Study on JAXA elements for international lunar vicinity mission

JAXA has commenced technical research for contributing as a part of international partnership for the space exploration in Lunar vicinity. One of the candidates is the cargo transport mission with the combination of Cryogenic Propulsion Stage(s) (CPS) and a transfer vehicle derived from Japanese un-manned vehicle used for ISS. The CPS needs advanced technologies to keep the propellant for long mission duration and they will be useful in further missions beyond moon. This paper reports the profile of the mission, vehicle configurations, and the transport capabilities.     

ATV交会飞行控制策略研究

"自动转移飞行器"(ATV)是欧洲航天局(ESA)服务"国际空间站"(ISS)的项目.ATV货运飞行器自动执行调相,交会与对接、分离、降轨,以及受控毁坏性再入.ATV对ISS的交会对接可脱离地面控制自主完成,ATV交会使命将朝向栽人航天飞行发展,高度自主性与严格安全性是ATV使命设计的主要特点.在自主交会飞行期间,飞行...     

The Mars Sample Return Project.

The Mars Sample Return (MSR) Project is underway. A 2003 mission to be launched on a Delta III Class vehicle and a 2005 mission launched on an Ariane 5 will culminate in carefully selected Mars samples arriving on Earth in 2008. NASA is the lead agency and will provide the Mars landed elements, namely, landers, rovers, and Mars ascent vehicles (MAVs). The French Space Agency CNES is the largest international partner and will provide for the joint NASA/CNES 2005 Mission the Ariane 5 launch and the Earth Return Mars Orbiter that will capture the sample canisters from the Mars parking orbits the MAVs place them in. The sample canisters will be returned to Earth aboard the CNES Orbiter in the Earth Entry Vehicles provided by NASA. Other national space agencies are also expected to participate in substantial roles. Italy is planning to provide a drill that will operate from the Landers to provide subsurface samples. Other experiments in addition to the MSR payload will also be carried on the Landers. This paper will present the current status of the design of the MSR missions and flight articles.     

International Space Station as a base camp for exploration beyond low Earth orbit

The idea for using the International Space Station (ISS) as a platform for exploration has matured in the past few years and the concept continues to gain momentum. ISS provides a robust infrastructure which can be used to test systems and capabilities needed for missions to the Moon, Mars, asteroids and other potential destinations. International cooperation is a critical enabler and ISS has already demonstrated successful management of a large multi-national technical endeavor. Systems and resources needed for expeditions can be aggregated and thoroughly tested at ISS before departure thus providing wide operational flexibility and the best assurance of mission success. A small part of ISS called an Exploration Platform (ISS-EP) can be placed in cislunar space providing immediate benefits and flexibility for future exploration missions.We will show how ISS and the ISS-EP can be used to reduce risk and improve the operational flexibility for missions beyond low Earth orbit. Life support systems and other technologies developed for ISS can be evolved and adapted to the ISS-EP and other exploration spacecrafts. New technology, such as electric propulsion and advanced life support systems can be tested and proven at ISS as part of an incremental development program. Commercial companies who are introducing transportation and other services will benefit with opportunities to contribute to the mission since ISS will serve as a focal point for the commercialization of low earth orbit services. Finally, we will show how the use of ISS provides immediate benefits to the scientific community because its capabilities are available today and certain critical aspects of exploration missions can be simulated.     

