基于改进型CFAR的SAR图像目标检测算法

针对传统的双参数恒虚警率(Constant False Alarm Rate,CFAR)算法存在的虚警率高、实现过程繁琐、算法执行效率低等问题,提出了一种改进型的CFAR检测算法。该算法根据SAR图像的统计直方图,对可疑的目标像素进行预筛选,再用2个滑动窗口对像素进行判别。改进型的CFAR检测算法简化了原检测算法的结构,降低了检测结果的虚警率,提高了算法的计算效率,并在国际公开的雷达数据集上进行软件与DSP硬件的应用验证,测试表明该算法的有效性。     

空域CFAR处理方法综述

综述了空域恒虚警（Constanl False Alarm Rate,CFAR）处理研究的发展、现状和最新进展。首先,讨论了空域CFAR处理的概念及其在整个CFAR处理中所处的位置;然后,将空域CFAR处理算法分为ML类、OS类和自适应算法,介绍了每类CFAR算法的研究现状;最后,展望了空域CFAR处理算法的发展,指出...     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

非高斯杂波下自适应雷达目标检测新方法

在球不变随机向量(SIRV)非高斯杂波背景下,研究了多脉冲相参雷达目标的自适应检测问题。假设杂波具有相同的协方差矩阵结构和可能相关的纹理分量,提出了新的协方差矩阵估计器,并获得了相应的自适应归一化匹配滤波器(ANMF)。理论分析表明,在估计杂波分组大小与实际情况匹配时,所获得的ANMF对杂波功率水平和协方差矩阵结构均具有恒虚警率(CFAR)特性。仿真结果表明:当估计的杂波分组大小失配时,所获得的ANMF具有近似CFAR特性,并进一步分析了不同参数变化对所提检测器性能的影响。与已有的ANMF相比,所获得的ANMF具有更好的检测性能,且迭代次数更小,其相对于已知杂波协方差矩阵的最优归一化匹配滤波器(NMF)的检测损失也更小,具有很好的实际应用前景。     

一种城市背景下“低小慢”目标CFAR检测

线性调频连续波雷达应用于城市背景下"低小慢"目标有明显优势,但是传统的恒虚警检测在城市背景杂波中存在目标不易检测和时间消耗大的问题。针对城市背景杂波中"低小慢"目标的检测,提出了自适应调整参考窗大小的二维(2D)单元平均恒虚警(Cell Average Constant False-Alarm Rate,CA-CFAR)检测方法,该方法能实现有差别检测,因此显著减小时耗。在保持虚警概率恒定的情况下,通过判断杂波区域大小,自适应调整参考窗大小,得到更加合理的杂波估计,提升检测概率。研究结果表明,参考窗大小调整对检测起到明显作用,所用方法在杂波中能够更好地检测出目标。     

子空间干扰加高斯杂波背景下基于 GLRT的斜对称方向检测器设计

文章研究了背景为子空间干扰加高斯杂波的距离扩展目标方向检测问题。杂波是均值为零协方差矩阵未知但具有斜对称特性的高斯杂波,目标与干扰分别通过具备斜对称特性的目标子空间和干扰子空间描述。针对方向检测问题,利用上述斜对称性,根据广义似然比检验(Generalized Likeli-hood Ratio Test,GLRT)准则的一步与两步设计方法,设计了基于 GLRT的一步法与两步法的距离扩展目标方向检测器。通过理论推导证明了这 2种检测器相对于未知杂波协方差矩阵都具有恒虚警率。对比相同背景下已有检测器,特别是在辅助数据有限的场景下,文章提出的 2个检测器表现出了优越的检测性能。     

复合高斯杂波中距离扩展目标的迭代近似GLRT检测器

 研究了结构化的复合高斯杂波(CGC)背景中距离扩展目标自适应检测问题。针对异质杂波背景中的近似广义似然比检验(AGLRT-HTG)检测器应用于CGC背景中时存在一定的信杂比损失问题,结构化的复合高斯杂波采用自回归过程建模,结合近似广义似然比检验(AGLRT)方法和迭代估计思想,提出了CGC背景中距离扩展目标的迭代近似广义似然比检测器(RAGLRT-CGC)。从理论上分析了极限情况下RAGLRT-CGC虚警概率与检测门限关系的解析表达式。仿真结果表明,在CGC背景中,RAGLRT-CGC对不同多主散射点目标具有较好的鲁棒性,并且检测性能明显优于AGLRT-HTG。     

基于正交小波变换的目标检测方法

理论分析表明,独立高斯噪声经过正交小波变换后保持方差和独立性不变。基于Mallat的小波多分辨分析,通过对小波系数进行平方律处理,建立了基于正交小波变换的恒虚警率检测器模型,推导了相应的虚警和检测概率公式,分析了噪声未知情况下小波系数序列长度对检测性能的影响,并给出了合适的长度值。实验结果表明,所提出的检测器能满足不同虚警概率和杂波背景的要求,具有较好自适应性。     

