共查询到18条相似文献,搜索用时 861 毫秒
1.
2.
3.
现有的倾转旋翼机建模着重于研究其复杂的气动特性,在飞行动力学运动方程方面则研究不足,均采用了普通固定翼飞机的六自由度刚体动力学方程。然而,倾转旋翼机在过渡模式,旋翼和短舱的倾转使飞机构型产生动态变化,除了造成气动力干扰以外,旋翼和短舱的倾转还会引起重心变化,而且由于高速旋转的旋翼倾转会产生陀螺力矩效应,造成对机体的姿态干扰,采用六自由度刚体动力学方程不能反映由此造成的多体惯性耦合问题。为此,本文提出将旋翼、短舱、机体视为不同运动实体,建立倾转旋翼机的多体动力学方程,以完善其飞行动力学建模。建模过程中首先对各个微元运用牛顿定律和角动量定理,然后对各实体积分得到了惯性系下多体动力学方程,最后通过转换得到机体坐标系下的多体动力学方程组。该方程组在形式上为隐式非线性微分方程组,需首先求解状态微分量的相容初值。然后采用Runge-Kutta-Felhberg积分算法,对隐式非线性微分方程组进行了数值仿真。以XV-15数据为例对模型和仿真算法进行检验,结果表明模型和仿真算法正确。建立的模型和采用的仿真算法对研究倾转旋翼机飞行动力学特性、飞行控制技术、飞行安全问题有重要的理论和实际意义。 相似文献
4.
倾转旋翼机飞行力学特性 总被引:5,自引:2,他引:3
总结和分析了旋翼、机翼、机身、短舱和尾翼气动力模型和操纵机构特点,其中旋翼气动力模型以准定常叶素理论为基础,机翼和尾翼气动力模型以升力线理论为基础,并分析了旋翼尾流对机翼气动力气动干扰问题;建立了全量非线性倾转旋翼机飞行力学模型;以XV-15为样机,对倾转旋翼机在不同飞行模式和飞行速度下飞行力学特性展开了详细研究,得到的结论有助于深入了解倾转旋翼机飞行力学特性,也可用于倾转旋翼机飞行控制系统设计. 相似文献
5.
小型无人倾转旋翼机气动与操纵特性试验研究 总被引:3,自引:0,他引:3
由于倾转旋翼机飞行模式多,各部件气动干扰复杂且操纵面冗余,特别是倾转过渡模式,短舱带动旋翼系统倾转,结构布局发生改变,从理论上确定气动与操纵特性难度大。为了研究倾转旋翼机的气动与操纵特性,对某小型无人倾转旋翼机展开全尺寸、全模式吹风试验,其中不带动力试验主要用于研究倾转旋翼机在不同迎角、短舱倾角、前飞速度等飞行状态下的气动特性;带动力试验主要用于研究倾转旋翼机不同飞行模式带机翼与不带机翼时,旋翼/机翼/襟副翼相互干扰作用,以及总距、副翼、升降舵的操纵功效。根据试验数据推导出小型无人倾转旋翼机全包线飞行的操纵特性方法,对进一步完善倾转旋翼机设计以及试飞试验的成功提供了参考。 相似文献
6.
针对倾转旋翼机过渡阶段的强耦合性和快时变性,基于隐模型跟踪法设计了过渡阶段的自主飞行控制律。首先,考虑短舱和旋翼相对机身运动带来的额外惯性力,建立了倾转旋翼机的多体动力学模型;然后,通过飞行动力学特性分析发现倾转旋翼机过渡阶段具有强耦合性和快时变性;最后,针对强耦合性使用隐模型跟踪法实现了固定倾转角时的解耦控制,针对快时变性使用插值调用控制参数的方法实现了倾转旋翼机在整个过渡阶段的连续控制。仿真结果表明,隐模型跟踪控制系统能够达到良好的速度和轨迹跟踪效果,可以实现倾转旋翼机在过渡阶段的自主飞行仿真。 相似文献
7.
8.
9.
10.
