首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 484 毫秒
1.
王俊奎  王虎 《航空学报》1991,12(12):598-605
 本文讨论了复合材料圆柱壳体稳定性的复杂性,总结了已经取得的研究成果,并与有关实验进行了比较。重点评述了几何非线性、物理非线性、初始缺陷、横向剪切效应和前屈曲变形状态等因素对失稳性能的影响。对今后的工作给出了建议。  相似文献   

2.
由于RTM/纺织复合材料在物理性能上呈现显著的各向异性,给材料的缺陷检测和评价带来困难,提出了一种用于RTM/纺织复合材料孔隙率的非线性超声检测方法.从非线性理论出发,运用非线性超声的二次谐波非线性系数进行RTM/纺织复合材料孔隙率检测.分析结果表明,二次谐波非线性系数的改变与试块的孔隙率之间存在着良好的线性关系,有助于建立RTM/纺织复合材料孔隙率的超声检测模型.  相似文献   

3.
以无穷长的复合材料层合曲板受阶跃均布侧压作用的非线性动力稳定性问题为研究内容,侧重分析了剪力效应以及不同铺层方向的各向异性效应对动临界载荷参数的影响。指出:①对于抗剪能力较弱的复合材料曲板,横向剪力的影响将显著降低临界载菏的值,因而不能忽略它的效应,否则,所得到的临界值将毫无意义;②纤维的方向对临界载荷的影响非常大,不同的铺层方向可能导致临界载荷参数值相差数倍。  相似文献   

4.
针对缠绕复合材料壳体在内压作用下的破坏问题,基于连续损伤介质力学方法,建立了一种缠绕复合材料渐进损伤破坏分析模型。模型中考虑了纤维破坏、基体损伤和纤维/基体开裂3种破坏模式,并针对缠绕复合材料面内剪切非线性的实际,建立了面内剪切非线性模型。通过子程序UMAT将模型嵌入ABAQUS/Standard中,对含缺口缠绕复合材料试件拉伸过程进行了仿真计算,验证了模型的正确性。采用该模型对缠绕复合材料壳体的水压破坏过程进行了仿真分析,结果表明:内压作用下缠绕复合材料的最终破坏是由于纤维断裂导致的,且纤维破坏主要出现在环向层,基体破坏主要出现在纵向层。   相似文献   

5.
大展弦比复合材料机翼失速颤振分析   总被引:1,自引:0,他引:1  
研究了大展弦比复合材料机翼在较大迎角状态下的失速颤振特性,探讨了结构几何非线性和由复合材料剪裁产生的刚度耦合效果对机翼失速颤振特性的影响.首先,将复合材料机翼建模为转角和位移均可为有限值的非线性薄壁单闭室截面Euler梁,并在综合考虑结构几何非线性、气动非线性和材料各向异性对机翼运动状态的影响的基础上,建立机翼的运动微分方程.然后,使用小扰动分析的方法得到机翼在平衡位置附近的振动方程,采用ONERA半经验的非定常失速气动力模型,获得机翼在平衡位置附近的非线性失速颤振分析方程.最后,利用谐波平衡法求解并判定机翼颤振稳定性.通过算例,首先验证了算法的正确性,然后研究了几何非线性对失速颤振的影响,并讨论不同的复合材料铺层方式导致机翼失速特性的改变.  相似文献   

6.
提出了蒙特卡罗方法模拟陶瓷基复合材料基体随机开裂过程,采用剪滞模型描述了复合材料出现损伤时细观应力场,并推导得到了考虑基体开裂时复合材料拉伸应力-应变曲线计算公式.开展了室温环境下C/SiC复合材料的单轴拉伸试验,并将理论预测应力-应变曲线与试验结果进行对比.同时,采用该方法对SiC/CAS,SiC/Si3N4复合材料应力-应变曲线进行了模拟,并与国外提供的相关试验数据进行比较,发现两者吻合得较好,从而证实了蒙特卡罗法可有效地模拟考虑基体随机开裂过程的陶瓷基复合材料应力-应变曲线.此外,还分析了Weibull模量、残余热应力和初始开裂应力对应力-应变曲线的影响.研究表明:Weibull模量越大,应力-应变曲线非线性越明显;热残余应力越大,应力-应变曲线偏转越早,非线性越明显;初始开裂应力与Weibull模量对应力-应变曲线影响规律相似.   相似文献   

7.
对层合陶瓷基复合材料(CMCs)的应力-应变行为进行了研究。基于多尺度分析方法,实现了由组分性能参数到层合陶瓷基复合材料整体应力-应变的计算。采用可实现单向纤维增强陶瓷基复合材料应力-应变计算的细观力学模型,由材料的细观组分性能计算出单向板的非线性弹性性能,并将单向板的弹性性能作为层合复合材料模型的输入参数,通过有限元法计算层合陶瓷基复合材料的整体应力-应变响应。与试验数据的对比表明:采用该模型可以实现层合陶瓷基复合材料在单调拉伸载荷及拉伸加卸载条件下应力-应变曲线的预测,其中数据的最大偏离为19.61%.   相似文献   

