Current-fed multiresonant isolated DC-DC converter

A novel topology, current-fed multiresonant dc-dc converter (CF-MRC) was studied theoretically and experimentally. The new topology differs from previously described current-fed push-pull parallel-resonant topologies in the fact that the output is coupled to the current of the resonant inductor and in the addition of a second capacitor across the transformer. The main features of the proposed converter are an inherent protection against a short and open circuit at the output, a high voltage gain and zero voltage switching (ZVS) over a large range of output voltage. These characteristics make it a viable choice for applications, such as a high voltage capacitor charger, that require controllable current sourcing over a wide output voltage swing.     

AC/DC converter topologies for the Space Station

A new class of AC/DC converter topologies (Type-1 converters) is described, suitable for use in an advanced single-phase sine-wave voltage, high-frequency power distribution system, of the type that was proposed for a 20 kHz Space Station primary electrical power distribution system. The converter comprises a transformer, a resonant network, a current controller, a diode rectifier, and an output filter. The input AC voltage source is converted into a sinusoidal current source using the resonant network. The output of this current source is rectified by the diode rectifier and is controlled by the current controller. The controlled rectified current is then filtered by the output filter to obtain a constant voltage across the load. Three distinct converter topologies, Type-1A, Type-1B, and Type 1-C, are described, and their performance characteristics are presented. All three types have a close-to-unity rated power factor (greater than 0.98), low total harmonic distortion in input current (less than 5%), and high conversion efficiency (greater than 96%)     

Comparison of resonant topologies in high-voltage DC applications

Because of their tolerance of transformer nonidealities, resonant converters are considered to be well-suited to high-voltage applications. The series and parallel resonant topologies, as well as a newly discovered hybrid resonant topology are compared for high-voltage applications. Design criteria which incorporate transformer nonidealities are developed and used in the construction of high voltage prototypes for each topology. It is found that the parallel topology leads to the lowest peak switch current and the most ideal behavior     

基于不同拓扑结构的十二相同步发电机整流电压波形分析

传统中小功率十二相整流型同步发电机电压等级较低,整流装置通常采用4套不控整流单元并联结构。随着舰船中压直流综合电力技术的发展,整流发电系统的容量和电压等级大幅提升,十二相整流单元采用两并两串的拓扑结构可以适应发电机绕组较高的电压设计值,同时整流端中性线可引出用于电力推进调速装置的均压控制。分析了两并两串拓扑结构的不同联接组合型式,重点对两种可行的拓扑结构下的直流侧电压波形进行了解析计算,并通过仿真与试验验证了理论分析的正确性,证明了(Y1//Y3)+(Y2//Y4)拓扑结构为最优组合方式,具有最佳的直流电压品质。     

New ZVT-PWM DC/DC converters using active snubber

A novel active snubber soft switching method is proposed. The unique location of the resonant inductor and capacitor ensures low current and voltage stresses in the converter. An analytical study of a boost dc-dc converter with the proposed active snubber method is presented in detail to illustrate its operation principles and design considerations. By simple modification, this soft switching method is also suitable for ac-dc boost topology, especially for high power-factor-correction (PFC) universal interface applications. A 500 W prototype system has been made to simulatively and experimentally verify the performance of the soft switching.     

适用于航天领域的高效叠加式升压变换器

叠加式升压变换器（SBC）的部分功率不通过开关电路,而通过叠加支路直接供给负载,因此可实现较高的效率,适用于航天场合。为了避免输入输出电流断续,采用的变压器为双边磁化的隔离脉冲单元,它与电感、输出滤波电容以及叠加支路共同组成SBC变换器。根据电感位置的不同,分别提出了SBC-Ⅰ、SBC-Ⅱ和SBC-Ⅲ的基本结构与生成规则。基于生成规则推衍出9种SBC变换器,并从电流特性、输入输出电压关系、主电路传递函数、变压器的磁偏问题以及效率的角度对这9种变换器进行分析比较。最后选择一种性能最优的变换器,通过600 W的实验样机验证理论分析结果。     

