Two-craft tether formation relative equilibria about circular orbits and libration points

The relative equilibria of a two spacecraft tether formation connected by line-of-sight elastic forces moving in the context of a restricted two-body system and a circularly restricted three-body system are investigated. For a two spacecraft formation moving in a central gravitational field, a common assumption is that the center of the circular orbit is located at the primary mass and the center of mass of the formation orbits around the primary in a great-circle orbit. The relative equilibrium is called great-circle if the center of mass of the formation moves on the plane with the center of the gravitational field residing on it; otherwise, it is called a nongreat-circle orbit. Previous research shows that nongreat-circle equilibria in low Earth orbits exhibit a deflection of about a degree from the great-circle equilibria when spacecraft with unequal masses are separated by 350 km. This paper studies these equilibria (radial, along-track and orbit-normal in circular Earth orbit and Earth–Moon Libration points) for a range of inter-craft distances and semi-major axes of the formation center of mass. In the context of a two-spacecraft Coulomb formation with separation distances on the order of dozens of meters, this paper shows that the equilibria deflections are negligible (less than 10^?6°) even for very heterogeneous mass distributions. Furthermore, the nongreat-circle equilibria conditions for a two spacecraft tether structure at the Lagrangian libration points are developed.     

绳系卫星系统复杂模型研究

对绳系卫星系统提出一种仿真度更高的动力学模型，着重研究状态保持阶段的子星的振荡与姿态运动。主星设为质点，与系统质心相合，作圆轨道运动；子星取为三维刚体，系绳采用株式模型。除绳系统动能、引力位能及系绳弹性势能外，还考虑了系绳的结构阻尼，以及由系绳外皮包引起的弯曲力矩与扭转力矩。计算机辅助推导参与模拟计算程序设计。     

Resonance Effects when Moving a Small Spacecraft around the Center of Mass in a Deployable Tether System

Cosmic Research - The resonance motions of a small spacecraft relative to the center of mass when deploying a tether system are analyzed. The tether system is deployed from a base spacecraft moving...     

Design concepts for the first 40 km a key step for the space elevator

The Marine Node for the Space Elevator Infrastructure is the base for all activities to load and unload the cargo and climbers. As the basic design of the space elevator power system is solar power only, the first 40 km is hazardous to operations and demands enclosed packaging of fragile tether climbers. A significant question is: how do we place a full-up tether climber, driven by solar power, above the atmosphere? Two approaches, starting at the Marine Node, allow the tether climber to initiate the climb with solar energy above the atmosphere. The third viable approach is to provide a platform at altitude for initiation of tether climb. These approaches would enable solar power to be the source of energy for climbing. The three approaches are:     

空间绳系机器人抓捕非合作目标的质量特性参数辨识

针对空间绳系机器人抓捕非合作目标/空间垃圾后需要对其进行回收/拖曳的精确控制问题,提出了一种利用抓捕后保持阶段的振动特性辨识目标参数的方法。首先,根据质量特性参数辨识的需要,推导了系统的动力学模型。不同于以往将本体卫星和被抓捕目标简化为质点的动力学模型,本文针对任意的目标抓捕位置,在考虑重力梯度影响的基础上,利用拉格朗日法获得系统各广义坐标的动力学公式。然后,分析非合作目标和系绳在后抓捕保持阶段的姿态运动。最后,在非合作目标与本体卫星没有任何信息交互的情况下,利用后抓捕阶段目标卫星和系绳特有的振动,并使用具有鲁棒性可遗忘因子的递推最小二乘法,提出了包括转动惯量和质心到任意抓捕点距离在内的质量特性参数辨识算法。     

The effect of climber transit on the space elevator dynamics

The space elevator offers an alternate and efficient method for space travel. It will have two main components. The first component is the tether (or the ribbon), which extends from the Earth to an equatorial satellite at an altitude beyond the geostationary orbit, and is fixed to a base on the surface of the Earth at its lower end. The second component is the climber, which scales the ribbon, transporting payloads to space. An important issue for effective operation of the space elevator will be to understand its dynamics. This paper attempts to develop a realistic and yet simple planar model for this purpose. The basic response of the ribbon to climber transit is determined. Both analytical and numerical results are presented. Specific climbing procedures are devised based on these results so as to minimize the adverse effects of climber transit on the ribbon.     

