追踪星跟踪空间非合作目标的相对轨道设计

对空间非合作目标跟踪飞行可以执行观测或监视等任务。首先从一般性出发对追踪星与非合作目标之间的椭圆轨道相对运动方程进行分析,给出具有任意初始条件的相对运动方程解析表达式。其次,对追踪星沿航向跟踪目标并考虑约束条件时的相对轨道设计进行分析后,给出设计追踪星轨道的方法,该方法使得追踪星在保持对地定向的同时也满足测量敏感器的约束条件。最后通过数学仿真进行了验证。     

Mission analysis and systems design of a near-term and far-term pole-sitter mission

This paper provides a detailed mission analysis and systems design of a near-term and far-term pole-sitter mission. The pole-sitter concept was previously introduced as a solution to the poor temporal resolution of polar observations from highly inclined, low Earth orbits and the poor high-latitude coverage from geostationary orbit. It considers a spacecraft that is continuously above either the north or south pole and, as such, can provide real-time, continuous and hemispherical coverage of the polar regions. Being on a non-Keplerian orbit, a continuous thrust is required to maintain the pole-sitter position. For this, two different propulsion strategies are proposed, which result in a near-term pole-sitter mission using solar electric propulsion (SEP) and a far-term pole-sitter mission where the SEP thruster is hybridized with a solar sail. For both propulsion strategies, minimum propellant pole-sitter orbits are designed. In order to maximize the spacecraft mass at the start of the operations phase of the mission, the transfer from Earth to the pole-sitter orbit is designed and optimized assuming either a Soyuz or an Ariane 5 launch. The maximized mass upon injection into the pole-sitter orbit is subsequently used in a detailed mass budget analysis that will allow for a trade-off between mission lifetime and payload mass capacity. Also, candidate payloads for a range of applications are investigated. Finally, transfers between north and south pole-sitter orbits are considered to overcome the limitations in observations due to the tilt of the Earth's rotational axis that causes the poles to be alternately situated in darkness. It will be shown that in some cases these transfers allow for propellant savings, enabling a further extension of the pole-sitter mission.     

A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

Orbital manoeuvres of free flying platforms for retrieval by space shuttle

In a typical future mission a free flying platform will be released to space by Space Shuttle. After performing its active mission, it will have to wait for a suitable later Shuttle flight for retrieval at its original orbital altitude. To allow for the orbital descent during the total mission time of typically several months, one or several orbit raise manoeuvres have to be performed with the platform's own propulsion system. In the paper, the velocity-requirements Δv for these orbital transfers, depending on Sun activity, rendezvous-altitude, ballistic coefficient and longest expected mission time are treated.The simplest manoeuvre, consisting of one initial ascent transfer and one descent transfer at the actual retrieval date, is shown to be not optimal. Up to 25% of Δv can be saved, if several orbit raising transfers in a certain sequence are applied. A straightforward analytical treatment is presented for the optimization, while a computer program with the CIRA-atmosphere model is used for actual mission planning.     

Preliminary assessment of a small robotic rover for Titan exploration

Titan is a very interesting target in deep space exploration. With its solid surface on which a rover can easily travel and its methane lakes which can be sailed it is the ideal target for a deep space mission which includes a mobile platform. In the present paper the general layout of a rover for a mission to Titan is studied, dealing with the mobility, power generation and trajectory control issues. A four-wheels configuration with slip steering was chosen; to compare this solution with the more conventional strategy based on steering wheels, simulations were performed on some trajectories computed through the well known ‘potential’ method, using both slip steering and conventional steering control, for different vehicle speeds. The comparison between the simulated trajectories allows to state the adequateness of the proposed approach.The results here obtained apply not only to a future mission to Titan, but also to other missions designed for the exploration of the satellites of the outer planets having a size comparable with that of Titan and the largest Kuiper belt objects like Pluto and 136472 Makemake.     

嫦娥五号平动点拓展任务轨道方案研究

中国嫦娥五号探测器成功实现月球采样返回任务,为最大限度利用任务资源,研究了利用嫦娥五号轨道器的平动点拓展任务轨道方案,设计了平动点轨道及其转移轨道.首先,给出了任务轨道设计的轨道动力学模型,包括圆型限制性三体问题模型和精确力模型.其次,基于嫦娥二号和嫦娥5T1平动点拓展任务设计经验,介绍了平动点轨道直接转移与入轨等轨道...     