永磁驱动重构型车载充电机三相DC/DC变流器的研究

提出了一种新型永磁驱动重构型车载充电机三相DC/DC变流器集成系统。该集成系统将永磁驱动的电机绕组和DC/AC逆变器重构成车载充电机实现电动汽车驱动-充电的集成,具有空间利用率高、充电快速和可靠性高等特点。分析了集成系统的结构和工作原理,推导了充电系统的三相DC/DC变换器数学模型。在此基础上,利用MATLAB/Simulink仿真软件搭建了驱动-充电集成系统仿真模型,对同步脉宽调制(PWM)控制和交错PWM控制策略进行仿真研究,分析对比了交流侧电压电流、直流侧电机绕组电感电流和直流侧电压波形。仿真结果表明,与交错PWM控制策略相比,同步PWM控制策略下该新型结构充电系统具有更好的运行性能。     

基于高功率因数控制的永磁同步电机无电解电容驱动系统控制策略

永磁同步电机无电解电容驱动系统因其成本与寿命的优势,在白色家电领域逐步得到广泛的应用。然而,由于使用小容量的薄膜电容取代大容量的电解电容,母线电压会以两倍工频波动,在母线电压处于波谷时,逆变器输出电压容易饱和,导致控制性能恶化,网侧电流畸变。因此,提出了一种基于高功率因数控制的转矩控制环和电压矢量修正策略,能够有效提升网侧功率因数,抑制网侧电流谐波并符合IEC 6100032标准。该算法的有效性通过仿真得以验证。     

基于UCC2810多路输出DC/DC模块的设计

介绍了双路输出、双路闭环控制脉宽调制器UCC2810的功能和电路设计、功率转换电路设计。与单路闭环控制或间接稳压方案相比较,采用UCC2810设计的双路输出DC/DC模块,从根本上消除了交叉调整率的影响,适用于负载不平衡的应用。具有功耗低、电路设计一致性好等优点。     

并联H桥DC/DC变换器软开关技术研究

与传统的Buck电路相比,基于H桥并联的DC/DC变换器可以实现电压的双极性输出和故障时的冗余控制,非常适合用于大功率电动机正反转控制的场合。分析了并联H桥型DC/DC变换器的结构组成和双脉宽调制(PWM)模式。为了降低双脉宽调制下H桥型DC/DC变换器的开通和关断损耗,对无源软开关技术进行了分析,重点探讨了RCD缓冲电路和最小应力缓冲电路之间的性能差异,指出最小应力软开关技术可以获得更好的软开关性能,并就将其用于双脉宽调制下的并联H桥DC/DC变换器进行了仿真研究。仿真结果表明:最小应力软开关技术用于双脉宽调制下并联H桥DC/DC变换器时,可以实现开关管的零电压开通和零电流关断。     

Bidirectional DC-to-AC inverter with improved performance

Switch-mode DC-to-AC inverters using DC-to-DC converter topology have many advantages over the traditional bridge-type inverter. A bidirectional power circuit combined with a nonlinear robust control is proposed to form a high performance inverter. The output voltage of the inverter can be stabilized regardless of large changes in input voltage and output current. The distortion near the zero crossing point can be minimized. The load of the inverter can be resistive, inductive, or capacitive. Simulation results and experimental verification are provided     

Power tracking for nonlinear PV sources with coupled inductor SEPIC converter

The photovoltaic (PV) generator exhibits a nonlinear i-v characteristic and its maximum power (MP) point varies with solar insolation. In this paper, a V2-based MP point tracking (MPPT) scheme is developed using a buck-boost transformation topology. Although several buck-boost transformation topologies are available we have considered here a coupled inductor SEPIC converter for experimentation. To achieve almost ripple-free array current we have used ripple steering phenomena with the help of integrated inductor. This integrated inductor not only reduces the magnetic core requirements but also improves converter performance. Mathematical models are formulated and tracking algorithm is evolved. A combined PV system simulation model is developed in the SIMULINK. For a given solar insolation, the tracking algorithm changes the duty ratio of the converter such that the solar cell array (SCA) voltage equals the voltage corresponding to the MP point. This is done by the tracking algorithm, which mainly computes the power proportional to square of terminal voltage and changes the duty ratio of the converter so that this power is maximum. The proposed algorithm is implemented in real-time with the help of Analog Device ADMC-401 DSP evaluation module. The tracking program is developed to perform experimental investigations using analog-to-digital converter (ADC) interrupt. Using this processor we are able to track the MP within 200 ms. The proposed peak power tracking effectiveness is demonstrated through simulation and experimental results.     

