SAR image formation via semiparametric spectral estimation

A new algorithm, referred to as the SPAR (Semiparametric) algorithm, is presented herein for target feature extraction and complex image formation via synthetic aperture radar (SAR). The algorithm is based on a flexible data model that models each target scatterer as a two-dimensional (2-D) complex sinusoid with arbitrary unknown amplitude and constant phase in cross-range and with constant amplitude and phase in range. By attempting to deal with one corner reflector, such as one dihedral or trihedral, at a time, the algorithm can be used to effectively mitigate the artifacts in the SAR images due to the flexible data model. Another advantage of SPAR is that it can be used to obtain initial conditions needed by other parametric target feature extraction methods to reduce the total amount of computations needed. Both numerical and experimental examples are provided to demonstrate the performance of the proposed algorithm     

Moving Targets Processing in SAR Spatial Domain

This paper presents a novel technique to estimate the initial coordinates and velocity vector of moving targets, including those with velocities above the Nyquist limit, using a single synthetic aperture radar (SAR) sensor without increasing the pulse repetition frequency (PRF). The basic reasoning is that, although the returned echoes may be undersampled in the azimuth direction, their phase and amplitude are informative with respect to the moving target trajectory parameters. Therefore, the so-called blind angle ambiguity, inherent to systems using a single SAR sensor, is overcome. The proposed method samples the data in the spatial domain, along the signature curve which depends on the moving target trajectory parameters. The resulting algorithm is a highly efficient (from the computational point of view) ID matched filter. The effectiveness of the proposed scheme is illustrated using simulated SAR data and real data from the MSTAR public release data set, corresponding to a static SAR scene and a static BTR-60 with simulated motion.     

Simultaneous ISAR imaging of group targets flying in formation

This paper proposes a novel inverse synthetic aperture radar(ISAR) imaging method based on second-order keystone transform(KT) and Sandglass transform for group targets flying in a formation with constant accelerated rectilinear motion in the same radar beam. First, range curvature and range walk of each sub-target among group targets are corrected by the second-order KT combined with the quadratic phase term compensation. After range alignment, the signals in each range frequency cell can be modelled as multiple chirp signals and then the Sandglass transform is utilized to cross-range imaging, which transforms the time–frequency distribution of the signals in each range frequency cell into beelines parallel to the slow time axis simultaneously. Finally, cross-range profiles of group targets in each range frequency cell are obtained via a projection of the perk of every scatterer in the two-dimensional accumulation plane onto the frequency axis. The advantage of the proposed method is that it can align range profiles of each sub-target simultaneously and image cross-range profiles directly without separating the returned signals, which simplifies the operation procedure. Simulation results are used to demonstrate the effectiveness of the proposed method.     

Detecting moving targets in SAR imagery by focusing

A new method for detecting moving targets in a synthetic aperture radar (SAR) image is presented. It involves segmenting a complex-valued SAR image into patches, focusing each patch separately, and measuring the sharpness increase in the focused patch. The algorithm is sensitive to azimuth velocities and is exquisitely sensitive to radial accelerations of the target, allowing it to detect motion in any direction. It is complementary to conventional Doppler-sensing moving target indicators, which can sense only the radial velocity of rapidly moving targets.     

利用分数阶Fourier域滤波的机载SAR多运动目标检测

 强度相差较大的多运动目标检测是机载合成孔径雷达 ( SAR)技术的一个重点和难点,传统的频域滤波和现代的时频分布方法都无法解决这个问题。首先分析了机载 SAR运动目标回波本质上为线性调频信号,据此提出一种基于分数阶 Fourier域滤波的运动目标检测新方法,并且应用逐次消去的思想有效地解决了强度相差较大的多目标检测问题。仿真的结果验证了算法的有效性。     

一种新的广义Gamma分布下的SAR图像目标检测算法

针对合成孔径雷达(SAR)图像舰船目标检测中全局广义Gamma分布虚警数量较多的问题,文章采用了一种新的基于核密度估计(KDE)的广义Gamma分布下的SAR图像舰船目标检测算法。新的算法结合了SAR图像的强度分布和空间散布分布,形成新的组合分布。在组合分布的基础上,完成SAR图像目标检测。首先,介绍了广义Gamma的分布模型;然后,通过核密度估计的方法估计各像素点的散布分布,结合散布分布和强度分布形成组合分布,对组合分布采用SISE方程的方法估计广义Gamma分布的参数,根据确定的广义Gamma分布的表达式,求出阈值T的解析式。通过求解逆不完全Gamma函数得到检测阈值,进而完成舰船目标的检测。通过实测SAR图像检测实验,对比文章算法与双参数检测算法和基于广义Gamma分布检测算法,验证了该算法的适用性。     

