Staggered Costas Signals

A radar signal, based on coherent processing of a train of staggered Costas bursts, is suggested and investigated. The selection of sequences of each burst is based on a minimum number of collocation of their individual ambiguity function sidelobe peaks. The resulting ambiguity function combines qualities of both "thumbtack" and "bed of nails" signals. Comparison with linear-FM, V-FM, and complementary phase coded (CPC) signals is given, as well as comparison with hybrid signals consisting of both phase and frequency coding.     

Second time around radar return suppression using PRI modulation

A technique for suppressing second-time-around radar returns using pulse-repetition interval (PRI) modulation is presented and analyzed. It is shown that a staggered PRI radar system can offer considerable improvement over a nonstaggered radar system in rejecting second-time-around returns which cause false alarms. This improvement is a function of detector implementation (noncoherent integrator or binary integrator), the number of staggered PRIs, the quiescent false alarm number, the Swerling number of the false return, the transmitted signal power, the second-time-around noise power, and the quiescent noise power of the radar. Small changes in transmitted signal power can be traded off with the quiescent false alarm number to suppress the bogus return significantly. In addition, for a noncoherent integrator, all other parameters being equal, if the second-time-around return is a Swerling case II or IV target, then there is an optimum number of staggered PRIs that can be chosen to minimize the likelihood of its detection. It is also shown that the binary integrator significantly reduces the number of second-time-around return detections when compared with the noncoherent integrator. However, there is an accompanying loss of detection     

Statistical analysis of real clutter at different range resolutions

A statistical analysis is presented of real radar clutter data collected using the McMaster I FIX radar in 1998 and stored in the Grimsby database. We first show the deviations of the amplitude statistics from the Rayleigh model and the suitability of the K- and Weibull-distribution for the first-order amplitude statistical characterization. Thus we focus on the I and Q components of the available data and study their statistical compatibility with the compound Gaussian model. Towards this goal it has been necessary devising appropriate testing procedures; in particular, with reference to the higher order statistics agreement, we have designed a validation procedure involving the clutter representation into generalized spherical coordinates. Remarkably the results have confirmed the suitability of the spherically invariant random processes (SIRPs) for the correct modeling of the radar clutter. Finally we have performed a spectral analysis highlighting the close matching between the estimated clutter spectral density and the exponential model.     

与空时二维自适应滤波兼容的单脉冲测角新方法

针对机载相控阵雷达系统提出了一种空时二维自适应单脉冲测角方法 ,当存在阵元和通道幅相误差时它仍具有较高的测角精度。还给出了一种稳健的自适应和、差波束增益归一化方法 ,并讨论了所提方法的简化兼容实现方案。最后给出了基于高保真雷达杂波模拟数据的仿真实验结果     

Signal Processors and Accuracy of Three-Beam Monopulse Tracking Radar

The problem of implementing a monopulse tracking radar is considered when three beams are used rather than the customary four. Signal processors are developed for both amplitude and phase comparison radar cases and the functional form is given for the general case (a combination or hybrid case). Accuracy is investigated by applying the Cramer-Rao inequality. General results are given for the maximum theoretical accuracy of estimating target amplitude, phase, and position angles when the radar is of the amplitude comparison type. Equations sufficient for obtaining accuracies in the phase comparison and combination cases are included.     

Matched Filter Criteria and Range Weighting for Weather Radar

The effective weighting function for weather radar is defined. This weighting function considers the effects of both the transmitted signal and the receiver filter. It is used to assign effective ranges to samples taken at prescribed times. For uniformly distributed targets it is shown that "signal"-to-noise ratio depends on the receiver filter, transmitted signal envelope, and receiver noise spectral density. Maximization of this signal-to-noise ratio when range resolution constraints are imposed is discussed, and a receiver design approach specifically adapted for Doppler weather radars is developed.     

