基于相似变换的涡扇发动机智能动态推力估计方法

智能推力估计面临飞行包线大、工作状态多变带来的数据采集和处理问题，获得的训练数据难以覆盖整个飞行包线的各种过渡工作状态，为此本文提出一种基于相似变换的推力估计数据处理方法。通过机理分析选择推力估计器输入，以相似变换对推力估计的输入和输出数据进行处理，并设计了基于输入延迟的深层动态神经网络来实现动态推力估计。非训练数据区域的动态仿真结果表明，相似变换后，深层动态神经网络的最大推力估计误差降低了62.20%，平均误差降低了43.50%；未进行相似变换时，相比深层静态神经网络，深层动态神经网络的最大推力估计误差降低了43.42%，平均误差降低了2.35%，仿真结果表明了本文所提出的数据处理方法和动态推力估计结构有效性。     

A new quadrature sampling and processing approach

A quadrature sampling and array signal processing technique that differs from earlier approaches in that is processes the data before the Hilbert transformation is presented. A fast Fourier transformation (FFT) technique that performs the discrete Fourier transformation (DFT) on the sampled data directly without Hilbert transformation is proposed for frequency-domain signal processing. For array signal processing, the proposed approach does not perform Hilbert transformation prior to signal combining. It features high processing speed, low distortion, and hardware simplicity. Error analyses, performance evaluation, and computer simulation results are included     

Monopulse DOA estimation of two unresolved Rayleigh targets

This paper provides for new approaches to the processing of unresolved measurements as two direction-of-arrival (DOA) measurements for tracking closely spaced targets rather than the conventional single DOA measurement of the centroid. The measurements of the two-closely spaced targets are merged when the target echoes are not resolved in angle, range, or radial velocity (i.e., Doppler processing). The conditional Cramer Rao lower bound (CRLB) is developed for the DOA estimation of two unresolved Rayleigh targets using a standard monopulse radar. Then the modified CRLB is used to give insight into the boresight pointing for monopulse DOA estimation of two unresolved targets. Monopulse processing is considered for DOA estimation of two unresolved Rayleigh targets with known or estimated relative radar cross section (RCS). The performance of the DOA estimator is studied via Monte Carlo simulations and compared with the modified CRLB     

IMM estimator with out-of-sequence measurements

In multisensor tracking systems that operate in a centralized information processing architecture, measurements from the same target obtained by different sensors can arrive at the processing center out of sequence. In order to avoid either a delay in the output or the need for reordering and reprocessing an entire sequence of measurements, such measurements have to be processed as out-of-sequence measurements (OOSMs). Recent work developed procedures for incorporating OOSMs into a Kalman filter (KF). Since the state of the art tracker for real (maneuvering) targets is the interacting multiple model (IMM) estimator, the algorithm for incorporating OOSMs into an IMM estimator is presented here. Both data association and estimation are considered. Simulation results are presented for two realistic problems using measurements from two airborne GMTI sensors. It is shown that the proposed algorithm for incorporating OOSMs into an IMM estimator yields practically the same performance as the reordering and in-sequence reprocessing of the measurements. Also, it is shown how the range rate from a GMTI sensor can be used as a linear velocity measurement in the tracking filter.     

基于多DSP芯片的实时SAR雷达转角变换模块设计

设计了一款基于多DSP芯片的并行SAR雷达转角变换模块,用于协调合成孔径雷达(SAR:SyntheticAperture Radar)雷达距离处理模块和方位处理模块间的数据转换。设计采用了多片AD公司的超级哈佛结构的DSP芯片,这样能进行高速大容量的浮点运算。为满足SAR雷达的大数据量存储,选用了大容量的DRAM,并配有CPLD模块用于接口控制。设计解决了处理时间与容量的矛盾,实现了SAR雷达转角模块数据的实时高速处理。     

Adaptive Maximum Likelihood Receiver for Direct-Ranging Applications

Recent interest in direct-ranging navigation methods has prompted new research into practical receiver structures which provide improved signal processing. Maximum likelihood receivers are compared with conventional phase-locked receivers by theoretical and simulation methods as phase estimators based on signal measurements only. Signal-to-noise ratio (SNR) enhancement is examined and filter recommendations made. An adaptive maximum likelihood receiver is then developed which uses both signal measurements and a priori data to improve phase estimation accuracy. Simulation results indicate a 33.3 dB processing gain yielding a ranging error standard deviation of ±15 feet for zero dB received SNR. Nonadaptive and adaptive receivers are fabricated, flight tested, and experimental results reported.     