Geostationary station keeping control of a space elevator during initial cable deployment

This paper presents a basic concept to derive an orbital control strategy to achieve the full deployment and the geostationary station keeping of a space elevator during its initial cable deployment. The space elevator model is composed of a main spacecraft, a sinker mass and a massive cable connecting them. The cable elasticity, flexibility and taper of the cross-sectional area are omitted for simplification. A reference trajectory is designed so that the space elevator and its center of mass ascend vertically along the geostationary position with keeping the geostationary orbital rate. From the reference trajectory analyses, an orbital control that leads the space elevator orbit to the reference one is derived. However it is found that the reference trajectory is unstable throughout the deployment and a linear feedback control is introduced for stabilization. It is also clarified that the libration destabilizes the orbital control because the orbital acceleration caused by the libration always acts in the opposite direction to the orbital control. Therefore, a libration control is also introduced to stabilize the coupled orbital and librational motions. Numerical simulation result clearly shows that these controls facilitate the full deployment and the geostationary station keeping of the space elevator within the feasible thrust force and amount of propellant.     

Orbital and relative motion of a tethered satellite system

A simplified model for the orbital and relative motion of a tethered satellite system is presented. The tether acts as a light elastic string with small structural damping but without bending stiffness. Its mass is taken into account in the calculation of the total kinetic and potential energies of the tethered system. This formulation allows the inclusion of the complete gravity gradient influence on the dynamics of the system. The resulting three-dimensional motion is separated in the centre of mass orbital motion on the one hand and the relative motion of the end-bodies on the other. No restrictions on length of the tether or on mass ratio of the end-masses are imposed. It is found that the frequencies and amplitudes of the longitudinal tether oscillations are realistic as long as the tether mass is less than that of the subsatellite.     

Motion of a descent capsule relative to its center of mass when deploying the orbital tether system

The spatial motion relative to the center of mass is considered for a capsule on an elastic tether, when it is unrolled from a spacecraft by a special program. The spacecraft is in a circular orbit and oriented relative to the local vertical, which is guaranteed by operation of its own stabilization system. Angular motion of the capsule relative to the tether direction is studied, and the main factors influencing the stability of this motion are analyzed. An approximate quasi-linear mathematical model of the capsule attitude motion is obtained, which allows one to estimate the influence of major disturbances of its motion. The results of numerical simulations are presented for characteristic cases of the capsule motion.     

自主机动空间绳网机器人设计与动力学建模

设计了一种新型“平台+绳系+柔性网+自主机动单元”结构的空间机器人系统,较强的机动能力和较大的任务范围使其在空间垃圾清理任务中具有显著的优势。详细描述了自主机动空间绳网机器人的概念、任务过程和特点。为了分析自主机动空间绳网机器人逼近目标过程开始时柔性网网型的变化趋势,采用质量集中法建立了逼近过程的动力学模型,模型中将柔性网离散化为无质量弹性杆和质点的集合,同时考虑了自主控制力的作用。在不同条件下对逼近过程中的网型变化进行了数字仿真,仿真结果表明：逼近过程开始时,自主机动单元无控状态下柔性网将产生收口运动,且收口运动的强弱与自主机动单元和柔性网的初速有关;逼近轨迹也将偏离目标方向。通过自主机动单元的自主控制力能够避免收口运动和逼近方向偏移的产生。     

有分布质量系绳的卫星系统的动力学

以一组偏微分方程建立起的数学模型和采用距离速率控制算法来描述系统的受控运动。创建的递推算法用于计算系统的定常运动和称驻形。根据求解小偏差运动方程和通过边界条件求解特征根以判定驻形的稳定性。给出了模拟结果。     

Safety implications of unscheduled situations in the operation of tethered satellite systems from the international space station

Space based experiments involving the use of tethers were examined with a view to identifying the implications of unscheduled events such as tether severance and interference between the tether and other hardware. It is the authors opinion that these type of events, which have important consequences for the operation of tethers in space, have received insufficient consideration in the extensive literature on the subject. In particular, the investigation of the interference event appears to be completely new. The examination focussed on tether experiments planned for the forthcoming International Space Station (ISS). Results were obtained through the use of a highspeed, non-linear, computer simulation model specifically designed for use with tethered satellite systems. Simulations showed that both severance and interference were possible during retrieval of the tether, particularly if ‘skip-rope’ motion is initiated. The motion following each of these incidents is predicted and shows that these unscheduled events are potentially very hazardous for the ISS. While the results of these simulations are not directly applicable to specific operations on the ISS, they fulfill the primary purpose of this paper which is the demonstration of this new technology.     