Doppler visibility of coherent ultrawideband random noise radar systems

Random noise radar has recently been used in a variety of imaging and surveillance applications. These systems can be made phase coherent using the technique of heterodyne correlation. Phase coherence has been exploited to measure Doppler and thereby the velocity of moving targets. The Doppler visibility, i.e., the ability to extract Doppler information over the inherent clutter spectra, is constrained by system parameters, especially the phase noise generated by microwave components. Our paper proposes a new phase noise model for the heterodyne mixer as applicable for ultrawideband (UWB) random noise radar and for the local oscillator in the time domain. The Doppler spectra are simulated by including phase noise contamination effects and compared with our previous experimental results. A genetic algorithm (GA) optimization routine is applied to synthesize the effects of a variety of parameter combinations to derive a suitable empirical formula for estimating the Doppler visibility in dB. According to the phase noise analysis and the simulation results, the Doppler visibility of UWB random noise radar depends primarily on the following parameters: 1) the local oscillator (LO) drive level of the receiver heterodyne mixer, 2) the saturation current in the receiver heterodyne mixer, 3) the bandwidth of the transmit noise source, and 4) the target velocity. Other parameters such as the carrier frequency of the receiver LO and the loaded quality factor of the LO have a small effect over the range of applicability of the model and are therefore neglected in the model formulation. The Doppler visibility curves generated from this formula match the simulation results very well over the applicable parameter range within 1 dB. Our model may therefore be used to quickly estimate the Doppler visibility of random UWB noise radars for trade-off analysis     

Emulating random process target statistics (using MSF)

The topics of matrix spectral factorization (MSF) in conjunction with results from realization theory are applied here in simulating a stationary multi-input/multi-output (MIMO) linear system from a specified power spectral density matrix. MSF provides the appropriate transfer function matrix and realization theory specifies the corresponding parameters of a linear system having this transfer function This approach can be used to correctly capture the cross correlations that exist in a multichannel vector random process (representing a particular radar target signature). Aspects of the solution to this problem are illustrated using an original representative example problem with a closed-form answer. Existing software programs for accomplishing MSF are identified and one has been successfully validated using the known closed-form solution mentioned above. A streamlined realization algorithm (offered here as the primary theoretical contribution) can be used along with the MSF computer program and can now be applied to actual radar data. Besides multichannel spectral estimation, several other important applications of this same MSF solution methodology are summarized in Appendix B including extending applicability to the complex case (to handle radar polarization issues related to coherent phase processing), and finally in reexpressing second order statistics of a multichannel autoregressive moving average (ARMA) process as those of a simpler but mathematically equivalent autoregressive (AR) process of slightly higher dimensions (as another original application of the same major result offered here)     

Model for Spectral and Polarization Characteristics of Chaff

A stochastic model which describes the spectral and polarization characteristics of radar echoes from a chaff cloud consisting of a collection of rotating dipoles, which may have either completely random or preferred orientations, is presented.     

比相单脉冲雷达测角与角闪烁研究

比相单脉冲雷达采用和差通道接收信号比相的方法测角。一般认为,雷达事实上并不是在测量目标的方向,而是在测量目标的角闪烁方向。从特殊的两点目标出发,分析了单点目标和复杂目标下比相单脉冲雷达和差通道方式测角的原理与内在异同,探讨了比相单脉冲雷达测角与角闪烁的关系,提出有关雷达测角的新的观点。     

机载气象雷达回波信号仿真系统

设计了一个机载气象雷达回波信号仿真系统,可用于高保真雷达回波信号的生成与演示。基于高保真风场建模数据,依照真实机载气象雷达的扫描方式初始化仿真参数,对风场数据进行机载气象雷达回波仿真,得到了可靠的仿真数据,并对可靠性进行验证。该系统采用C#与Matlab联合编程的方法进行实现,可实现的功能包括各种气象目标在不同模式下的雷达回波仿真,雷达回波数据正确性的验证及展示。得到的信号可为机载气象雷达信号处理和数据处理算法的开发提供数据支持。     

STAP with medium PRF mode for non-side-looking airborne radar

Space-time adaptive processing (STAP) has been widely discussed for airborne radar systems to improve the system performance of detecting targets. This is especially true for airborne early warning (AEW) radar, which should find long-range and small radar cross section (RCS) targets such as the stealth aircraft and missiles. However, in existing airborne radar literature, STAP is mainly considered for clutter and jamming rejection in side-looking airborne radar (SLAR) applications. There have been fewer discussions on airborne radar with non-side-ways looking array radar (non-SLAR). The STAP of non-SLAR such as forward looking array radar is also very important and can not be avoided for airborne radar to detect targets in all directions. The STAP of the non-SLAR is studied here. A scheme has been proposed, which is processed by the way of STAP combined with multiple staggered medium pulse repetition frequencies (PRFs). We further study the selection of PRFs in order to make the scheme more available for non-SLAR radar. We analyze two typical non-SLAR cases, i.e., inclined-sideways looking array and forward looking array. We examine this scheme by comparing the performances of three processing systems under the criteria of range-velocity blind zone minimization. Computer simulation results show the multiple-PRFs STAP scheme is feasible for non-SLAR and can be applied to phased-array AEW radar systems     

Properties of Staggered PRF Radar Spectral Components

Expressions for moving target indicator (MTI) improvement factor limitation due to pulse repetition frequency (PRF) staggering and loss of target detectability for various values of Doppler frequency in the passband are presented. It is also shown that the product of variance of stagger periods and clutter variance is an important parameter determining the performance of a staggered PRF MTI radar.     

