The Galaxy Cluster Mass Scale and Its Impact on Cosmological Constraints from the Cluster Population

Space Science Reviews - The QB50 mission is a satellite constellation designed to carry out measurements at between 200–380 km altitude in the ionosphere. The multi-needle Langmuir probe...     

Design,Development, Implementation,and On-orbit Performance of the Dynamic Ionosphere CubeSat Experiment Mission

Funded by the NSF CubeSat and NASA ELaNa programs, the Dynamic Ionosphere CubeSat Experiment (DICE) mission consists of two 1.5U CubeSats which were launched into an eccentric low Earth orbit on October 28, 2011. Each identical spacecraft carries two Langmuir probes to measure ionospheric in-situ plasma densities, electric field probes to measure in-situ DC and AC electric fields, and a science grade magnetometer to measure in-situ DC and AC magnetic fields. Given the tight integration of these multiple sensors with the CubeSat platforms, each of the DICE spacecraft is effectively a “sensor-sat” capable of comprehensive ionospheric diagnostics. The use of two identical sensor-sats at slightly different orbiting velocities in nearly identical orbits permits the de-convolution of spatial and temporal ambiguities in the observations of the ionosphere from a moving platform. In addition to demonstrating nanosat-based constellation science, the DICE mission is advancing a number of groundbreaking CubeSat technologies including miniaturized mechanisms and high-speed downlink communications.     

The GRASP telescope

The GRASP mission Gamma-Ray Astronomy with Spectroscopy and Positioning addresses the scientific goals of fine spectroscopy with imaging and accurate positioning of gamma-ray sources, an unexplored area within gamma-ray astronomy. The assessment of GRASP as a future space astronomy mission in the mid-1990s has led to the design of the instrument outlined in this article. Thus GRASP is a third generation gamma-ray telescope and is designed to operate as a high quality spectral imager in the mid-1990s, when, following the GRO, SIGMA, and GAMMA-1 missions, there will be requirement for a more sophisticated instrument to maintain the momentum of advance in gamma-ray astronomy. The telescope will be capable of locating point sources with a precision of typically 1 arc min, whilst making a fine spectral analysis (E/E 1000) of any gamma-ray line features. The high sensitivity of this instrument and the long (> 2 year) lifetime of the mission will enable a large number ( 1000) of astronomical objects to be studied. The GRASP mission has the potential to move gamma-ray astronomy from an era of basic exploration to one in which detailed and novel measurements can be used to gain a better understanding of many astrophysical problems.     

An Overview of the Fast Auroral SnapshoT (FAST) Satellite

The FAST satellite is a highly sophisticated scientific satellite designed to carry out in situ measurements of acceleration physics and related plasma processes associated with the Earth's aurora. Initiated and conceptualized by scientists at the University of California at Berkeley, this satellite is the second of NASA's Small Explorer Satellite program designed to carry out small, highly focused, scientific investigations. FAST was launched on August 21, 1996 into a high inclination (83°) elliptical orbit with apogee and perigee altitudes of 4175 km and 350 km, respectively. The spacecraft design was tailored to take high-resolution data samples (or `snapshots') only while it crosses the auroral zones, which are latitudinally narrow sectors that encircle the polar regions of the Earth. The scientific instruments include energetic electron and ion electrostatic analyzers, an energetic ion instrument that distinguishes ion mass, and vector DC and wave electric and magnetic field instruments. A state-of-the-art flight computer (or instrument data processing unit) includes programmable processors that trigger the burst data collection when interesting physical phenomena are encountered and stores these data in a 1 Gbit solid-state memory for telemetry to the Earth at later times. The spacecraft incorporates a light, efficient, and highly innovative design, which blends proven sub-system concepts with the overall scientific instrument and mission requirements. The result is a new breed of space physics mission that gathers unprecedented fields and particles observations that are continuous and uninterrupted by spin effects. In this and other ways, the FAST mission represents a dramatic advance over previous auroral satellites. This paper describes the overall FAST mission, including a discussion of the spacecraft design parameters and philosophy, the FAST orbit, instrument and data acquisition systems, and mission operations.     