系统参数对电动力绳系动力学的影响

将电动力绳系(EDT)的主星质量、子星质量、绳系质量以及绳系中的电流视为系统参数,研究这些参数对系统的摆动动力学和轨道动力学的影响。哑铃模型下的电动力绳系摆动动力学方程存在不稳定的周期解,通过Floquet理论来衡量周期解的不稳定程度,从而研究各系统参数对摆动动力学的影响。建立了用春分点轨道元素的形式描述的电动力绳系轨道动力学方程,并以降轨时间来衡量电动力绳系的降轨效率,从而研究系统参数对轨道动力学的影响。运用算例对周期解迁移矩阵的特征值、降轨时间随各系统参数的变化关系进行了仿真,分别得出了各系统参数对系统摆动动力学和轨道动力学的影响。综合本文的仿真结果,并考虑实际发射及空间运行中的其它因素,对电动力绳系的设计和降轨策略提出了建议。     

Characterization of the optimal mass problem for aerobraking tethers

In the aerobraking tether concept, a probe, connected to an orbiter by a long, thin tether, passes through the atmosphere of a target planet to provide a desired velocity change, while keeping the orbiter above the sensible atmosphere. In earlier work, simple analytic models have been developed which accurately describe the characteristics of the mass-optimal tether. In this paper these models are generalized so that design of the spacecraft and the aerobraking maneuver can be completely characterized by four independent parameters. By comparing the tether mass (e.g. for aerocapture) with the propellant mass required to capture the orbiter, we show that aerobraking tethers have a clear advantage for a wide range of maneuvers.     

Optimal control of a spinning double-pyramid Earth-pointing tethered formation

The dynamics and control of a tethered satellite formation for Earth-pointing observation missions is considered. For most practical applications in Earth orbit, a tether formation must be spinning in order to maintain tension in the tethers. It is possible to obtain periodic spinning solutions for a triangular formation whose initial conditions are close to the orbit normal. However, these solutions contain significant deviations of the satellites on a sphere relative to the desired Earth-pointing configuration. To maintain a plane of satellites spinning normal to the orbit plane, it is necessary to utilize “anchors”. Such a configuration resembles a double-pyramid. In this paper, control of a double-pyramid tethered formation is studied. The equations of motion are derived in a floating orbital coordinate system for the general case of an elliptic reference orbit. The motion of the satellites is derived assuming inelastic tethers that can vary in length in a controlled manner. Cartesian coordinates in a rotating reference frame attached to the desired spin frame provide a simple means of expressing the equations of motion, together with a set of constraint equations for the tether tensions. Periodic optimal control theory is applied to the system to determine sets of controlled periodic trajectories by varying the lengths of all interconnecting tethers (nine in total), as well as retrieval and simple reconfiguration trajectories. A modal analysis of the system is also performed using a lumped mass representation of the tethers.     

Satellite pitch and roll attitude maneuvers through very short tethers

Explored here is the feasibility of achieving satellite pitch and roll attitude maneuvers through tethers. The proposed tethered satellite system (TSS) comprises of four identical tethers connecting the auxiliary mass to the satellite at its four distinct off-centered and equiangularly spaced points. The open-loop tether length control laws have been developed in order to achieve arbitrary pitch and roll attitude slewing maneuvers. Numerical simulation of the nonlinear governing equations of motion for these tether length variations establishes the feasibility of executing fixed as well as chase-slewing maneuvers. Nearly passive nature of the proposed mechanism using very short tethers along with small auxiliary mass needed makes the concept particularly attractive for future space missions.     