无刷直流电机高精度换相控制

针对无刷直流电机(BLDCM)换相期间不导通相续流而产生端电压脉冲的问题,依据反电动势(EMF)过零法原理,分析了端电压脉冲产生的原因及对反电动势过零检测精度的影响,提出了一种利用软件算法避开端电压脉冲从而实现无位置传感器BLDCM高精度换相的控制方法。首先,利用条件语句及程序运行时间差避开端电压脉冲；为了在重载情况下提高所设计程序运行时间差的容错率,提出一种减小换相续流时间的方法；最后,搭建了无传感器BLDCM试验平台对上述方法进行试验验证。试验结果证明了所提方法在不同占空比和负载下的有效性和准确性。     

300A标准恒流源的设计

介绍了一种采用高稳定度数模转换器作为电流输出控制,应用高准确度零磁通直流电流检测技术实现电流反馈的300 A标准恒流源设计方案。该恒流源具有10-300 A直流电流输出能力,最大输出功率为2400W,输出电流的最大允许误差为±（5×10-4设定值＋1个字）,稳定度为5×10-5/30m in。     

单端正激ZVT功率变换器实现

介绍一种单端正激工作方式的零电压过渡（ＺＶＴ）软开关ＤＣ－ＤＣ变换器;描述该变换器的原理和特征;给出了应用ＺＶＴ软开关技术和集成控制块ＳＧ３５２５Ａ的２４Ｖ／９ＡＤＣ－ＤＣ变换器电路和实验结果。     

Capacitive-loaded push-pull parallel-resonant converter

Results of a theoretical and experimental investigation of a capacitive-loaded push-pull parallel-resonant DC-DC converter (CL-PPRC) are presented and discussed. The push-pull parallel-resonant converter (PPRC) is driven by a lower-than-resonance frequency and the secondary voltage is rectified and smoothed by a capacitive filter. The CL-PPRC is shown to operate in the zero voltage switching (ZVS) mode with a boost-like DC transfer ratio that is approximately linear with the period of the switching frequency. Experimental results of a 180 W, high output voltage (1.8 KV) prototype are found to be in good agreement with the analysis, models, and simulation results presented. The basic characteristic of ZVS, the fact that the resonant current is passing through the switches only during a fraction of the period, the high-voltage transfer ratio, and the inherent input/output (I/O) isolation, make the proposed topology a viable design alternative in avionic and aerospace applications     

串联输出DC／DC谐振变换器的稳态分析

分析了高于谐振频率工作的串联输出谐振变换器的工作模式,采用状态变量法计算获得了若干描述稳态工作的特性曲线,为分析和设计这种变换器提供了基础     

交直流共用主电路及其控制方法在双输出航空静变电源中的应用

详细介绍一种通过交直流变换共用主电路实现同一电源双路分时输出的方法,给出了交直流共用主电路的拓扑结构及其工作原理,分析了交流变换五电平载波移相及直流变换级联移相控制策略。为了在三相交流变换电路的基础上实现大功率直流输出,并兼顾各相功率均衡,提出了一种相位角同步的均流控制策略。最后通过试验实现了同一电源分时输出交流115 V/400 Hz/100 kVA和直流270 V/80 kW,验证了所述拓扑结构和控制策略的合理性与可行性。     

双Buck半桥逆变器输入电容电压脉动的分析

双Buck逆变器(DBI)是航空静止变流器(ASIs)的常用拓扑,从双Buck半桥逆变器(DBHBIs)两直流电感中分离出交流电感使得体积、重量进一步减小。在正常工作,尤其是负载短路情况下,双Buck半桥逆变器输入侧电容上的电压产生与输出同频的脉动。以交流电感分立的双Buck半桥逆变器为例,分析了在额定负载、短路、级联工作等情况下输入电容电压脉动的产生原因,给出了该脉动的定量计算方法,并由此得出了输入侧电容容值的选择依据。最后通过仿真和实验,验证了文中分析的正确性。该分析方法同样适用于其他半桥型逆变器拓扑。     

Suitability of pulse train control technique for BIFRED converter

Pulse Train/spl trade/ control scheme is presented and applied to a boost integrated flyback rectifier/energy storage dc-dc (BIFRED) converter operating in discontinuous conduction mode (DCM), which avoids the light-load high-voltage stress problem. In contrast to the conventional control techniques, the principal idea of Pulse Train technique is to regulate the output voltage using a series of high and low energy pulses generated by the current of the inductor. The applicability of the proposed technique to both the input and magnetizing inductances of BIFRED converter is investigated. Analysis of BIFRED converter operating in DCM as well as the output voltage ripple estimation is given. Experimental results on a prototype converter are also presented.