Short profile for the human spacecraft Soyuz-TMA rendezvous mission to the ISS

Reduction of flight duration after insertion till docking to the ISS is considered. In the beginning of the human flight era both the USSR and the USA used short mission profiles due to limited life support resources. A rendezvous during these missions was usually achieved in 1–5 revolutions. The short-term rendezvous were made possible by the coordinated launch profiles of both rendezvousing spacecraft, which provided specific relative position of the spacecraft or phase angle conditions. After the beginning of regular flights to the orbital stations these requirements became difficult to fulfill. That is why it was decided to transfer to 1- or 2-day rendezvous profile. The long stay of a crew in a limited habitation volume of the Soyuz-TMA spacecraft before docking to the ISS is one of the most strained parts of the flight and naturally cosmonauts wish to dock to the ISS as soon as possible. As a result of previous studies the short four-burn rendezvous mission profile with docking in a few orbits was developed. It is shown that the current capabilities of the Soyuz-FG launch vehicle and the Soyuz-TMA spacecraft are sufficient to provide for that. The first test of the short rendezvous mission during Progress cargo vehicle flight to the ISS is planned for 2012. Possible contingencies pertinent to this profile are described. In particular, in the majority of the emergency cases there is a possibility of an urgent transfer to the present 2-day rendezvous profile. Thus, the short mission will be very flexible and will not influence the ISS mission plan. Fuel consumption for the nominal and emergency cases is defined by statistical simulation of the rendezvous mission. The qualitative analysis of the short-term and current 2-day rendezvous missions is performed.     

Mission design and analysis of European astrophysics missions orbiting libration points

The main characteristics of the trajectory design of space observatory missions in the Earth–Sun libration point region is highlighted, based on experiences gained in work performed by the authors on ESA missions. Free transfers always lead to large-amplitude orbits around L₂, their properties (amplitudes, phases, non-linear behaviour) are related to the conditions at perigee. Launch scenarios with different degrees of freedom in the perigee geometry and different strategies of sharing the apogee raising between launcher and spacecraft propulsion for Soyuz (with circular parking orbit or direct injection) and Ariane 5 launches from French Guiana will be discussed. Besides the orbit selection and transfer analysis, an important aspect of libration missions is the maintenance of the operational orbit. For some missions it is required to maximise the time between maintenance manoeuvres, and for some the thrust authority is limited. In both cases the exponential nature of the state transition matrix has to be considered. If the equivalent velocity error in the unstable direction becomes too large, the orbit can become unrecoverable, leading to a departure from the environment of the Lagrange point within a few months.     

Astronaut training for the European ISS contributions Columbus module and ATV

An essential part of increment preparation for the ISS is the training of the flight crews. Each international partner is responsible for the basic training of its own astronauts, where a basic knowledge is taught on space science and engineering, ISS systems and operations and general astronaut skills like flying, diving, survival, language, etc. The main parts of the ISS crew training are the Advanced Training, e.g., generic ISS operations; nominal and malfunction systems operations and emergencies, and the Increment-Specific Training, i.e., operations and tasks specific to a particular increment. The Advanced and Increment-Specific Training is multilateral training, i.e., each partner is training all ISS astronauts on its contributions to the ISS program. Consequently, ESA is responsible for the Basic Training of its own astronauts and the Advanced and Increment-Specific Training of all ISS crews after Columbus activation on Columbus Systems Operations, Automated Transfer Vehicle (ATV), and ESA payloads.

This paper gives an overview of the ESA ISS Training Program for Columbus Systems Operations and ATV, for which EADS Space Transportation GmbH is the prime contractor. The key training tasks, the training flow and the training facilities are presented.     

欧洲再入大气层试验飞行器

欧洲再入大气层试验飞行器是简单的不载人座舱式飞行器。它将随“阿里安5”火箭的第二次鉴定飞行发射升空。这是欧洲载人航天计划中的重要一步,旨在试验航天器返回地面的全套回收技术、获取在再入大气层阶段的各种参数,为正式设计载人飞船提供依据。文中对这种试验飞行器的总体及试验测量技术作了简要介绍。     

发展X-37B空间飞机的背后动因分析

文章通过对X-37B飞行器的飞行试验任务分析,指出了X-37B飞行器不是空天飞机,也不是全球快速打击平台,而是一种低成本太空进入能力的飞行验证器,它的作用定位在空间而不是在空中。通过飞行试验和验证试验,旨在打造一个可重复使用的轨道转移运载器。将美国2010年航天战略的重大调整、国际空间站的运行延期和航天飞机退役等事件结合起来,对X-37B发展的背后动因进行分析,有助于了解美国航天发展的未来趋势。经过动因的详尽分析,指出要特别关注美国航天战略调整的两个重心转向,尤其是两个转向背后的动机。如何正确地认识国际空间站的作用定位,对于审视载人航天的未来发展有重要意义。美国航天战略的调整使载人航天的重心回到近地轨道上。基于中国目前的能力现实,建议中国的载人航天重心放在地球轨道上,做好各种能力的建设,并利用这些能力把地球轨道上的事做得更好。     

