程中则主要发生动态回复。 相似文献
12.
13.
Closed-form expressions are derived for the output noise response of an ?-?-? filter in steady-state operation with constant measurement noise statistics. To the author's knowledge such expressions have been unavailable until now. These formulas are useful for target tracking applications. 相似文献
14.
16.
17.
高温导管连接快卸卡箍技术性能要求较高,制造工艺较复杂。本文介绍应用橡胶胀形新工艺.解决弹性凸缘、卡圈两个关键件的成形难题,用此工艺生产的卡箍试验件,通过多项性能试验证明,具有较高的可靠性。 相似文献
18.
We computed the evolution through case A mass transfer for 8 systems with mass of the primary equal to 3 and 5 M0, mass ratios 0.7 and 0.9, and different periods. To this we added similar results from Packet (1988) for Mi = 9 M0, qi = 0.6, Pi = 1.62 d.During the mass transfer two competing mechanisms in the gainer decide on the evolution of the system: the rejuvenation of this star as the increasing convective core mixes fresh hydrogen into the inner regions, and the acceleration of nuclear burning, responding to the increasing mass.In all the cases the net result is a faster decrease of the central hydrogen content compared to the mass losing star. The secondary fills its own critical Roche lobe and reversed mass transfer starts.From our results and those of Nakamura and Nakamura (1984), we find that reversed mass transfer occurs after core hydrogen burning of the secondary (case A1B2) approximately for periods larger than 1 d (M1i = 3 M0) to 2 d (M1i = 13.4 M0). For smaller periods this happens before the gainer ends its core hydrogen burning (case A1A2). 相似文献
19.
MJS-8型30秒计时器,采用8051单片机,利用可编程通用,键盘和显示器接口器件8279来完成整个系统。本文主要介绍软件部分的设计。 相似文献
20.
In part I (De Greve and Packet) we have investigated the occurrence of reversed phases of mass-transfer during Case A evolution in close binaries. If the initial period of a system is shorter than 1–2 days (Early Case A) the reversed phase starts before core hydrogen exhaustion of the gainer (part I). This type of evolution is characterized by at least two phases of slow mass-transfer.We have computed the evolution of four Early Case A systems with initial masses of the loser equal to 3 Mo and 5 Mo. These four systems start mass-exchange when Xc of the primary has decreased to 0.525 (75% of its initial value). They all experience two phases of slow mass-transfer.We find that both phases have about the same duration for all systems. The mass ratios are clearly distinct, being closer to unity during the first phase. In the Hertzsprung-Russell, mass-radius and mass-luminosity diagrams both components remain close to the main-sequence band during slow mass-transfer. Evolution as an Algol is ended when both components overflow their outer critical surface after a second reversal of the mass-transfer.Observed Algol systems evolving in Early Case A are scarce. A search thruogh the catalogue by Giuricin et al. gives us the following candidates: X Tri, SX Aur and V Pup. Based on their mass ratios, SX Aur can tentatively be assigned to the first phase of slow mass transfer and X Tri to the second phase. For V Pup (which is more massive) this choice can not be made with certainty. 相似文献