倾转旋翼飞行器的建模和操纵分配策略 总被引:7,自引:3,他引:4
针对倾转旋翼飞行器试飞样机建立了旋翼、机翼、短舱、机身、平尾、垂尾等部件的非线性气动模型和飞行动力学模型,研究了直升机模式、倾转过渡模式和飞机模式下的操纵特性,根据配平分析和小扰动线性化处理结果得到了不同飞行模式下的操纵效率,提出了一套适用于全飞行模式的操纵分配策略,解决了飞行控制随飞行模式变化出现的气动结构部件变化与操纵冗余的难题.利用所提出的操纵分配策略可使飞行控制器统一设计,无需按不同飞行模式设计不同控制律,有效降低了飞行控制器的设计难度.仿真验证了倾转旋翼飞行器飞行动力学模型的可信性和操纵分配策略的有效性. 相似文献
11.
倾转旋翼飞行器旋翼对机翼向下载荷计算模型 总被引:3,自引:2,他引:1
针对倾转旋翼飞行器悬停和小速度前飞的直升机飞行模式下旋翼下洗流对机翼的气动干扰影响,建立了一个机翼向下载荷的计算模型.该模型中,最关键的是建立旋翼对机翼的气动干扰面积模型.此模型考虑了倾转旋翼飞行器几何尺寸条件、发动机短舱倾转角和飞行状态等参数.最后将此模型集成到XV-15倾转旋翼飞行器飞行动力学模型中,进行配平计算,... 相似文献
12.
A tilt rotor is an aircraft of a special kind, which possesses the characteristics of a helicopter and a fixed-wing airplane. However, there are a great number of important technical problems waiting for settlements. Of them, the flight control system might be a critical one. This article presents the progresses of the research work on the design of flight control system at Nanjing University of Aeronautics and Astronautics (NUAA). The flight control law of the tilt rotor aircraft is designed with the help of an inner/outer loop control structure and an eigenstructure assignment algorithm on the basis of a proper mathematical model already verified by the wind tunnel tests. The proposed control law has been born out through the construction of the flight control system and the flight tests. Now, the flight tests are still underway on a prototype of small unmanned tilt rotor aircraft. The results have evidenced the credibility of the aircraft design and the effectiveness of the flight control system for the tilt rotor working in the helicopter mode. A full envelope flight test is planned to carry out further researches on the flight control law. 相似文献
13.
14.
To study the Radar Cross-Section(RCS) characteristics of the tilt-rotor aircraft, a dynamic calculation approach that takes into account rotor rotation and nacelle tilt is presented.Physical optics and physical theory of diffraction are used to deal with the instantaneous electromagnetic scattering of the target. The RCS of the aircraft in the helicopter mode, fixed-wing mode and transition mode is analyzed. The results show that in the fixed-wing mode, the blade has a weaker deflection effect o... 相似文献
15.
16.
A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft. 相似文献
17.
倾转旋翼机是当前旋翼飞行器研究的热点,但有关舰载倾转旋翼机着舰域耦合流场的研究还很少。以两栖攻击舰(LHA)和V-22"鱼鹰"倾转旋翼机为研究对象,基于雷诺平均Navier-Stokes(RANS)方程和SST k-ω湍流模型对舰载倾转旋翼机着舰域耦合流场进行数值模拟研究,并探讨了不同着舰高度时机/舰耦合流场的相互作用。结果表明:倾转旋翼尾流会与舰船脱落涡、甲板舷涡以及舰岛艉涡发生较强的"涡-涡干扰"现象,加大了耦合流场的湍流强度;舰船流场的低频非稳态特征会导致旋翼桨盘气动载荷发生显著的波动,不利于飞行操纵;垂直降落过程中,舰船甲板会形成"前低后高"的压力分布特征,倾转旋翼RMS气动载荷值也会明显增加,降低了着舰安全性,且右旋翼RMS气动载荷值比左旋翼平均大一倍以上,这也表明右旋翼面临着更加严峻的气动环境。 相似文献