Dynamic Modelling of the Hipparcos Attitude

We present a new method for a high-accuracy reconstruction of the attitude for a slowly spinning satellite. This method, referred to as the fully-dynamic approach, explores the possibility to describe the satellite's attitude as that of a rigid body subject to continuous external torques. The method is tried out on the Hipparcos data and is shown to reduce the noise for the along-scan attitude reconstruction for that mission by about a factor two to three. The dynamic modelling is expected to give a more accurate representation of the satellite's attitude than was obtained with a pure mathematical modelling. As such, it decreases the degrees of freedom in the a posteriori reconstruction. Some of the decrease is obtained through accumulating and subsequently implementing information on high frequency components in the solar radiation torques, which show to be systematic and predictable. This could be expected, as they are primarily linked to the external geometry and optical properties of the satellite. In the context of an astrometric mission, the methods presented here can only be applied as a final iteration step: the star positions that are used to reconstruct the attitude are also part of the scientific objectives of the mission. An estimate for the potential of a re-reduction of the Hipparcos data using the fully-dynamic model for the attitude reconstruction was obtained from test reductions of the first 24 months of mission data. Improvement of the accuracies of the astrometric parameters for all stars brighter than Hp=9.0 appears possible. The noise on the astrometric parameters for these stars was affected significantly by the along-scan attitude noise, which dominated for stars brighter than Hp=4.5. The possible improvement for stars brighter than about Hp=4.5 may, after iterations, be as much as a factor three. The reduced noise levels also allow a more accurate calibration and monitoring of instrument parameters, leading potentially to a better understanding of the instrument and the scientific data obtained with it. This revised version was published online in August 2006 with corrections to the Cover Date.     

TUBSAT-N,an ultra low cost global communication nanosatellite system

In the framework of the research project TUBSAT-N (Technical University of Berlin SATellite-Nano) it has been demonstrated that it is possible to achieve ultra low cost space access very quickly. TUBSAT-N and TUBSAT-N1 were launched as a satellite cluster in July 1998 with a convertible Russian military SS-23 SHTIL Rocket from a submarine. This project should prove that nanosatellite technology can be a good solution for a commercial ultra-low cost project.     

The Rosat mission

The primary scientific objective of the ROSAT mission is to perform the first all sky survey with an imaging X-ray telescope leading to an improvement in sensitivity by several orders of magnitude compared with previous surveys. Consequently a large number of new sources (> 10⁵) will be discovered and located with an accuracy of 1 arcmin. After completion of the survey which will take about half a year the instrument will be used for detailed observations of selected targets.The X-ray telescope consists of a fourfold nested Wolter type I mirror system with 80 cm aperture and 240 cm focal length, and three focal plane detectors. In the baseline version these will be imaging proportional counters (0.1 – 2 keV) providing a field of view of 2⁰ × 2⁰.     

The infrared space observatory

The Infrared Space Observatory (ISO), a programme of the European Space Agency, is an astronomical satellite operating at wavelength from 2.5 to 200 m. It will be launched in 1995.The ISO optical subsystem is a cryogenically cooled telescope with its baffling system (main baffle and sunshade). The telescope, a 60 cm Ritchey-Chrétien type, focuses the beam to the four scientific instruments located in its focal plane. The extremely low temperature, 1.8 K, is provided by the payload module (PLM) cryostat, filled with superfluid He.This paper presents the main choices done for the telescope design together with their rationale and the performances achieved on the flight model (FM) of the telescope. The FM telescope is presently installed inside the payload module, ready for the system final verifications.     

The Emergence of Life

The Rosetta observations have greatly advanced our knowledge of the cometary nucleus and its immediate environment. However, constraints on the mission (both planned and unplanned), the only partially successful Philae lander, and other instrumental issues have inevitably resulted in open questions. Surprising results from the many successful Rosetta observations have also opened new questions, unimagined when Rosetta was first planned. We discuss these and introduce several mission concepts that might address these issues. It is apparent that a sample return mission as originally conceived in the 1980s during the genesis of Rosetta would provide many answers but it is arguable whether it is technically feasible even with today’s technology and knowledge. Less ambitious mission concepts are described to address the suggested main outstanding scientific goals.