Hermes vehicle

The presence of Europe in the future developments of spatial programs, which are foreseen, for the 1990s and further, needs the availability of vehicles, modules and all related technologies adapted to operational use of low earth orbit station.The manned HERMES vehicle shall be part of the in-orbit infrastructure realized either in the European context or in cooperation between Europe and the United States.The main mission for this vehicle will be to run a shuttle with the station that means transport and change of the crews, its safe return in abort condition and cargo transport of consumable and experimental equipment.Secondary missions could be servicing on automatic platform, making autonomous scientific experiments. Lastly, the vehicle, by means of its on-board propulsion capability, could be used to accomplish in-orbit tow and assembly missions.Studies which are undertaken now about the vehicle are devoted to the aerodynamic shape (research of a compromise between aerothermic and overall fitting), the system (functional architecture, ground and flight configuration); further works dealing with technology are presently on hand in the field of thermal protection, aerodynamics, power generation with a high massic yield.     

From Earth's orbit to the outer planets and beyond: Psychological issues in space

Current planning for the first interplanetary expedition to Mars envisions a crew of 6 or 7 people and a mission duration of around 2.5 years. However, this time frame is much less than that expected on expeditions to the outer solar system, where total mission durations of 10 years or more are likely. Although future technological breakthroughs in propulsion systems and space vehicle construction may speed up transit times, for now we must realistically consider the psychological impact of missions lasting for one or more decades.Available information largely deals with on-orbit missions. In research that involved Mir and ISS missions lasting up to 7 months, our group and others have studied the effects of psychological and interpersonal issues on crewmembers and on the crew-ground relationship. We also studied the positive effects of being in space. However, human expeditions to the outer planets and beyond will introduce a number of new psychological and interpersonal stressors that have not been experienced before. There will be unprecedented levels of isolation and monotony, real-time communication with the Earth will not be possible, the crew will have to work autonomously, there will be great dependence on computers and other technical resources located on board, and the Earth will become an insignificant dot in space or will even disappear from view entirely.Strategies for dealing with psychological issues involving missions to the outer solar system and beyond will be considered and discussed, including those related to new technologies being considered for interstellar missions, such as traveling at a significant fraction of the speed of light, putting crewmembers in suspended animation, or creating giant self-contained generation ships of colonists who will not return to Earth.     

VEGA, a small launch vehicle

Several studies have been performed in Europe aiming to promote the full development of a small launch vehicle to put into orbit one ton class spacecrafts. But during the last ten years, the european workforce was mainly oriented towards the qualification of the heavy class ARIANE 5 launch vehicle.Then, due also to lack of visibility on this reduced segment of market, when comparing with the geosatcom market, no proposal was sufficiently attractive to get from the potentially interrested authorities a clear go-ahead, i.e. a financial committment.

The situation is now rapidly evolving. Several european states, among them ITALY and FRANCE, are now convinced of the necessity of the availability of such a transportation system, an important argument to promote small missions, using small satellites. Application market will be mainly scientific experiments and earth observation; some telecommunications applications may be also envisaged such as placement of little LEO constellation satellites, or replacement after failure of big LEO constellation satellites.

FIAT AVIO and AEROSPATIALE have proposed to their national agencies the development of such a small launch vehicle, named VEGA.

The paper presents the story of the industrial proposal, and the present status of the project: Mission spectrum, technical definition, launch service and performance, target development plan and target recurring costs, as well as the industrial organisation for development, procurement, marketing and operations.     