Ground assisted rendezvous with geosynchronous satellites for the disposal of space debris by means of Earth-oriented tethers

Previous studies have shown that extended length Earth-oriented tethers in the geosynchronous (GEO) region can be used to re-orbit satellites to disposal orbits. One such approach involves the extension of a GEO based tether, collection of a debris object, and retraction of the tether, which transfers the retracted configuration to a higher energy orbit for debris disposal. The re-extension of the tether after debris disposal returns the configuration to the near-GEO altitude. The practical feasibility of such a system depends on the ability to collect GEO debris objects, attach them to a deployed tether system, and retract the tethers for transfer to the disposal orbits.This study addresses the collection and delivery of debris objects to the deployed tether system in GEO. The investigation considers the number, type and the characteristics of the debris objects as well as the collection tug that can be ground controlled to detect, rendezvous and dock with the debris objects for their delivery to the tethers system.A total of more than 400 objects are in drift orbits crossing all longitudes either below or above the geostationary radius. More than 130 objects are also known to librate around the stable points in GEO with periods of libration up to five or more years. A characterization of the position and velocity of the debris objects relative to the collection tug is investigated. Typical rendezvous performance requirements for uncooperative GEO satellites are examined, and the similarities with other approaches such as the ESA's CX-OLEV commercial mission proposal to extend the life of geostationary telecommunication satellites are noted.     

Stability and control of electrodynamic tethers for de-orbiting applications

Electrodynamic tethers provide a very promising propulsion system for de-orbiting of spent upper stages or LEO satellites. In this application, the Lorentz force generated by the interaction between the current in the wire and the geomagnetic field produces an electrodynamic drag leading to a fast orbital decay. The attractiveness of tether system lies especially in their capability to operate with uncontrollable satellites and in the modest mass requirement.The need for significant along-track forces leads however to the onset of an undesirable torque which, if not controlled, may drive the system into a dangerous instability. The electrodynamic torque determines in-plane and out-of-plane librations whose amplitude depends upon the current in the wire, mass distribution and system dimensions. Even more important, this torque is modulated along the orbit due to the changing magnetic field and ionospheric plasma density, giving rise to forced oscillations. The counteracting (and stabilizing) gravity-gradient torque is generally to small to ensure stability in typical, strongly non-symmetrical mass distributions, where a massive satellite or upper stage is attached at the lower end and a light electron collecting device (or passive ballast mass) is deployed a few kilometers above. Reducing the electron current or increasing the mass at the upper end are both unattractive solutions.In this paper we show how the electrodynamic torque pumps energy into the system (finally leading to large librations angles) and indicate that many proposed configurations are intrinsically unstable. Our results point out the need for a control strategy. Fortunately, the librations amplitudes can be limited by acting on the current flowing in the wire. Our model of a rigid, conductive tether shows that a control based upon timely current switch-off, using energy criteria, is indeed effective and simple to implement. The resultant duty-cycles are satisfactory and affect only marginally the de-orbiting times.     

Chaotic oscillations of spacecraft with an elastic radially oriented tether

A mechanical system consisting of a spacecraft with weightless elastic tether and load is considered in the paper. The spacecraft motion under the action of tensile force of a radially oriented tether is investigated. It is shown that elastic tether oscillations can result in appearance of chaotic modes of spacecraft motion. By means of the Melnikov method a condition is obtained, allowing one to determine the measure of damping sufficient for prevention of these chaotic modes. The influence of system’s mass-geometric and elastic characteristics on the form of phase portrait and on the value of periodic disturbance, caused by oscillations of the elastic vertical tether, is studied.     

Refined dynamical analysis of multi-tethered satellite formations

The dynamics of a multi-tethered satellite formation is considered here, in order to derive a minimum complexity model that successfully represents its dynamics under the action of gravity gradient force and tether tension, where tethers are modeled by means of a sequence of point-masses and massless springs (bead model). The results thus obtained are compared with those derived for a simple, massless tether model, in order to highlight the effects of tether mass on the resulting open-loop behavior. The analysis is performed by means of numerical simulation of the considered models. Once the dynamic behavior of the formation is identified for the nominal values of tether characteristics, the problems raised by the presence of tether mass are highlighted and possible solutions are outlined, when possible. A parametric analysis with respect to the tether linear mass, damping and stiffness is also discussed.