载人小行星探测的任务特点与实施途径探讨

介绍了载人小行星探测的发展现状,对目前美国基于"猎户座"飞船的载人小行星探测的概要方案进行了描述,包括探测器系统组成、运载火箭和飞行方案等内容。从速度增量、目标星引力等方面,分析了载人小行星探测的任务特点,并与载人火星探测、载人月球探测以及无人小行星探测的任务特点进行了比较。给出了载人小行星探测的实施途径建议,包括目标星选择、载人飞船系统设计等。讨论了其所涉及的推进、星际飞行安全保障、小行星表面行走等关键技术。研究结果可为我国开展载人深空探测提供参考。     

Opportunity options for rendezvous,flyby and sample return mission to different spectral-type asteroids for the 2015–2025

The feasible rendezvous, flyby and sample return mission scenario to different spectral-type asteroids for the 2015–2025 are investigated. The emphasis is put on the potential target selection and the design of preliminary interplanetary transfer trajectory in this paper. First, according to different scientific motivations, some potential targets with different spectral-type and physical property are selected. Then, some optimal rendezvous and sample return opportunities for different spectral-type asteroids are presented by using pork-chop plots method and Sequential Quadratic-Programming (SQP) algorithm. In order to reduce the launch energy and total velocity increments for sample return mission, the Earth swingby strategy is used. In addition, the feasible trajectory profiles of flyby and rendezvous with two different spectral-type asteroids in one mission are discussed. A hybrid optimization method combing the Differential Evolution (DE) algorithm and SQP algorithm is introduced as a trajectory design method for the mission. Finally, some important parameters of transfer trajectory are analyzed, which would have a direct impact on the design of spacecraft subsystem, such as communication, power and thermal control subsystem.     

面向木星卫星交会任务的探测器飞行路径规划

针对探测器在木星系统内多次借力的飞行路径和轨道优化设计问题,提出了一种基于三层优化思想的飞行路径规划方法,该方法可根据给定的任务约束和交会目标,自动搜索探测器在木星系统内的借力飞行序列,同时完成标称飞行轨道的优化设计。首先,文章在给定轨道动力学模型和木卫借力模型基础上,建立了面向木卫交会任务的两次借力飞行轨道优化设计模型和求解方法;然后,采用结合遗传算法、全局遍历和贪婪算法的三层优化设计思路,给出了一种环木飞行路径规划方法;最后,以木星四颗卫星的交会任务为例进行了仿真分析。仿真结果表明：针对木卫的交会任务,探测器速度增量需求随木卫借力次数的增多,呈现先显著减小后逐渐增大的现象;探测器采用多次木卫借力的策略,可显著降低探测器的速度增量需求;探测器速度增量达到最优之后,借力目标收敛于交会目标,且速度增量随借力次数的进一步增多而逐渐增大。     

基于专家系统理念的航天器特殊控温策略推理测试验证

针对热控设计中某些特殊自主控温策略与任务背景、空间环境以及被控对象参数之间耦合度强,不易通过传统地面综合测试方法提前验证其正确性与合理性的难题,结合“嫦娥五号”月球探测任务推进贮箱温度需求及其特殊自主控温策略设计过程,构建出一种基于综合测试与热控设计专家知识的推理评测方法,并利用优化后的测试用例进行了验证。结果表明:第1版控温策略能够实现减小各贮箱之间温差的预期目标,但对具体任务背景适应性不足;在给出控制策略优化完善建议后,控温策略可同时满足温差要求和引入能量最小原则,实现了“初始设计—测试验证—完善改进”的优化闭环研制模式。     

Application of SDRE technique to orbital and attitude control of spacecraft formation flying

This paper proposes the application of a nonlinear control technique for coupled orbital and attitude relative motion of formation flying. Recently, mission concepts based on the formations of spacecraft that require an increased performance level for in-space maneuvers and operations, have been proposed. In order to guarantee the required performance level, those missions will be characterized by very low inter-satellite distance and demanding relative pointing requirements. Therefore, an autonomous control with high accuracy will be required, both for the control of relative distance and relative attitude. The control system proposed in this work is based on the solution of the State-Dependent Riccati Equation (SDRE), which is one of the more promising nonlinear techniques for regulating nonlinear systems in all the major branches of engineering. The coupling of the relative orbital and attitude motion is obtained considering the same set of thrusters for the control of both orbital and attitude relative dynamics. In addition, the SDRE algorithm is implemented with a timing update strategy both for the controller and the proposed nonlinear filter. The proposed control system approach has been applied to the design of a nonlinear controller for an up-to-date formation mission, which is ESA Proba-3. Numerical simulations considering a tracking signal for both orbital and attitude relative maneuver during an operative orbit of the mission are presented.     

First results of PRECISE—Development of a MEMS-based monopropellant micro chemical propulsion system

PRECISE focuses on the research and development of a MEMS-based monopropellant micro chemical propulsion system for highly accurate attitude control of satellites. The availability of such propulsion systems forms the basis for defining new mission concepts such as formation flying and rendezvous manoeuvres. These concepts require propulsion systems for precise attitude and orbit control manoeuvrability. Application-oriented aspects are addressed by two end-users who are planning a formation flying mission for which the propulsion system is crucial. Basic research is conducted aiming at improving crucial MEMS technologies required for the propulsion system. Research and development also focuses on the efficiency and reliability of critical system components. System analysis tools are enhanced to complement the development stages. Finally, the propulsion system will be tested in a simulated space vacuum environment. These experiments will deliver data for the validation of the numerical models.     