Radar synthetic vision system for adverse weather aircraft landing

A synthetic vision system (SVS) is described for aid in landing aircraft in poor weather conditions. The system consists of a scanning millimeter wave radar, heads-up display and real-time signal processing hardware. A suite of fast image processing algorithms are used for enhancing and displaying of the imagery. The system has been tested in number of tower and flight demonstration during actual adverse weather conditions. The significance of the work is in both system demonstration of the overall concept and the novelty of its signal processing algorithms     

Low-cost simulator for basic radar signals

Most modern radar simulators are costly and need cumbersome operations while used. Besides, they have many features not suitable for preliminary level. Basic training of radio monitoring personnel can be carried out with a simple and inexpensive system capable of producing both staggered and frequency hopping pulse radar signals with radiation pattern modulation. For operator convenience the system is programmed with basic programming language     

FM/AM Noise Test Set for a Pulsed Doppler Radar

A new test method to measure the amplitude noise and phase noise in both CW and pulsed CW signals of a Ku-band pulsed Doppler radar is described. These noises are measured in a simulated environment of radar operation; thus the test results may give direct information to determine radar subclutter visibility. In comparison with the conventional noise test method, this new method not only gives more meaningful results but also can obtain results much faster in testing. Actual test system design is described by block diagrams and theoretical analysis. A method to determine approximate frequency jitter in a transmitter signal is also described.     

Robust altitude estimation for over-the-horizon radar using a state-space multipath fading model

In previous work, a matched-field estimate of aircraft altitude from multiple over-the-horizon (OTH) radar dwells was presented. This approach exploits the altitude dependence of direct and surface reflected returns off the aircraft and the relative phase changes of these micro-multipath arrivals across radar dwells. Since this previous approach assumed high dwell-to-dwell predictability, it has been found to be sensitive to mismatch between modeled versus observed micro-multipath phase and amplitude changes from dwell-to-dwell. A generalized matched-field altitude estimate is presented here based on a state-space model that accounts for random ionospheric and target-motion effects that degrade the dwell-to-dwell predictability of target returns. The new formulation results in an efficient, robust recursive maximum likelihood (ML) estimation of aircraft altitude. Simulations suggest that the proposed technique can achieve accuracy within 5,000 ft of the true aircraft altitude, even with relatively high levels of uncertainty in modeling of dwell-to-dwell changes in the target return. A real data result is also presented to illustrate the technique.     

Constrained Improvement MTI Radar Processors

A new class of staggered PRF MTI radar processors is developed in this paper. These processors are constrained to achieve a specified value of MTI improvement and, subject to this constraint, minimize variations in processor response as a function of target Doppler frequency. The selection of both filter weights and PRF stagger sequences is discussed and a number of representative designs are presented.     

Control method for multi-input multi-output non-Gaussian random vibration test with cross spectra consideration

A control method for Multi-Input Multi-Output(MIMO) non-Gaussian random vibration test with cross spectra consideration is proposed in the paper. The aim of the proposed control method is to replicate the specified references composed of auto spectral densities, cross spectral densities and kurtoses on the test article in the laboratory. It is found that the cross spectral densities will bring intractable coupling problems and induce difficulty for the control of the multioutput kurtoses. Hence, a sequential phase modification method is put forward to solve the coupling problems in multi-input multi-output non-Gaussian random vibration test. To achieve the specified responses, an improved zero memory nonlinear transformation is utilized first to modify the Fourier phases of the signals with sequential phase modification method to obtain one frame reference response signals which satisfy the reference spectra and reference kurtoses. Then, an inverse system method is used in frequency domain to obtain the continuous stationary drive signals. At the same time, the matrix power control algorithm is utilized to control the spectra and kurtoses of the response signals further. At the end of the paper, a simulation example with a cantilever beam and a vibration shaker test are implemented and the results support the proposed method very well.