基于导航雷达实测数据的CFAR检测算法分析

为提高导航雷达在复杂环境中的目标检测能力,研究了修正中值(MMD)检测器在导航雷达中的应用,并与经典非参量广义符号(GS)检测器和参量最小选择(SO)检测器的检测结果进行对比。仿真结果表明:GS检测器对海上单一目标有较好的检测性能,但是在多目标环境下的检测性能严重下降;SO检测器虽然对上述环境有较好的检测性能,但是由于杂波包络分布类型难以准确已知,杂波抑制能力较差;MMD检测器在多目标环境下有较好的检测性能和杂波抑制能力。     

基于FPGA的三种信号处理器的集成设计

现代高性能FPGA和DSP的不断出现,使得需要大数据量计算的雷达信号处理器向高度集成化和小型化方向发展成为可能,本文基于高性能FPGA(A ltera的Stratix II系列)详细介绍了一种数字波束形成器(DBF)、动目标检测器(MTD)和恒虚警检测器(CFAR)的单芯片集成设计方案,最后对其性能特性和改进方向做了初步的分析讨论,以满足更高性能要求时的设计实现。     

A new and robust CFAR detection algorithm

A constant false alarm rate (CFAR) detection method which is based on a combination of median and morphological filters (MEMO) is proposed. The MEMO algorithm has robust performance with small CFAR loss, very good behavior at clutter edges and high detection performance in the case of closely spaced narrowband signals (targets). The proposed MEMO method is favourably compared with cell averaging (CA) and ordered statistics (OS) CFAR detectors. The Monte Carlo method is employed to analyze the MEMO-CFAR detector     

False alarm analysis of the envelope detection GO-CFAR processor

The greatest of constant false alarm rate processor (GO CFAR) is a useful architecture for adaptively setting a radar detection threshold in the presence of clutter edges. The GO CFAR input is often the envelope detected in-phase (I) and quadrature (Q) channels of the baseband signal (x_e=√(I²+Q²)). This envelope detection can also be approximated using x=a max{|I|,|Q|}+b min{|I|,|Q|} which requires less complex hardware (a and b are simple multiplying coefficients). The envelope GO CFAR processor and several envelope approximation GO CFAR processors are compared in terms of the probability of false alarm (PFA) performance. Closed-form expressions which describe the PFA performance are given and their accuracy evaluated. It is shown that for all cases, the PFA is proportional to the number of reference cells n for small threshold multiplier T and inversely proportional to n for large T. A region of intersection occurs where the PFA is the same for two different values of n. For example, at T'=1.68 in the |I|+|Q| GO CFAR (a=1, b=1) the PFA for n=1 is equal to the optimal n=∞ fixed-threshold PFA (PFA=0.112)     

Distributed CFAR detection in homogeneous and nonhomogeneousbackgrounds

The performance of distributed constant false alarm rate (CFAR) detection with data fusion both in homogeneous and nonhomogeneous Gaussian backgrounds is analyzed. The ordered statistics (OS) CFAR detectors are employed as local detectors. With a Swerling type I target model, in the homogeneous background, the global probability of detection for a given fixed global probability of false alarm is maximized by optimizing both the threshold multipliers and the order numbers of the local OS-CFAR detectors. In the nonhomogeneous background with multiple targets or clutter edges, the performance of the detection system is analyzed and its performance is compared with the performance of the distributed cell-averaging (CA) CFAR detection system     

CFAR integration processors in randomly arriving impulseinterference

Time diversity transmission is often used to circumvent the high probability of a deep fade on a single transmission which may result in loss of the signal. One way to combat deep fades is to postdetection integrate the received observations from each range resolution cell. The false alarm rate of the postdetection integrator (PI) is extremely sensitive to randomly arriving impulse interference. Such interfering pulses may be unintentionally generated by nearby radars or intentionally generated by pulse jammers seeking to destroy the visibility of the radar. The binary integrator (PI) which uses an M-out-of-L decision rule is insensitive to at most M-1 interfering pulses. We consider the adaptive implementation of the PI and BI detectors for constant false alarm rate (CFAR) operation. We show that the CFAR BI detector when the “AND” (L-out-of-L) decision rule is used exhibits more robust false alarm control properties in the presence of impulse interference at the expense of severe detection loss when no interference is present. The CFAR adaptive PI (API) detector is proposed to alleviate this problem. The CFAR API detector implements an adaptive censoring algorithm which determines and censors with high probability the interference samples thereby achieving robust false alarm control in the presence of interference and optimum detection performance in the absence of interference     

The Detection Performance of the Siebert and Dicke-Fix CFAR Radar Detectors

The Siebert and the Dicke-fix CFAR radar detectors, used to maintain a constant false alarm rate (CFAR) in radar receivers under very similar circumstances, are considered. The Siebert detector represents the maximum-likelihood detection procedure for a signal in Gaussian noise of unknown power level, whereas the Dicke-fix makes use of a bandpass limiter to normalize the input and thus ensure a constant false alarm rate. The detection performance of the two detectors is determined and a comparison shows that over a wide range of parameters, the Dicke-fix introduces a loss which is approximately 1 B larger than for the Siebert detector.     