临近空间高超声速飞行器测控通信的需求及策略分析

对运行在临近空间的高超声速飞行器,由于其速度快、加速度大、距离跨度大等特点,对其试验及运行过程中的遥测遥控通信问题是一个关键难题。从临近空间的概念、特点出发,结合高超声速飞行器飞行状态、环境,分析了对试验过程中测控通信技术的需求,给出了分析结论及初步应对策略,可对有关高超声速飞行器的测控系统设计提供参考输入。     

Optimal reconfiguration maneuvers for spacecraft imaging arrays in multi-body regimes

Upcoming National Aeronautics and Space Administration (NASA) mission concepts include satellite arrays to facilitate imaging and identification of distant planets. These mission scenarios are diverse, including designs such as the terrestrial planet finder-occulter (TPF-O), where a monolithic telescope is aided by a single occulter spacecraft, and the micro-arcsecond X-ray imaging mission (MAXIM), where as many as 16 spacecraft move together to form a space interferometer. Each design, however, requires precise reconfiguration and star tracking in potentially complex dynamic regimes. This paper explores control methods for satellite imaging array reconfiguration in multi-body systems. Specifically, optimal nonlinear control and geometric control methods are derived and compared to the more traditional linear quadratic regulators, as well as input state feedback linearization. These control strategies are implemented and evaluated for the TPF-O mission concept.     

Mission design and analysis of European astrophysics missions orbiting libration points

The main characteristics of the trajectory design of space observatory missions in the Earth–Sun libration point region is highlighted, based on experiences gained in work performed by the authors on ESA missions. Free transfers always lead to large-amplitude orbits around L₂, their properties (amplitudes, phases, non-linear behaviour) are related to the conditions at perigee. Launch scenarios with different degrees of freedom in the perigee geometry and different strategies of sharing the apogee raising between launcher and spacecraft propulsion for Soyuz (with circular parking orbit or direct injection) and Ariane 5 launches from French Guiana will be discussed. Besides the orbit selection and transfer analysis, an important aspect of libration missions is the maintenance of the operational orbit. For some missions it is required to maximise the time between maintenance manoeuvres, and for some the thrust authority is limited. In both cases the exponential nature of the state transition matrix has to be considered. If the equivalent velocity error in the unstable direction becomes too large, the orbit can become unrecoverable, leading to a departure from the environment of the Lagrange point within a few months.     

Optimal reconfiguration maneuvers for spacecraft imaging arrays in multi-body regimes

Upcoming National Aeronautics and Space Administration (NASA) mission concepts include satellite arrays to facilitate imaging and identification of distant planets. These mission scenarios are diverse, including designs such as the terrestrial planet finder-occulter (TPF-O), where a monolithic telescope is aided by a single occulter spacecraft, and the micro-arcsecond X-ray imaging mission (MAXIM), where as many as 16 spacecraft move together to form a space interferometer. Each design, however, requires precise reconfiguration and star tracking in potentially complex dynamic regimes. This paper explores control methods for satellite imaging array reconfiguration in multi-body systems. Specifically, optimal nonlinear control and geometric control methods are derived and compared to the more traditional linear quadratic regulators, as well as input state feedback linearization. These control strategies are implemented and evaluated for the TPF-O mission concept.     

Design-to-Cost Applied Within an Integrated System Model

In an environment of declining financial budgets for space projects, new approaches - such as Design-To-Cost - are being implemented to improve today's satellite design processes. Using an example of a current mission (the power subsystem of the Solar Probe spacecraft) under study at NASA's Jet Propulsion Laboratory, the main part of the paper discusses an Integrated System Model (structured into a performance model, a cost model, and an effectiveness model) that is part of a model-based design process used to perform cost-effectiveness trades. A simulation tool is used during the first step to size the components of the power subsystem, and then simulate its performance during operation. The determined dimensions are transferred into an EXCEL^TM-spreadsheet and linked to the components' costs. With a cost accounting tool that combines cost estimating relationships with the Work Breakdown Structure of the power subsystem, the life-cycle cost of each alternative design concept is computed. To determine the cost-risk of the different design alternatives for each component, cost probability distributions are introduced. By performing Monte-Carlo simulations, cost sensitivities are revealed. In the next step of the trade study process, the effectiveness of the alternatives is analyzed. Having determined cost and effectiveness, estimates can be made for where the different alternatives lie in the design space. The last part of the paper identifies the main drivers for the spacecraft's performance and cost. Finally it is shown how the mission design benefited from the Integrated System Model and from the application of Design-To-Cost.     