8.
CADCOMP90征文     
第二届复合材料工艺计算机辅助设计国际学术会议(CADCOMP90)定于1990年4月25~27日在比利时布鲁塞尔举行。会议征文内容:(1)复合材料系统的有限元分析,包括三维效应;(2)铺层分析与优化,铺层排列;(3)制造技术和残余应力;(4)撞击行为,振动传播和动力学;(5)环境效应的模拟;(6)非线性材料行为和特性;(7)边界元技术;(8)金  相似文献   

9.
聚合物/纳米复合材料的制备、性能及其应用展望   总被引:3,自引:0,他引:3       下载免费PDF全文
介绍了纳米粒子的表面效应、小尺寸效应、量子尺寸效应等特性,聚合物/纳米复合材料的概念和结构性能;综述了聚合物/纳米复合材料的几种常用制备方法;总结了由于纳米粒子的存在聚合物/纳米复合材料在力学、光、电、磁等方面呈现出常规材料不具备的特性,并结合其特性展望了聚合物/纳米复合材料的应用前景。  相似文献   

10.
以复合材料机翼翼根后梁下缘条对接试件为研究对象,通过有限元手段分析其失效机理和破坏过程,并对极限强度进行预测.描述试件构型、实验方法和过程,给出螺栓建模方法和挤压/旁路耦合失效判定方法,分析对比试件的应变响应和各排螺栓的钉载分布.在非线性分析方面,探讨接触、几何非线性和钉孔非线性变形对预测结果的影响;在建模方法方面,研究螺栓刚度计算方法、螺栓建模方法、温度和网格密度等因素的影响规律.结果表明:材料非线性对计算结果的影响最为显著;采用CBUSH单元模拟螺栓并采用Huth公式计算螺栓刚度预测的极限载荷与实验结果最为接近;网格密度、温差等对计算结果的影响较小.研究结果可对复合材料连接结构的工程强度预测、校核提供算例和参考,并对各参数影响提供定量的概念.  相似文献   

11.
The nonlinear system concepts of nonlinear transfer functions are extended to nonlinear cross sections which may be used to quantitatively describe the characteristics of a nonlinear scatter. The concept of nonlinear cross sections is used to generalize the radar equation for nonlinear scattering objects.  相似文献   

12.
层合圆板三维非线性问题的解析方法   总被引:1,自引:0,他引:1  
 提出了一种复合材料层合圆板三维非线性问题的解析方法。分析了中等大挠度的几何非线性问题,采用摄动方法和变分原理来满足三维弹性理论基本微分方程及边界条件,得到了受横向载荷作用的正交各向异性单层固支圆板和层合固支圆板的高精确度三维非线性解析解,并图示出了板中的位移和应力分布。结果表明,该解析方法对于求解层合板的三维非线性问题是有效的。  相似文献   

13.
李卫彬  秦晓旭 《航空学报》2015,36(11):3742-3750
为了获得更好的材料性能,需要对热处理工艺参数进行精确地优化。非线性超声无损检测技术是一种可以有效表征材料微观结构状态变化的评估方法,可以用来评估、优化热处理工艺参数。利用非线性超声波对热处理后的X-750合金材料进行评估,根据超声传播的非线性响应不同,对材料的性能变化做出判断,并与线性超声检测技术的评估结果进行了对比研究。研究发现经过热处理之后,材料性能显著提高,在其中传播的超声非线性响应则明显下降。材料经过热处理后性能提升越大,其声学非线性响应就会变得越小。根据超声波传播的非线性响应定性评估了3种不同的热处理工艺,明确了最优的镍基高温合金X-750退火工艺参数。研究证实了非线性超声方法的敏感度优于传统的线性超声评估方法,可以对材料的热处理效果进行无损评估,从而对热处理工艺参数进行优化与完善。  相似文献   

14.
A rapid and efficient method for static aeroelastic analysis of a flexible slender wing when considering the structural geometric nonlinearity has been developed in this paper. A non-planar vortex lattice method herein is used to compute the non-planar aerodynamics of flexible wings with large deformation. The finite element method is introduced for structural nonlinear statics analysis. The surface spline method is used for structure/aerodynamics coupling. The static aeroelastic characteristics of the wind tunnel model of a flexible wing are studied by the nonlinear method presented, and the nonlinear method is also evaluated by comparing the results with those obtained from two other methods and the wind tunnel test. The results indicate that the traditional linear method of static aeroelastic analysis is not applicable for cases with large deformation because it produces results that are not realistic. However, the nonlinear methodology, which involves combining the structure finite element method with the non-planar vortex lattice method, could be used to solve the aeroelastic deformation with considerable accuracy, which is in fair agreement with the test results. Moreover, the nonlinear finite element method could consider complex structures. The non-planar vortex lattice method has advantages in both the computational accuracy and efficiency. Consequently, the nonlinear method presented is suitable for the rapid and efficient analysis requirements of engineering practice. It could be used in the preliminary stage and also in the detailed stage of aircraft design.  相似文献   