     

Infrared telescope in space: IRTS

The IRTS is a first Japanese infrared satellite mission which will be launched on February of 1995 by HII rocket. The IRTS is one of the mission experiments aboard the small space platform, SFU. The telescope aperture of the IRTS is 15cm, but is cooled by liquid Helium to realize very low background condition. Four instruments are installed on the focal plane which cover wide wavelengths from near infrared to submillimeter regions. The IRTS is optimized to observe the diffuse extended emission, and will survey about 10% of the sky in 20 days of mission life. The IRTS will provide significant information on cosmology, interstellar matter, late type stars, and interplanetary dust.     

An atmosphere-breathing propulsion system using inductively coupled plasma source

CubeSats have attracted more research interest recently due to their lower cost and shorter production time. A promising technology for CubeSat application is atmosphere-breathing electric propulsion, which can capture the atmospheric particles as propulsion propellant to maintain long-term mission at very low Earth orbit. This paper designs an atmosphere-breathing electric propulsion system for a 3 U CubeSat, which consists of an intake device and an electric thruster based on the inductively coupled plasma. The capture performance of intake device is optimized considering both particles capture efficiency and compression ratio. The plasma source is also analyzed by experiment and simulation. Then, the thrust performance is also estimated when taking into account the intake performance. The results show that it is feasible to use atmosphere-breathing electric propulsion technology for CubeSats to compensate for aerodynamic drag at lower Earth orbit.     

Long-Range Reconnaissance Imager on New Horizons

The LOng-Range Reconnaissance Imager (LORRI) is the high-resolution imaging instrument for the New Horizons mission to Pluto, its giant satellite Charon, its small moons Nix and Hydra, and the Kuiper Belt, which is the vast region of icy bodies extending roughly from Neptune’s orbit out to 50 astronomical units (AU). New Horizons launched on January 19, 2006, as the inaugural mission in NASA’s New Frontiers program. LORRI is a narrow-angle (field of view=0.29°), high-resolution (4.95 μrad pixels), Ritchey-Chrétien telescope with a 20.8-cm diameter primary mirror, a focal length of 263 cm, and a three-lens, field-flattening assembly. A 1,024×1,024 pixel (optically active region), thinned, backside-illuminated charge-coupled device (CCD) detector is used in the focal plane unit and is operated in frame-transfer mode. LORRI provides panchromatic imaging over a bandpass that extends approximately from 350 nm to 850 nm. LORRI operates in an extreme thermal environment, situated inside the warm spacecraft with a large, open aperture viewing cold space. LORRI has a silicon carbide optical system, designed to maintain focus over the operating temperature range without a focus adjustment mechanism. Moreover, the spacecraft is thruster-stabilized without reaction wheels, placing stringent limits on the available exposure time and the optical throughput needed to satisfy the measurement requirements.     

The New Horizons Pluto Kuiper Belt Mission: An Overview with Historical Context

NASA’s New Horizons (NH) Pluto–Kuiper Belt (PKB) mission was selected for development on 29 November 2001 following a competitive selection resulting from a NASA mission Announcement of Opportunity. New Horizons is the first mission to the Pluto system and the Kuiper belt, and will complete the reconnaissance of the classical planets. New Horizons was launched on 19 January 2006 on a Jupiter Gravity Assist (JGA) trajectory toward the Pluto system, for a 14 July 2015 closest approach to Pluto; Jupiter closest approach occurred on 28 February 2007. The ～400 kg spacecraft carries seven scientific instruments, including imagers, spectrometers, radio science, a plasma and particles suite, and a dust counter built by university students. NH will study the Pluto system over an 8-month period beginning in early 2015. Following its exploration of the Pluto system, NH will go on to reconnoiter one or two 30–50 kilometer diameter Kuiper Belt Objects (KBOs) if the spacecraft is in good health and NASA approves an extended mission. New Horizons has already demonstrated the ability of Principal Investigator (PI) led missions to use nuclear power sources and to be launched to the outer solar system. As well, the mission has demonstrated the ability of non-traditional entities, like the Johns Hopkins Applied Physics Laboratory (JHU/APL) and the Southwest Research Institute (SwRI) to explore the outer solar system, giving NASA new programmatic flexibility and enhancing the competitive options when selecting outer planet missions. If successful, NH will represent a watershed development in the scientific exploration of a new class of bodies in the solar system—dwarf planets, of worlds with exotic volatiles on their surfaces, of rapidly (possibly hydrodynamically) escaping atmospheres, and of giant impact derived satellite systems. It will also provide other valuable contributions to planetary science, including: the first dust density measurements beyond 18 AU, cratering records that shed light on both the ancient and present-day KBO impactor population down to tens of meters, and a key comparator to the puzzlingly active, former dwarf planet (now satellite of Neptune) called Triton which is in the same size class as the small planets Eris and Pluto.     