EXPERT: An atmospheric re-entry test-bed

In recognition of the importance of an independent European access to the International Space Station (ISS) and in preparation for the future needs of exploration missions, ESA is conducting parallel activities to generate flight data using atmospheric re-entry test-beds and to identify vehicle design solutions for human and cargo transportation vehicles serving the ISS and beyond. The EXPERT (European eXPErimental Re-entry Test-bed) vehicle represents the major on-going development in the first class of activities. Its results may also benefit in due time scientific missions to planets with an atmosphere and future reusable launcher programmes.

The objective of EXPERT is to provide a test-bed for the validation of aerothermodynamics models, codes and ground test facilities in a representative flight environment, to improve the understanding of issues related to analysis, testing and extrapolation to flight. The vehicle will be launched on a sub-orbital trajectory using a Volna missile. The EXPERT concept is based on a symmetrical re-entry capsule whose shape is composed of simple geometrical elements. The suborbital trajectory will reach 120 km altitude and a re-entry velocity of . The dimensions of the capsule are 1.6 m high and 1.3 m diameter; the overall mass is in the range of , depending upon the mission parameters and the payload/instrumentation complement. A consistent number of scientific experiments are foreseen on-board, from innovative air data system to shock wave/boundary layer interaction, from sharp hot structures characterisation to natural and induced regime transition.

Currently the project is approaching completion of the phase B, with Alenia Spazio leading the industrial team and CIRA coordinating the scientific payload development under ESA contract.     

The International Space Station human life sciences experiment implementation process.

The selection, definition, and development phases of a Life Sciences flight research experiment has been consistent throughout the past decade. The implementation process, however, has changed significantly within the past two years. This change is driven primarily by the shift from highly integrated, dedicated research missions on platforms with well defined processes to self contained experiments with stand alone operations on platforms which are being concurrently designed. For experiments manifested on the International Space Station (ISS) and/or on short duration missions, the more modular, streamlined, and independent the individual experiment is, the more likely it is to be successfully implemented before the ISS assembly is completed. During the assembly phase of the ISS, science operations are lower in priority than the construction of the station. After the station has been completed, it is expected that more resources will be available to perform research. The complexity of implementing investigations increases with the logistics needed to perform the experiment. Examples of logistics issues include- hardware unique to the experiment; large up and down mass and volume needs; access to crew and hardware during the ascent or descent phases; maintenance of hardware and supplies with a limited shelf life,- baseline data collection schedules with lengthy sessions or sessions close to the launch or landing; onboard stowage availability, particularly cold stowage; and extensive training where highly proficient skills must be maintained. As the ISS processes become better defined, experiment implementation will meet new challenges due to distributed management, on-orbit resource sharing, and adjustments to crew availability pre- and post-increment.     

Human and robotic repair of a solar array wing during ISS assembly mission 10A

With the installation of a new module and the relocation of three other modules, including multiple hand-offs from the station arm (SSRMS) to the shuttle arm (SRMS), International Space Station (ISS) assembly mission 10A/STS-120 was anticipated to be one of the most complicated ISS assembly missions ever attempted. The assembly operations became even more complex when a solar array wing (SAW) on the relocated Port-6 (P6) truss segment ripped while being extended. Repairing the torn SAW became the single most important objective for the remainder of STS-120, with future ISS assembly missions threatened by reduced power generation capacity if the SAW could not be repaired. Precise coordination between the space shuttle and ISS robotics teams led to an operational concept that combined the capabilities of the SRMS and SSRMS robotic systems in ways far beyond their original design capacities. Benefits of consistent standards for ISS robotic interfaces have been previously identified, but the advantages of having two such versatile and compatible robotic systems have never been quite so spectacular. This paper describes the role of robotics in the emergency SAW repair and highlights how versatility within space robotics systems can allow operations far beyond the intended design scenarios.     

