Optimum gain control for A/D conversion using digitized I/Q data inquadrature sampling

Calculation of optimum gain for minimum distortion due to A/D (analog-to-digital) conversion requires the estimation of the input signal strength. To use a common AGC (automatic gain control) for both the I/Q (in-phase and quadrature) signals, it is efficient to estimate the input signal strength using the quantized A/D output from both channels. Assuming a Gaussian input, the relationship between σ of the input of the A/D converter and E(|x|+|y|) and E(max(|x|,|y|)+1/2 min (|x|,|y|)) for t quantized I/Q output x and y is derived. Numerical results obtained using the derived expression and the statistical data obtained through simulation show excellent agreement. It is concluded that, because of its simplicity, the cubic equation obtained by fitting the numerical results should be useful     

On the uniform sampling of a sinusoidal signal

It is generally accepted that a monochromatic signal such as sin 2πWt (W>0) must be sampled at a uniform rate greater than the ostensible Nyquist rate of 2W samples per to effect a reconstruction of the signal. It is shown that a sinusoid of frequency W Hz is completely determined by its samples taken at the uniform rate of 2r samples per second, where r>0 is arbitrary subject only to the restriction that W ≠kr for any positive integer k. In particular, a pure sinusoid may be sampled uniformly without loss of information at arbitrarily small rates     

Identification of rational transfer function from frequencyresponse sample

A method for identifying a transfer function, H(z)=A(z)/B(z), from its frequency response values is presented. Identifying the transfer function involves determining the unknown degrees and coefficients of the polynomials A(z) and B( z), given the frequency response samples. The method for finding the parameters of the transfer function involves solving linear simultaneous equations only. An important aspect of the method is the decoupled manner in which the polynomials A(z) and B(z) are determined. The author presents two slightly different derivations of the linear equations involved, one based on the properties of divided differences and the other using Vandermonde matrices or, equivalently, Lagrange interpolation. A matrix synthesized from the given frequency response samples is shown to have a rank equal to the number of poles in the system     

Finding the best set of K paths through a trellis withapplication to multitarget tracking

A solution is presented to the problem of finding the best set of K completely unmerged paths through a trellis with M _i⩾K states at depth i in the trellis, i=0, 1, 2, . . ., N. Here, `best set' means that the sum of the metrics of all K paths in the set is minimized, and `completely unmerged' means that no two paths pass through a common state. The solution involves using the Viterbi algorithm on an expanded trellis. This result is then used to separate the tracks of K targets optimally in a simplified model of a multitarget radar system. The model includes measurement errors and false alarms, but it does not include the effects of missing detections or merged measurements     

Buck-flyback DC-DC converter

It is difficult to obtain a large input/output voltage ratio with a DC-DC converter, because the duty factor d may not reach very small values. For the same reason, it is difficult to obtain an output voltage that is adjustable in a large range. A DC-DC converter circuit is proposed that overcomes this limitation by performing a voltage ratio d²/(1-d) in the best operating mode. Circuit operation is analyzed, operating modes are evidenced, and the voltage ratio is deduced in each operating mode as a function of output current, duty factor, and circuit component values. Boundary conditions between different operating modes are obtained; consequently, it is concluded that these conditions do not occur for some operating modes. Component ratings are summarized, to facilitate circuit design. The buck-flyback DC-DC converter is very suitable for low-voltage (e.g. computer) power supplies and for power supplies with the output voltage (adjustable in a large range) supplied from the mains without a mains voltage transformer     

Systolic array implementation of second-order Kalman filter

The approach for design of parallel implementation of the second-order Kalman filter using systolic array processors is proposed. The original time complexity of more than 27n³ for sequential processing can be reduced to only 21n+10r-4 in the proposed parallel implementation. The improvement is gained from the utilization of interarray pipelining, concurrent processing and substitution forwarding techniques. The approach is especially suitable for real-time application of the Kalman filter in solving second-order linear system     

SAR resolution in the presence of phase errors

The author analyzes the effects of phase errors on synthetic aperture radar (SAR). The theory is applied to the following question: how does the achievable resolution vary with the carrier frequency when optimum quadratic focus and/or optimum processing interval (synthetic aperture length) are used? Numerous related results are given, so that much of the material is tutorial. For phase errors corresponding to uncompensated motion, the best achievable RMS resolution with any phase error spectrum satisfies the derived equation. For motion-induced phase errors it is seen that resolution improves with increasing carrier frequency when the first term in the expression applies (e.g. for phase errors concentrated at low frequencies) and resolution is independent of carrier frequency when R δ/v/v is the smaller term (e.g. with broad band or high frequency phase errors)     