Infrared Imaging Surveyor: IRIS

Based on the experience of the IRTS, a new infrared satellite mission, Infrared Imaging Surveyor:IRIS is now being proposed to ISAS. The IRIS will be thrown into the sun synchronous orbit at 900km altitude by the MV rocket which is now under development in ISAS. With use of new cryogenic technologies, considerably light weight with large aperture telescope is designed. Owing to the large format states-of-art array detectors, the IRIS has an enormous capability for the survey observation, and will provide new discoveries on the formation and evolution of galaxies, brown dwarfs, protoplanetary disk, interstellar matter and so on.     

Comet nucleus sample return: Plans and capabilities

ROSETTA — the Comet Nucleus Sample Return mission — is one of the four Cornerstone missions to which ESA has committed itself in its approved Long-Term Programme Horizon 2000. The mission is currently being studied in collaboration with NASA. The comet-nucleus samples that ROSETTA is to provide will allow us to study some of the most primitive material in the solar system and the physical and chemical processes that marked the beginning of the system 4.6 billion years ago. For ESA, ROSETTA is a new type of mission: one which will return a sample at cryogenic temperature, and where as much effort has to be spent on preparing the laboratory analysis on-ground as has to be invested in preparing the space segment with the sample acquisition and in situ documentation. As part of the preparation for this mission, ESA is now starting to consider Planetary Protection issues.     

Data Processing at KAGUYA Operation and Analysis Center

The functions of KAGUYA(SELENE) Operation and Analysis Center (SOAC) are to operate three satellites: the main orbiter KAGUYA and two small satellites, Relay satellite OKINA and VRAD (VLBI (Very Long Baseline Interferometry) RADio source) satellite OUNA; and to process, archive and provide mission data. SOAC has two main functional areas, “Tracking and Control system” and “Mission Operation and Data Analysis system.” The former is for operational planning of bus and mission instruments including satellite navigation, and for the implementation of those plans and for the evaluation of satellite conditions. The latter is the system that processes, archives and provides mission data, and which principal investigators use to generate higher-level data products. Data up to the end of the operation in June 2009 have been processed and the total amount of Level-2 data products reaches about 50 TB. The data products have been released to the public since November 2009.     