Human and robotic repair of a solar array wing during ISS assembly mission 10A

With the installation of a new module and the relocation of three other modules, including multiple hand-offs from the station arm (SSRMS) to the shuttle arm (SRMS), International Space Station (ISS) assembly mission 10A/STS-120 was anticipated to be one of the most complicated ISS assembly missions ever attempted. The assembly operations became even more complex when a solar array wing (SAW) on the relocated Port-6 (P6) truss segment ripped while being extended. Repairing the torn SAW became the single most important objective for the remainder of STS-120, with future ISS assembly missions threatened by reduced power generation capacity if the SAW could not be repaired. Precise coordination between the space shuttle and ISS robotics teams led to an operational concept that combined the capabilities of the SRMS and SSRMS robotic systems in ways far beyond their original design capacities. Benefits of consistent standards for ISS robotic interfaces have been previously identified, but the advantages of having two such versatile and compatible robotic systems have never been quite so spectacular. This paper describes the role of robotics in the emergency SAW repair and highlights how versatility within space robotics systems can allow operations far beyond the intended design scenarios.     

Europe's major challenge for the 21st century: Access to space

Like the other great space powers of the 21st century, Europe has its own means of accessing space: Ariane, which has guaranteed its independence in the launching of civil and military satellites for almost 30 years and has won a significant part of the highly competitive commercial market. This market provides the Ariane system with the production volume indispensable for its reliability, which also benefits institutional launches. Europe's commercial market share will be even larger if the launch system is flexible and adaptable to the diversity of demand. Probable future technological changes make flexibility more necessary still. Two technical characteristics will be key: a large enough payload capacity and the injection of satellites into energetic orbits, including final geostationary orbit. But carrying out such missions will only be possible if a new generation upper stage is used. The November 2008 ESA ministerial meeting opted to wait until 2011 to decide whether this is necessary, making it doubtful whether Arianespace will be able to maintain leadership in the commercial market. The authors urge a rethink of this position.     

A low cost multimission bus for small satellites applications

This article presents the AEROSPATIALE ESPACE & DEFENSE industrial approach for the CNES PROTEUS platform. Three major targets were assigned to the PROTEUS platform. A very wide field of missions (orbits, attitude, instruments and launch vehicle compatibility) will be implemented on PROTEUS platform at a very attractive cost and within a 24 months delivery time. A cost driven system methodology has been established to produce a recurring platform at a very attractive cost. Cost reductions choices were analysed and selected on organisation, engineering, procurement, quality and industrialisation.     

The Russian experience in medical care and health maintenance of the International Space Station crews

The main purpose of the medical support system aboard International Space Station (ISS) is crew health maintenance and high level of work capability assurance prior to during and after in space flights. In the present communication the Russian point of view dealing with the problems and achievements in this branch is presented. An overview on medical operations during flight and after finalization of the space missions based on Russian data of crew health and environment state monitoring, as well as data on the inflight countermeasures (prophylaxis) jointly with data on operational problems that are specific to ISS is presented. The report summarizes results of the medical examination of Russian members of the ISS and taxi crews during and after visits to the ISS.     

Testing and evaluation of a method for locating potentially hazardous sites of eventual microdestruction and detecting marks of ISS RS hull leakage

In 2008, two experiments – BAR and EXPERT – were performed on the Russian segment (ISS RS) during ISS missions 16 and 17 using diagnostic equipment BAR. The experiments were aimed to enhance ISS safety by proposing means and methods of detecting leaks due to many factors including microdestruction of pressurized modules of the vehicle. The BAR experiment was designed to assess the ultraviolet background in 56 potentially dangerous locations identified by RS ISS designers and engineers. The method for locating sites carrying the risk of microdestruction of pressurized structure was verified. The study showed that the rate of microdestruction is highly affected by level of ultrasound vibrations caused by onboard equipment. The ultrasound measurements in 200 RS ISS sites were performed within the BAR experiment. The method consists of looking for surfaces with atmospheric condensate in the areas of increased levels of ultrasound vibrations. Twenty six sites were added to the nomenclature of potentially risky sites to be monitored on the regular basis. Some of these sites were contaminated by fungi and bacteria.