Interacting acceleration compensation algorithm for trackingmaneuvering targets

The two-stage Kalman estimator has been studied for state estimation in the presence of random bias and applied to the tracking of maneuvering targets by treating the target acceleration as a bias vector. Since the target acceleration is considered a bias, the first stage contains a constant velocity motion model and estimates the target position and velocity, while the second stage estimates the target acceleration when a maneuver is detected, the acceleration estimate is used to correct the estimates of the first stage. The interacting acceleration compensation (IAC) algorithm is proposed to overcome the requirement of explicit maneuver detection of the two-stage estimator. The IAC algorithm is viewed as a two-stage estimator having two acceleration models: the zero acceleration of the constant velocity model and a constant acceleration model. The interacting multiple model (IMM) algorithm is used to compute the acceleration estimates that compensate the estimate of the constant velocity filter. Simulation results indicate the tracking performance of the IAC algorithm approaches that of a comparative IMM algorithm while requiring approximately 50% of the computations     

Multiple model particle flter track-before-detect for range ambiguous radar

The middle pulse repetition frequency（MPRF）and high pulse repetition frequency（HPRF）modes are widely adopted in airborne pulse Doppler（PD）radar systems,which results in the problem that the range measurement of targets is ambiguous.The existing data processing based range ambiguity resolving methods work well on the condition that the signal-to-noise ratio（SNR）is high enough.In this paper,a multiple model particle flter（MMPF）based track-beforedetect（TBD）method is proposed to address the problem of target detection and tracking with range ambiguous radar in low-SNR environment.By introducing a discrete variable that denotes whether a target is present or not and the discrete pulse interval number（PIN）as components of the target state vector,and modeling the incremental variable of the PIN as a three-state Markov chain,the proposed algorithm converts the problem of range ambiguity resolving into a hybrid state fltering problem.At last,the hybrid fltering problem is implemented by a MMPF-based TBD method in the Bayesian framework.Simulation results demonstrate that the proposed Bayesian approach can estimate target state as well as the PIN simultaneously,and succeeds in detecting and tracking weak targets with the range ambiguous radar.Simulation results also show that the performance of the proposed method is superior to that of the multiple hypothesis（MH）method in low-SNR environment.     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

Design of a practical tracking algorithm with radar measurements

The extended Kalman filter (EKF) has been widely used as a nonlinear filtering method for radar tracking problems. However, it has been found that if cross-range measurement errors of the target position are large, the performance of the conventional EKF degrades considerably due to nonnegligible nonlinear effects. A new filtering algorithm for improving the tracking performance with radar measurements is developed based on the fact that correct evaluation of the measurement error covariance is possible in the Cartesian coordinate system. The proposed algorithm may be viewed as a modification of the EKF in which the variance of the range measurement errors is evaluated in an adaptive manner. The filter structure facilitates the incorporation of the sequential measurement processing scheme, and this makes the resulting algorithm favorable to both estimation accuracy and computational efficiency. Computer simulation results show that the proposed method offers superior performance in comparison to previous methods. Moreover, our developed algorithm provides some useful insight into the radar tracking problem     

自寻的导弹攻击机动目标的最优制导规律的研究及实现

提出一种适用于红外和雷达自寻的制导导弹的适应性强、制导精度高、易实现的最优制导规律。为解决工程实现的关键问题,提出了目标机动加速度模型。根据该模型并利用导弹导引头的AGC信号或雷达测距信号,给出了目标机动加速度、导弹与目标相对距离和距离变化率的估计算法。     

一种FMCW SAR地面运动目标谱图域参数估计方法

对调频连续波(FMCW)合成孔径雷达(SAR)地面运动目标的参数估计方法进行了研究,采用相位中心偏置天线(DPCA)技术对地杂波进行抑制,分析了载机及地面运动目标连续运动对回波信号的影响,推导了采用DPCA技术引入的回波慢时间包络(STE)项与地面运动目标参数之间的关系。在此基础上,提出了一种地面运动目标谱图域参数估计方法,该方法首先利用Radon变换在谱图域估计导致回波信号距离走动的目标等效径向速度,并对距离走动进行校正;其次,在谱图域中提取运动目标回波幅度,根据STE项引起的回波幅度变化与目标方位向速度之间的关系,估计目标的方位向速度,并进一步求解相应的目标径向速度。所提方法能够在谱图域完成地面运动目标二维速度估计,最后的仿真实验验证了所提方法的有效性和可行性。     

基于自适应IMM的高超声速飞行器轨迹预测

为了给基于预测命中点法的高超声速飞行器中制导拦截提供先验知识,提出高超声速飞行器的轨迹预测方法。首先,给出高超声速环境下与目标姿态近似线性的气动参数;其次,针对气动参数作控制量的运动模型,设计自适应交互多模型（IMM）跟踪算法,并进行性能有效性验证;然后,根据气动参数特性和目标假设机动方式,设计基于最小二乘拟合的轨迹预测方法。通过对目标轨迹进行跟踪和预测仿真,预测100 s的位置误差均小于5 km,速度误差均小于100 m/s,结果表明基于自适应IMM的轨迹预测方法对有规律机动的目标进行轨迹预测,效果良好。     