Virtis: An Imaging Spectrometer for the Rosetta Mission

The VIRTIS (Visual IR Thermal Imaging Spectrometer) experiment has been one of the most successful experiments built in Europe for Planetary Exploration. VIRTIS, developed in cooperation among Italy, France and Germany, has been already selected as a key experiment for 3 planetary missions: the ESA-Rosetta and Venus Express and NASA-Dawn. VIRTIS on board Rosetta and Venus Express are already producing high quality data: as far as Rosetta is concerned, the Earth-Moon system has been successfully observed during the Earth Swing-By manouver (March 2005) and furthermore, VIRTIS will collect data when Rosetta flies by Mars in February 2007 at a distance of about 200 kilometres from the planet. Data from the Rosetta mission will result in a comparison – using the same combination of sophisticated experiments – of targets that are poorly differentiated and are representative of the composition of different environment of the primordial solar system. Comets and asteroids, in fact, are in close relationship with the planetesimals, which formed from the solar nebula 4.6 billion years ago. The Rosetta mission payload is designed to obtain this information combining in situ analysis of comet material, obtained by the small lander Philae, and by a long lasting and detailed remote sensing of the comet, obtained by instrument on board the orbiting Spacecraft. The combination of remote sensing and in situ measurements will increase the scientific return of the mission. In fact, the “in situ” measurements will provide “ground-truth” for the remote sensing information, and, in turn, the locally collected data will be interpreted in the appropriate context provided by the remote sensing investigation. VIRTIS is part of the scientific payload of the Rosetta Orbiter and will detect and characterise the evolution of specific signatures – such as the typical spectral bands of minerals and molecules – arising from surface components and from materials dispersed in the coma. The identification of spectral features is a primary goal of the Rosetta mission as it will allow identification of the nature of the main constituent of the comets. Moreover, the surface thermal evolution during comet approach to sun will be also studied.     

Alice: The rosetta Ultraviolet Imaging Spectrograph

We describe the design, performance and scientific objectives of the NASA-funded ALICE instrument aboard the ESA Rosetta asteroid flyby/comet rendezvous mission. ALICE is a lightweight, low-power, and low-cost imaging spectrograph optimized for cometary far-ultraviolet (FUV) spectroscopy. It will be the first UV spectrograph to study a comet at close range. It is designed to obtain spatially-resolved spectra of Rosetta mission targets in the 700–2050 Å spectral band with a spectral resolution between 8 Å and 12 Å for extended sources that fill its ～0.05^ × 6.0^ field-of-view. ALICE employs an off-axis telescope feeding a 0.15-m normal incidence Rowland circle spectrograph with a toroidal concave holographic reflection grating. The microchannel plate detector utilizes dual solar-blind opaque photocathodes (KBr and CsI) and employs a two-dimensional delay-line readout array. The instrument is controlled by an internal microprocessor. During the prime Rosetta mission, ALICE will characterize comet 67P/Churyumov-Gerasimenko's coma, its nucleus, and nucleus/coma coupling; during cruise to the comet, ALICE will make observations of the mission's two asteroid flyby targets and of Mars, its moons, and of Earth's moon. ALICE has already successfully completed the in-flight commissioning phase and is operating well in flight. It has been characterized in flight with stellar flux calibrations, observations of the Moon during the first Earth fly-by, and observations of comet C/2002 T7 (LINEAR) in 2004 and comet 9P/Tempel 1 during the 2005 Deep Impact comet-collision observing campaign.     

The Upgraded CARISMA Magnetometer Array in the THEMIS Era

This review describes the infrastructure and capabilities of the expanded and upgraded Canadian Array for Realtime InvestigationS of Magnetic Activity (CARISMA) magnetometer array in the era of the THEMIS mission. Formerly operated as the Canadian Auroral Network for the OPEN Program Unified Study (CANOPUS) magnetometer array until 2003, CARISMA capabilities have been extended with the deployment of additional fluxgate magnetometer stations (to a total of 28), the upgrading of the fluxgate magnetometer cadence to a standard data product of 1 sample/s (raw sampled 8 samples/s data stream available on request), and the deployment of a new network of 8 pairs of induction coils (100 samples per second). CARISMA data, GPS-timed and backed up at remote field stations, is collected using Very Small Aperture Terminal (VSAT) satellite internet in real-time providing a real-time monitor for magnetic activity on a continent-wide scale. Operating under the magnetic footprint of the THEMIS probes, data from 5 CARISMA stations at 29–30 samples/s also forms part of the formal THEMIS ground-based observatory (GBO) data-stream. In addition to technical details, in this review we also outline some of the scientific capabilities of the CARISMA array for addressing all three of the scientific objectives of the THEMIS mission, namely: 1. Onset and evolution of the macroscale substorm instability, 2. Production of storm-time MeV electrons, and 3. Control of the solar wind-magnetosphere coupling by the bow shock, magnetosheath, and magnetopause. We further discuss some of the compelling questions related to these three THEMIS mission science objectives which can be addressed with CARISMA.