Performance analysis for DOA estimation algorithms: unification,simplification, and observations

Subspace based direction-of-arrival (DOA) estimation has motivated many performance studies, but limitations such as the assumption of an infinite amount of data and analysis of individual algorithms generally exist in these performance studies. The authors have previously proposed a unified performance analysis based on a finite amount of data and achieved a tractable expression for the mean-squared DOA estimation error for the multiple signal classification (MUSIC). Min-Norm, estimation of signal parameters using rotational invariance techniques (ESPRIT), and state-space realization algorithms. However, this expression uses the singular values and vectors of a data matrix, which are obtained by the highly nonlinear transformation of the singular value decomposition (SVD). Thus the effects of the original data parameters such as numbers of sensors and snapshots, source coherence and separations were not explicitly analyzed. The authors unify and simplify this previous result and derive a unified expression based on the original data parameters. They analytically observe the effects of these parameters on the estimation error     

基于无迹卡尔曼滤波法的串联型电池系统 荷电状态估计研究

以锂离子电池为载体的电源系统为航天器稳定可靠运行提供了一种有效的方式.多个电池单体经串联可扩大电池系统容量,即串联型电池系统.为准确估计串联型锂离子电池系统的荷电状态(State of Charge,SOC),针对扩展卡尔曼滤波(Extended Kalman Filter,EKF)计算复杂、精度不高等问题,结合串联型电池系统空间状态方程,提出基于无迹卡尔曼滤波法(Unscented Kalman Filter,UKF)的串联型电池系统荷电状态估计算法.在恒流和脉冲两种工况下,通过对比分析UKF与EKF算法的仿真结果与实验数据的匹配情况,证明了提出算法的准确性和高鲁棒性.     

Spectral Analysis and Subtraction of Noise in Radar Signals

A new method of maximum entropy spectral estimation called the revised maximum entropy method (MEM) is formulated and is applied to the spectral analysis of the echo signals from atmospheric turbulence observed by an incoherent scatter radar. The revised MEM is shown free from many demerits of the other methods for spectral analysis. Further it makes it possible to subtract the white noise usually contained in the data during the processing. Some examples of spectral estimation are shown for the actual radar signals and the simulated data. Another application of the revised MEM is the subtraction of the clutter component which is difficult to do by linear filtering. The method is successfully applied to several data abounding with the clutter to obtain the spectra of the echo signals with less clutter distortion.     

A fully automated framework for helicopter rotor blades design and analysis including aerodynamics,structure, and manufacturing

This study describes an integrated framework in which basic aerospace engineering aspects (performance, aerodynamics, and structure) and practical aspects (configuration visualiza-tion and manufacturing) are coupled and considered in one fully automated design optimization of rotor blades. A number of codes are developed to robustly perform estimation of helicopter config-uration from sizing, performance analysis, trim analysis, to rotor blades configuration representa-tion. These codes are then integrated with a two-dimensional airfoil analysis tool to fully design rotor blades configuration including rotor planform and airfoil shape for optimal aerodynamics in both hover and forward flights. A modular structure design methodology is developed for real-istic composite rotor blades with a sophisticated cross-sectional geometry. A D-spar cross-sectional structure is chosen as a baseline. The framework is able to analyze all realistic inner configurations including thicknesses of D-spar, skin, web, number and ply angles of layers of each composite part, and materials. A number of codes and commercial software (ANSYS, Gridgen, VABS, PreVABS, etc.) are implemented to automate the structural analysis from aerodynamic data processing to sec-tional properties and stress analysis. An integrated model for manufacturing cost estimation of composite rotor blades developed at the Aerodynamic Analysis and Design Laboratory (AADL), Aerospace Information Engineering Department, Konkuk University is integrated into the framework to provide a rapid and dynamic feedback to configuration design. The integration of three modules has constructed a framework where the size of a helicopter, aerodynamic performance analysis, structure analysis, and manufacturing cost estimation could be quickly investigated. All aspects of a rotor blade including planform, airfoil shape, and inner structure are considered in a multidisciplinary design optimization without an exception of critical configuration.     