机动目标“当前”统计模型与自适应跟踪算法

本文提出机动目标“当前”统计模型的概念并建议用修正的瑞利-马尔科夫过程描述目标随机加速机动的统计特性。文中指出了在机动目标运动模型中状态（机动加速度）估值与状态噪声之间的内在联系。在此基础上提出了具有机动加速度均值及方差自适应的卡尔曼滤波算法。对一维和三维的情形进行了计算机模拟。计算结果表明,在仅对目标位置进行观测的情况下,这类自适应估值算法无论对高度机动或无机动的目标均可绘出较好的位置、速度及加速度估值。     

Rao-Blackwellized粒子概率假设密度滤波算法

针对多目标跟踪（MTT）,提出一种新的基于随机集的滤波算法,称为Rao-Blackwellized粒子概率假设密度滤波算法（RBP-PHDF）。算法运用Rao-Blackwellized思想,通过挖掘分析“混合线性/非线性模型”的结构,采用序列蒙特卡罗（SMC）方法预测与估计概率假设密度（PHD）迭代式中各个目标的非线性状态,并利用非线性状态粒子中包含的信息,使用卡尔曼滤波器（KF）对线性状态进行预测与估计。以更好地估计PHD进而提高各目标状态估计精度。分析与MTT仿真的结果表明,在相同的仿真条件下,与现有序列蒙特卡罗概率假设密度滤波算法（SMC-PHDF）相比,RBP-PHDF在降低粒子维数、减少计算量的同时,有效提升了估计精度。     

Modified input estimation technique using pseudoresiduals

An adaptive tracking filter for maneuvering targets is proposed using modified input estimation technique. Pseudoresiduals are defined using measurements and the velocity estimate at the hypothesized maneuver onset time. With the pseudoresiduals and a new target model representing transitions of nominal accelerations, a new input estimation method for tracking a maneuvering target is derived. Since the proposed detection technique is more sensitive to maneuvers than previous work, the shorter window length can be employed to detect and compensate target maneuvers. Also shown is that the tracking performance of the proposed filter is similar to that of interacting multiple model method (IMM) with 3 models, while computational loads of our method are drastically reduced     

An improved multiple model GM-PHD filter for maneuvering target tracking

In this paper, an improved implementation of multiple model Gaussian mixture probability hypothesis density (MM-GM-PHD) filter is proposed. For maneuvering target tracking, based on joint distribution, the existing MM-GM-PHD filter is relatively complex. To simplify the filter, model conditioned distribution and model probability are used in the improved MM-GM-PHD filter. In the algorithm, every Gaussian components describing existing, birth and spawned targets are estimated by multiple model method. The final results of the Gaussian components are the fusion of multiple model estimations. The algorithm does not need to compute the joint PHD distribution and has a simpler computation procedure. Compared with single model GM-PHD, the algorithm gives more accurate estimation on the number and state of the targets. Compared with the existing MM-GM-PHD algorithm, it saves computation time by more than 30%. Moreover, it also outperforms the interacting multiple model joint probabilistic data association (IMMJPDA) filter in a relatively dense clutter environment.     

基于序列图像的航天器自主导航降维滤波方法

非合作目标的运动感知与状态估计,是太空领域技术发展的重要组成部分。非合作目标相对状态的精确估计是相对导航的难点问题。传统的非合作目标扩展卡尔曼滤波算法需要结合非合作目标的质心位置,增加了状态变量的维数,提高了系统不确定性,从而会影响状态扩展卡尔曼滤波的收敛速度。提出了一种基于序列图像的非合作目标相对导航方法,该方法在不对质心进行估计的情况下首先对非合作目标姿态进行估计,在完成非合作目标姿态估计后再对其质心进行估计。本文推导了光学相机测量值与目标真实姿态的关系,构建了基于序列图像的测量模型,分别建立了不含有非合作目标质心位置的状态方程和基于非合作目标位置、速度矢量的状态方程,设计了适用于非合作目标状态估计的扩展卡尔曼滤波算法。仿真实验表明该方法可在10 Hz采样频率下经过50次采样（即5 s）内快速收敛,从而有利于空间飞行器的在轨服务与维护。     

方位扫描SAR区域成像研究

研究在SAR区域成像中,通过天线波束方位扫描扩大成像区方位宽度的机理以及信号处理方法。首先描述天线波束扫描的几何关系,推导出为达到要求的成像分辨率以及成像区方位宽度所需的天线波束扫描角速度和扫描角度的计算公式。分析了成像区位置与载机航迹的几何关系。然后讨论方位扫描SAR区域成像信号处理方法,并给出系统点目标响应仿真结果。最后,用试飞实测数据成像做了验证。     

A Velocity Estimation Algorithm of Moving Targets using Single Antenna SAR

A new algorithm is proposed for velocity estimation of moving targets in single antenna synthetic aperture radar (SAR). Based on the fact that different velocity vectors cause different geometrical figures of the two-dimensional (2-D) signature in the range-Doppler (RD) domain, this algorithm estimates the azimuth and range velocities by a 2-D search such that the range cell migration correction (RCMC) and the second range compression (SRC) are correctly performed. It is shown that, using the proposed algorithm, the Doppler ambiguity problem can be avoided and satisfactory accurate velocity estimation can be obtained in high signal-to-clutter ratio (SCR) scenarios.