Detection of random signals via spectrum matching

Using a priori knowledge of the signal power spectral density (PSD), a spectrum matching approach which effectively utilizes the available signal spectral shape is developed for random signal detection. Two spectrum matching detector (SMD) structures, which are implemented by correlogram and periodogram, respectively, are examined. Theoretical calculation of their false alarm rates is derived and confirmed by simulations. It is also demonstrated that the proposed detectors outperform the standard periodogram, Bartlett method, and energy detector under constant false alarm rate (CFAR) condition for two different random signals.     

Data quantization effects in CFAR signal detection

In this paper, we investigate data quantization effects in constant false alarm rate (CFAR) signal detection. Exponential distribution for the input data and uniform quantization are assumed for the CFAR detector analysis. Such assumptions are valid in the case of radar for a Swerling I target in Gaussian clutter plus noise and a receiver with analog square-law detection followed by analog-to-digital (A/D) conversion. False alarm and detection probabilities of the cell averaging (CA) and order statistic (OS) CFAR detectors operating on quantized observations are analytically determined. In homogeneous backgrounds with 15 dB clutter power fluctuations, we show analytically that a 12-bit uniform quantizer is sufficient to achieve false alarm rate invariance. Detector performance characteristics in nonhomogeneous backgrounds, due to regions of clutter power transitions and multiple interfering targets, are also presented and detailed comparisons are given     

Radar detection and preclassification based on multiple hypothesis

This work presents a single-scan-processing approach to the problem of detecting and preclassifying a radar target that may belong to different target classes. The proposed method is based on a hybrid of the maximum a posteriori (MAP) and Neyman-Pearson (NP) criteria and guarantees the desired constant false alarm rate (CFAR) behavior. The targets are modeled as subspace random signals having zero mean and given covariance matrix. Different target classes are discriminated based on their different signal subspaces, which are specified by their corresponding projection matrices. Performance is investigated by means of numerical analysis and Monte Carlo simulation in terms of probability of false alarm, detection and classification; the extra signal-to-noise power ratio (SNR) necessary to classify once target detection has occurred is also derived.     

Importance sampling for characterizing STAP detectors

This paper describes the development of adaptive importance sampling (IS) techniques for estimating false alarm probabilities of detectors that use space-time adaptive processing (STAP) algorithms. Fast simulation using IS methods has been notably successful in the study of conventional constant false alarm rate (CFAR) radar detectors, and in several other applications. The principal objectives here are to examine the viability of using these methods for STAP detectors, develop them into powerful analysis and design algorithms and, in the long term, use them for synthesizing novel detection structures. The adaptive matched filter (AMF) detector has been analyzed successfully using fast simulation. Of two biasing methods considered, one is implemented and shown to yield good results. The important problem of detector threshold determination is also addressed, with matching outcome. As an illustration of the power of these methods, two variants of the square-law AMF detector that are thought to be robust under heterogeneous clutter conditions have also been successfully investigated. These are the envelope-law and geometric-mean STAP detectors. Their CFAR property is established and performance evaluated. It turns out the variants have detection performances better than those of the AMF detector for training data contaminated by interferers. In summary, the work reported here paves the way for development of advanced estimation techniques that can facilitate design of powerful and robust detection algorithms     

A Detection Algorithm for Optical Targets in Clutter

There is active interest in the development of algorithms for detecting weak stationary optical and IR targets in a heavy opticalclutter background. Often only poor detectability of low signal-to-noise ratio (SNR) targets is achieved when the direct correlation method is used. In many cases, this is partly obviated by using detection with correlated reference scenes [1, 2].This paper uses the experimentally justified assumption that most optical clutter can be modeled as a whitened Gaussian randomprocess with a rapidly space-varying mean and a more slowlyvarying covariance [2]. With this assumption, a new constant falsealarm rate (CFAR) detector is developed as an application of the classical generalized maximum likelihood ratio test of Neyman and Pearson. The final CFAR test is a dimensionless ratio. This test exhibits the desirable property that its probability of a false alarm(PFA) is independent of the covariance matrix of the actual noiseencountered. When the underlying noise processes are complex intime, similar considerations can yield a sidelobe canceler CFARdetection criterion for radar and communications. Performance analyses based on the probability of detection (PD)versus signal-to-noise ratio for several given fixed false alarm probabilities are presented. Finally these performance curves are validated by computer simulations of the detection process which use real image data with artificially implanted signals.