15.
一种非线性末制导系统模型的精确线性化   总被引:1,自引:0,他引:1  
曹光前 《飞行力学》2000,18(2):85-88
针对未来高机动目标的拦截 ,运用非线性系统几何理论中的精确线性化方法 ,设计了一种空空导弹非线性末制导系统加速度指令。假设目标做逃逸机动 ,弹体 -自动驾驶仪响应用一个二阶环节描述 ,建立了导弹目标三维相对运动方程。根据终端约束直接选取系统输出阵 ,经动态反馈线性化 ,将非线性系统模型转化为线性方程 ,求得了目标任意机动时的非线性末制导系统的加速度指令。以纵向平面为例进行了仿真计算 ,结果表明该方法是行之有效的 ,得到的解可以用来改进导弹大离轴发射角时的进攻能力。  相似文献   

16.
The application of artificial neural networks for aircraft motion control, in particular, for creation of nonlinear algorithms of the aircraft remote control system (RCS) is considered. Aircraft as a control object is represented as a multidimensional nonlinear dynamic system and nonlinear control methods are used to operate this system. The control loop is constructed using the method of inverse dynamics based on the feedback linearization principle. The nonlinear control law is represented as a neural network being learned (adjusted) by recorded or incoming measurements of motion parameters. Synthesis and testing of neural network control algorithms is performed with the fully nonlinear mathematical model of a maneuverable aircraft for three control channels. Simulation results of the closed system are presented.  相似文献   

17.
This article presents an innovative time-domain nonlinear mapping-based identification method. The method reported is applied to identify the unknown parameters of multivariable dynamic systems which are mapped by nonlinear differential equations. A systematic identification method is introduced, and a novel algorithm is developed using nonlinear error maps. An analysis of parameter convergence is provided and the regions of convergence can be found using the second method of Lyapunov. Innovative nonquadratic Lyapunov functions are designed and used. Analytical and numerical studies are performed to illustrate and validate the identification concept. The unsteady flight of a high-alpha aircraft in the longitudinal axis is chosen as a nonlinear case study. The unknown parameters are identified. Simulation results show that the model dynamics match the experimental data. The reported example demonstrates that the time-domain nonlinear mapping-based identification method ensures robustness and reduces major shortcomings in stability, convergence, and computational efficiency compared with other algorithms available  相似文献   

18.
以Legendre-Gauss-type积分节点为插值节点,构造插值基函数展开数值解,逼近有界杆上的非线性热传导方程Dirichlet边界条件的正确解。给出算法格式和相应的数值算例,表明所提算法格式的有效性和高精度。所给算法适合于非线性问题求解。  相似文献   

19.
《中国航空学报》2021,34(1):380-396
A theoretical formulation for time-domain nonlinear aeroelastic analysis of a flexible wing model is presented and validated by wind tunnel tests. A strain-based beam model for nonlinear structural analysis is combined with the Unsteady Vortex Lattice Method (UVLM) to form the complete framework for aeroelastic analysis. The nonlinear second-order differential equations are solved by an implicit time integration scheme that incorporates a Newton-Raphson sub-iteration technique. An advanced fiber optic sensing technique is firstly used in a wind tunnel for measuring large structural deformations. In the theoretical study, the nonlinear flutter boundary is determined by analyzing the transient response about the nonlinear static equilibrium with a series of flow velocities. The gust responses of the wing model at various gust frequencies are also studied. Comparisons of the theoretical and experimental results show that the proposed method is suitable for determining the nonlinear flutter boundary and simulating the gust response of flexible wings in the time domain.  相似文献   

20.
非线性支承转子的动平衡   总被引:1,自引:1,他引:0  
影响系数法是利用线性系统中校正量和被测量之间的线性关系进行转子动平衡。实际应用中,转子系统往往是支承在具有非线性刚度的轴承上。由于线性假设不成立,直接使用影响系数法进行转子动平衡将十分困难。本文运用Lagrange方程和柔度影响系数,建立了非线性支承多盘转子系统的动平衡计算模型,提出了运用优化算法对非线性系统进行等效线性化来平衡非线性支承转子的方法。计算实例表明转子由不平衡量引起的振动得到了大幅度减少,达到了非线性支承转子动平衡的目的,效果良好。   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号