The autocorrelation of m-sequences over nonprime finitefields

Nonbinary m-sequences (maximal length sequences) for spread-spectrum communication systems that have a two-level autocorrelation are presented. The autocorrelation function of an m -sequence over the Galois field of q elements GF(q), where q=p^k, for p a prime and k an integer greater than 1, is developed and shown to be bilevel when the elements of GF(q) are expressed as elements of a vector space over the pth roots of unity     

Efficient algorithms for finding the K best paths througha trellis

A set of algorithms is presented for finding the best set of K mutually exclusive paths through a trellis of N nodes, with worst-case computation time bounded by N³log n for a fixed-precision computation. The algorithms are based on a transformation of the K-path trellis problem into an equivalent minimum-cost network flow (MCNF) problem. The approach allows the application of efficient MCNF algorithms, which can obtain optimal solutions orders of magnitude faster than the algorithm proposed by J.K. Wolf et al. (1989). The resulting algorithms extend the practicality of the trellis formulation (in terms of required computations) to multiobject tracking problems with much larger numbers of targets and false alarms. A response by Wolf et al. is included     

Transient processes and stability in an LC chopper

The analysis of the transient and steady-state processes in LC choppers is presented. The method, used previously for the analysis of processes in grid-connected and self-commutated converters, is adjusted for analysis of LC chopper's processes. The difference equations describing these processes, are obtained and solved. The analytical solution of the problem and the conditions of the transient, steady-state, and stability existence in the chopper are found. Theoretical and experimental results are compared and satisfactory agreement is obtained     

Continuous-time ECV and ECA track filters with colored measurementnoise

Analytical solutions are presented for two continuous-time track filters with correlation in both the measurement errors and the target maneuvers. The measurement error model is a first-order Markov process, characterized by a correlation time (γ) and a position error variance (r). The target motion is described by one of two dynamic models: the exponentially correlated velocity (ECV) model, and the exponentially correlated acceleration (ECA) model. For both models, the steady-state velocity variance exhibits resonant behavior. The analytical solutions include as special cases several previously published results     

Multiple target tracking using products of position measurements

The continued development of the symmetric measurement equation (SME) filter for track maintenance in multiple target tracking (MTT) is considered, focusing on the case in which the SMEs are generated by forming sums of products of the original position measurements. The SME filter is developed for the case of N targets whose motions consist of random perturbations about constant-velocity trajectories. It is assumed that measurements of x-coordinate positions are available, and that the number of measurements is equal to the number of targets. Various analytical properties of the SME filter are studied. It is shown that under a very weak condition, the estimation error equation is locally exponentially stable. The performance of the SME filter is investigated by comparing it with an optimal (minimum-variance) estimator and by generating a computer simulation in the six-target case     

Nonparametric rank detectors on quantized radar video signals

Uniform randomization of ties is required for defining distribution-free ranks of independent and identically distributed quantized samples. Formulas of rank probabilities are given and applied to radar detection under quantized video samples. For some detectors, and assuming Gaussian noise, the asymptotic loss L_∞(q) is calculated versus the normalized quantization step q, and the loss L(q) is estimated by Monte Carlo simulations. Both of these resulted in monotonic functions of q (0<q<1.1) that are independent of the other parameters. Furthermore, L(q)≈L_∞(q )⩽0.45 dB, as q<0.8. The quantization step q is normalized with respect to the noise standard deviation     

CCRS C/X-airborne synthetic aperture radar: An Rand D tool for the ERS-1 time frame

The airborne synthetic-aperture radar (SAR) system developed for the Canada Centre for Remote Sensing (CCRS) is described. It consists of two radars, at C-band and X-band. Each radar incorporates the following features: dual-channel receivers and dual-polarized antennas; a high quality, 7-look, real-time processor; a sensitivity time control for range-dependent gain control; a motion-compensation system for antenna steering in azimuth and elevation; and baseband I and Q signal phase rotation. The system also uses a high-power transmitter with a low-power back-up. The SAR maps to either side of the aircraft, at high or low resolution, at incidence angles which in high resolution span 0° to 80°. Radar operating parameters, data products, key specifications and the motion compensation scheme used are presented. Properties of the real-time imagery are discussed and examples of C-band SAR data in the three operating modes are given     