自适应卡尔曼滤波在航空发动机参数估计中的应用

介绍根据实际飞行数据并用卡尔曼滤波方法对某型发动机的参数估计及其结果。重点研究了卡尔曼滤波在航空发动机参数估计中的滤波发散问题和解决这一问题的自适应卡尔曼滤波、飞行条件补偿及模型修正的综合方法。      

双曲正切变换在VLSI设计中的研究应用

从双曲正切tanh变换在稳健的信号处理和统计估计的观点叙述了双曲正切变换的特性。介绍了利用双曲正切变换特性设计VLSI的方法。通过实际的设计证明,双曲正切变换特性在超大规模集成电路VLSI的设计中有着很好的应用前景。特别是在模拟VLSI的设计中,对包含噪声输入信号的估计和统计分析具有广泛的应用。     

航天器DOR信号本地相关处理的建模与仿真

详述了DOR（差分单向测距）信号的本地相关处理方法。首先根据轨道预报确定先验时延模型值,利用高精度频率估算方法估计航天器DOR信号的星上发射频率,然后通过时延模型值与频率估计值构造DOR本地模型信号,再将此模型信号分别与测站接收的DOR实测信号进行互相关运算,提取相关相位,解算高精度时延观测量。推导了DOR信号本地相关处理的数学模型,通过信号仿真验证了该方法的有效性,在仅考虑系统噪声影响与轨道预报误差的条件下,仿真时延测量精度达到0.1 ns,为深空航天器精密轨道测量提供了一种可借鉴的技术方法。     

军用飞机状态估计与参数辨识软件包研制

在对最优输入设计、数据协调和数据分析分别进行研究的基础上,应用软件工程化方法研制出相应的软件,再通过管理软件进行统~管理,集成了~个完整的军用飞机状态估计与参数辨识软件包MASEPI。最后,通过仿真测试和实测数据处理,该软件包的有效性和实用性得到了验证和确认。现已应用于实际工程试验与试飞数据处理。     

双星预警系统弹道参数估计及一些问题分析

主要讨论由2颗地球同步轨道卫星组成的卫星预警系统(简称双星预警系统)中弹道导弹参数的估计问题。阐述了主动段运动的建模问题和弹道数据处理方法,考虑到微分求速的重要性,采用了带光滑约束的样条拟合方法。结合预警系统对弹道导弹预警的具体情况,分别讨论了预警系统下的发射原点估计、射向估计、关机时刻估计、关机点弹道参数估计、落点估计等问题。还讨论了系统中存在的两个问题的分析与解决。模型及分析方法均经过理论和仿真的验证,可应用于双星预警系统下的实际预警的研究。     

Scanning, Tracking, and Mapping State Variable Estimation Algorithms

Recursive state equation estimation algorithms are derived to determine optimal estimation error covariance and state estimate for a linear dynamic system, driven by time-varying and positionverying (or angle-varying) functions whose a priori covariance are described. Retracing the same trajectory with the system measuring device causes the position varying function to repeat and can significantly reduce estimation errors. Applications for these algorithms include improving accuracy of a position dependent quantity to be mapped, or recursively processing radar or sonar data from repeating scans over the same area. Three types of return path patterns are considered: 1) multiple independent returns, 2) reverse returns, and 3) cyclical returns.     