空间机械臂抓取目标动力学与寻的制导控制

针对安装有两连杆机械臂的航天器对地球圆轨道上的空间目标已形成自由绕飞（即满足齐次C-W方程）的情形,研究通过机械臂抓取该目标的系统动力学建模与制导控制问题。在目标固连旋转参考系下,运用非惯性系下的拉格朗日分析力学,建立了两连杆机械臂系统动力学方程。忽略惯性耦合影响,对模型进行了合理简化,在此基础上设计了机械臂末端执行器即机械手抓取目标的寻的制导控制规律。然后代入原始复杂模型,进行数值仿真校验。结果表明,在机械臂载体自由绕飞空间目标的条件下,机械手能够准确地抓住目标。     

Design and development of correlation techniques to maintain a space surveillance system catalogue

A growing interest exists in a future, autonomous European Space Surveillance System (ESSS). Currently, most of the knowledge about Earth-orbiting space objects is based on information provided by the USASPACECOM. This paper presents the required initial orbit determination (IOD) and correlation techniques to process optical measurements. Former studies were focused on the handling of radar measurements, which are summarised with the aim of describing a global procedure for processing hybrid measurement types (combination of radar and optic data for catalogue maintenance). The introduction of manoeuvres are presented due to their importance in the space object catalogue maintenance.The detection of uncatalogued objects and the successful correlation of already catalogued objects involve two different tasks for telescopes: survey and tasking. Assumptions for both strategies are developed on the basis of the previous work developed at the University of Berne (see [T. Flohrer, T. Schildknecht, R. Musci, E. Stöveken, Performance estimation for GEO space surveillance, Advances in Space Research 35 (2005). [1]; T. Flohrer, T. Schildknecht, R. Musci, Proposed strategies for optical observations in a future European Space Surveillance Network, presented in the 36th COSPAR Scientific Assembly (2006). [2]; R. Musci, T. Schildknecht, M. Ploner, Orbit improvement for GEO objects using follow-up observations, Advances in Space Research 34 (2004). [3]; R. Musci, T. Schildknecht, M. Ploner, G. Beutler, Orbit improvement for GTO objects using follow-up observations, Advances in Space Research 35 (2005). [4]; R. Musci, T. Schildknecht, T. Flohrer, G. Beutler, Concept for a catalogue of space debris in GEO, Proceedings of the Fourth European Conference on Space Debris, (ESA SP-587, 2005). [5]]). When a new object appears in the field of view, initial orbit determination must be performed. When only one telescope per site is available, the initial measurements are separated by only a few seconds. Therefore, the initial orbit determination is quite inaccurate due to bad mathematical conditioning of the problem. In order to improve the accuracy of the initial orbit determination, several follow-up observations of the object are required. This implies that the telescope needs to track the detected objects over a long period, and therefore the time available for surveying is reduced. By processing the additional follow-up measurements, separated now by a few hours, the initial orbit determination gives more accurate results and the object can be recovered after an orbital revolution. When several telescopes per site are available, the optical strategies may be modified. The survey tasks can be distributed between the available telescopes. In this way the number of images corresponding to each object increases and to track the detected object over long periods is not always needed. Numerical results will be shown in order to evaluate the accuracy and features of the different telescope strategies. A key point for performing efficiently the cataloguing process is the calculation of the estimated state vector covariance matrix. The covariance matrix analysis allows an adaptive tasking-survey telescope scheduling. Moreover, the implementation of a proper batch orbit determination process by means of a square root information filter (SRIF) requires a realistic initial covariance matrix.Hybrid measurements are available from objects that can be observed through both radar and optical sensors (e.g. GTO objects). The batch orbit determination and correlation process of hybrid measurements is also based on SRIF using an extended measurement model. Both the initial orbit determination methods using radar and optical measurements have to be sufficiently accurate to initialise SRIF correctly. In order to avoid filter divergence, the estimated covariance must be correctly updated after processing both kinds of measurements. The implemented algorithms are explained and their performance is shown through realistic simulations.Techniques to detect and characterise object manoeuvres during the cataloguing process have been developed and implemented. Four main groups of manoeuvre objects have been established by means of their observed permitted orbital ranges (GEO, LEO, MEO–GPS, Molniya). The study is based on the historical TLEs files. When an object with an uncatalogued orbit appears, a comparison between the new orbit and the orbits contained in the permitted ranges of one of the manoeuvre groups is performed. If the required Δa and/or Δi to convert the lost orbit into the detected orbit seems to be feasible, a manoeuvre will be identified and the orbit will be updated in the catalogue. Otherwise, it will be decided that a new object was found. For this purpose, a procedure to estimate the manoeuvres and reset orbits have been developed.