Target tracking in maneuver-centered coordinates

Aircraft targets normally maneuver on circular paths, which has led to tracking filters based on circular turns. A coordinate system to track circular maneuvers with a simple Kalman filter is introduced. This system is a polar coordinate system located at the center of the maneuver. It leads to a tracking filter with range, angle, and angular velocity in the state vector. Simulation results are presented, showing that the algorithm displays improved performance over methods based on constant x-y acceleration when tracking circular turns     

A parallel square-root algorithm for modified extended Kalmanfilter

A parallel square-root algorithm and its systolic array implementation are proposed for performing modified extended Kalman filtering (MEKF). The proposed parallel square-root algorithm is designed based on the singular value decomposition (SVD) and the Faddeev algorithm, and a very large scale integration (VLSI) systolic array architecture is developed for its implementation. Compared to other square root Kalman filtering algorithms, the proposed method is more numerically stable. The VLSI architecture described has good parallel and pipelining characteristics in applying to the MEKF and achieves higher efficiency. For n-dimensional state vector estimations, the proposed architecture consists of O(2n²) processing elements and uses O ((s+17)n) time-steps for a complete iteration at each instant, in contrast to the complexity of O((s+6) n³) time-steps for a sequential implementation, where s≈log n     

Periodic ambiguity function of CW signals with perfect periodicautocorrelation

A periodic ambiguity function (PAF) is discussed which describes the response of a correlation receiver to a CW signal modulated by a periodic waveform, when the reference signal in the receiver is constructed from an integral number N, of periods T, of the transmitted signal. The PAF is a generalization of the periodic autocorrelation function, to the case of non-zero Doppler shift. It is shown that the PAF of N periods is obtained by multiplying the PAF of a single period by the universal function sin(Nπν T)/N sin(πνT), where ν is the Doppler shift, to phase-modulated signals which exhibit perfect periodic autocorrelation when there is no Doppler shift. The PAF of these signals exhibits universal cuts along the delay and Doppler axes. These cuts are functions only of t, N and the number M, the modulation bits in one period     

Detection performance in K-distributed and correlatedRayleigh clutters

Performance prediction for a detection system employing noncoherent integration is carried out for a chi-square family of fluctuating targets in K-distributed clutter plus noise. The detection performance for Swerling 11 targets in the K-distributed clutter plus noise is compared with that in exponentially correlated Rayleigh clutter. The results show that the performance prediction based on N pulses integrated in clutter plus noise using the K-distributed clutter model may be approximately equivalent to that using the exponentially correlated Rayleigh-distributed clutter model     

Multiple target angle tracking using sensor array outputs

The use of the output of an array of sensors to track multiple independently moving targets is reported. The output of each sensor in the array is the sum of signals received from each of the targets. The results of direction-of-arrival estimation by eigenvalue analysis are extended to derive a recursive procedure based on a matrix quadratic equation. The solution of this matrix quadratic equation is used to provide updated target positions. A linear approximation method for estimating the solution of the matrix equation is presented. The algorithm is demonstrated by the simulated tracking of two targets. The main advantage of the algorithm is that a closed-form solution for updating the target angle estimates has been obtained. Also, its application is straightforward, and the data association problem due to uncertainty in the origin of the measurements is avoided. However, it requires the inversion of an N×N as well as other linear operations, so that the computational burden becomes substantial as N becomes very large     

Tracking multitarget in cluttered environment

A method for multitarget tracking and initiating tracking in a cluttered environment is proposed. The algorithm uses a sliding window of length uT (T is the sampling time) to keep the measurement sequence at time k. Instead of solving a large problem, the entire set of targets and measurements is divided into several clusters so that a number of smaller problems are solved independently. When a set of measurements is received, a new set of data-association hypotheses is formed for all the measurements lying in the validation gates within each cluster from time K-u+1 to K. The probability of each track history is computed, and, choosing the largest of these histories, the target measurement is updated with an adaptive state estimator. A covariance-matching technique is used to improve the accuracy of the adaptive state estimator. In several examples, the algorithm successfully tracks targets over a wide range of conditions