Aerodynamic Modeling and Parameter Estimation from QAR Data of an Airplane Approaching a High-altitude Airport

Aerodynamic modeling and parameter estimation from quick accesses recorder (QAR) data is an important technical way to analyze the effects of highland weather conditions upon aerodynamic characteristics of airplane. It is also an essential content of flight accident analysis. The related techniques are developed in the present paper, including the geometric method for angle of attack and sideslip angle estimation, the extended Kalman filter associated with modified Bryson-Frazier smoother (EKF-MBF) method for aerodynamic coefficient identification, the radial basis function (RBF) neural network method for aerodynamic modeling, and the Delta method for stability/control derivative estimation. As an application example, the QAR data of a civil airplane approaching a high-altitude airport are processed and the aerodynamic coefficient and derivative estimates are obtained. The estimation results are reasonable, which shows that the developed techniques are feasible. The causes for the distribution of aerodynamic derivative estimates are analyzed. Accordingly, several measures to improve estimation accuracy are put forward.     

Stap using knowledge-aided covariance estimation and the fracta algorithm

In the airborne space-time adaptive processing (STAP) setting, a priori information via knowledge-aided covariance estimation (KACE) is employed in order to reduce the required sample support for application to heterogeneous clutter scenarios. The enhanced FRACTA (FRACTA.E) algorithm with KACE as well as Doppler-sensitive adaptive coherence estimation (DS-ACE) is applied to the KASSPER I & II data sets where it is shown via simulation that near-clairvoyant detection performance is maintained with as little as 1/3 of the normally required number of training data samples. The KASSPER I & II data sets are simulated high-fidelity heterogeneous clutter scenarios which possess several groups of dense targets. KACE provides a priori information about the clutter covariance matrix by exploiting approximately known operating parameters about the radar platform such as pulse repetition frequency (PRF), crab angle, and platform velocity. In addition, the DS-ACE detector is presented which provides greater robustness for low sample support by mitigating false alarms from undernulled clutter near the clutter ridge while maintaining sufficient sensitivity away from the clutter ridge to enable effective target detection performance     

深空探测器无线电干涉测量开源数据处理系统构建及试验

为更好地开展深空无线电干涉测量试验,基于DiFX(Distributed FX,分布式FX型相关处理)、SPICE(Spacecraft Planet Instrument Camera-matrix Events,航天器行星仪器照相机矩阵事件)、HOPS(Haystack Observatory Postprocessing System,Haystack克天文台后处理系统)及AIPS(Astronomical Image Processing System,天文图像处理系统)等开源软件,搭建了一套可用于深空探测器信号相关处理的无线电干涉测量数据处理系统。首先介绍了该系统的整体架构及组成,然后介绍了系统各组成模块的功能及工作原理,最后利用该系统对嫦娥三号着陆器开展了观测试验,并对观测数据进行了处理。试验结果表明,该系统能成功实现深空航天器信号的相关处理、条纹拟合,以及时延解算等功能,有望为我国嫦娥五号任务及火星探测任务数据处理提供支持。     

Optimal and adaptive reduced-rank STAP

This paper is concerned with issues and techniques associated with the development of both optimal and adaptive (data dependent) reduced-rank signal processing architectures. Adaptive algorithms for 1D beamforming, 2D space-time adaptive processing (STAP), and 3D STAP for joint hot and cold clutter mitigation are surveyed. The following concepts are then introduced for the first time (other than workshop and conference records) and evaluated in a signal-dependent versus signal independent context: (1) the adaptive processing “region-of-convergence” as a function of sample support and rank, (2) a new variant of the cross-spectral metric (CSM) that retains dominant mode estimation in the direct-form processor (DFP) structure, and (3) the robustness of the proposed methods to the subspace “leakage” problem arising in many real-world applications. A comprehensive performance comparison is conducted both analytically and via Monte Carlo simulation which clearly demonstrates the superior theoretical compression performance of signal-dependent rank-reduction, its broader region-of-convergence, and its inherent robustness to subspace leakage