基于SMDO的滑模控制器设计及其在导弹上的应用

提出了一种基于滑模干扰观测器(SMDO)的滑模控制器(SMC)设计方法.针对一类级联多输入多输出(MI-MO)非线性系统,根据奇异摄动原理将其分为内、外回路分别进行控制器设计.以外回路为例,分析了传统基于饱和函数的滑模控制的鲁棒性,针对其在面I临干扰时鲁棒性较差的问题,在名义滑模控制律的基础上设计了基于超扭曲算法的SM...     

Fixed-time position coordinated tracking control for spacecraft formation flying with collision avoidance

In this paper, the fixed-time stability of spacecraft formation reconfiguration (position tracking) is studied. Firstly, a novel nonsingular terminal sliding mode surface is designed and based on which a fixed-time coordinated controller is designed to keep the closed-loop system states have a finite settling time bounded by some predefined constants. Secondly, another nonsingular terminal sliding mode surface is designed by combining the artificial potential function and the aforementioned sliding surface, which meets the mutual distance constraint during transition process among spacecraft when it is bounded. Then another coordinated controller with fixed-time observer considering mutual distance constraint is presented, which guarantees the closed-loop system states stable also in bounded settling time. Finally, simulation results are shown to validate the correctness of the proposed theorems. It is worth mentioning that the control schemes also work even though there is a properly limit on the control input.     

Fixed-time adaptive model reference sliding mode control for an air-to-ground missile

This paper addresses the fixed-time adaptive model reference sliding mode control for an air-to-ground missile associated with large speed ranges, mismatched disturbances and un-modeled dynamics. Firstly, a sliding mode surface is developed by the tracking error of the state equation and the model reference state equation with respect to the air-to-ground missile. More specifically,a novel fixed-time adaptive reaching law is presented. Subsequently, the mismatched disturbances and the un-modeled dynamics are treated as the model errors of the state equation. These model errors are estimated by means of a fixed-time disturbance observer, and they are also utilized to compensate the proposed controller. Therefore, the fixed-time controller is obtained by an adaptive reaching law and a fixed-time disturbance observer. Closed-loop stability of the proposed controller is established. Finally, simulation results including Monte Carlo simulations, nonlinear six-DegreeOf-Freedom(6-DOF) simulations and different ranges are presented to demonstrate the efficacy of the proposed control scheme.     

基于多入多出平衡流形展开模型的涡扇发动机反馈线性化滑模控制

针对涡扇发动机内部状态大范围变化条件下,单点线性控制器控制效果不佳而线性变参数控制器求解困难的问题,提出了一种基于多入多出平衡流形展开模型的涡扇发动机反馈线性化滑模变结构控制。首先,采用多入多出平衡流形展开模型辨识技术,获得仿射型的涡扇发动机数学模型。随后,利用反馈线性化将平衡流形展开模型解耦,经过坐标变换获得可用于控制系统设计的线性结果,考虑了具有误差项和饱和函数的指数趋近滑模控制律来提高控制系统的鲁棒性,完成了基于平衡流形展开模型的多变量涡扇发动机反馈线性化滑模控制器设计。最后,在非线性部件级模型上开展了控制器验证。在平衡流形展开模型设计工况,增益控制和滑模控制的控制效果表明,基于平衡流形展开模型的反馈线性化方法能够获得涡扇发动机良好的控制效果。同时,在平衡流形展开模型稳定但精度无法保证的非设计飞行工况,反馈线性化滑模控制器能够进一步抑制不确定性的影响,保证转子转速和发动机压比的跟踪控制效果。     

基于神经网络的MIMO非线性最小相位系统鲁棒自适应控制

 针对一类模型未知的具有不确定性和外部干扰的多输入多输出（MIMO）非线性最小相位系统提出了鲁棒自适应输出反馈跟踪控制方案。用高斯径向基函数（RBF）神经网络逼近对象未知非线性,用高增益观测器估计系统不可测量状态。所设计的鲁棒自适应控制器不仅能使闭环系统稳定,所有状态有界,而且跟踪误差一致最终有界,并保证最终边界足够小。仿真结果表明了所提出方法的有效性。     

机械手的神经网络自适应滑动模控制器设计

 针对多关节机械手的鲁棒跟随控制器设计问题，提出了一种新的机械手神经网络自适应滑动模控制器设计方法，机械手的动力学非线性假设是完全未知的。在提出的控制结构中，高斯径向基函数神经网络用于在线补偿机械手的动力学非线性，参数学习律由稳定性理论得到。给出了系统稳定性和参数收敛性的证明。最后提出方法的可行性通过仿真得到验证。     

十字梁实验系统的Terminal滑模控制

在介绍 Terminal 滑模控制器的设计思想的基础上,设计了十字梁实验系统的 Terminal滑模控制器。微喷十字梁实验系统是一个高阶非线性系统,也是一个典型的多输人多输出系统。Terminal 滑模控制保证了输出跟踪误差在有限时间内收敛到零,使系统的动态性能优于普通滑模中的性能。仿真结果表明,使用 Terminal 滑模控制器控制十字梁实验系统是可行的。     

吸气式高超声速飞行器鲁棒非奇异Terminal滑模反步控制

针对含有参数摄动、外界干扰的吸气式高超声速飞行器弹性模型,设计了一种基于新型非线性干扰观测器的Terminal滑模反步控制器。将考虑弹性模态的飞行器纵向模型表示为严格反馈形式,在传统反步法的基础上采用非奇异快速Terminal滑模控制俯仰角与俯仰角速率,优化了反步法的控制结构,并实现了系统的有限时间收敛。基于跟踪微分器设计了一种新型非线性干扰观测器,并与本文所提滑模反步方法相结合,通过对包括虚拟控制量微分信号在内的不确定性进行估计与补偿,进一步提高了控制器的鲁棒性,同时解决了"微分膨胀"问题。基于Lyapunov稳定性理论证明了系统的跟踪误差于有限时间收敛至零。仿真结果表明,该控制器在存在不确定性的情况下,可以实现对参考输入的稳定跟踪。     

PREDICTIVE VARIABLE STRUCTURE CONTROL FOR A CLASS OF NONLINEAR SYSTEM

Nonlinear sliding mode predictive controller is designed for a class of nonlinear system with unmodeled dynamic characteristics and nonlinear term. The method is based on nonlinear optimal predictive control. The variable structure control law minimizes the quadratic index of a predictive sliding mode, which contains the cost function of control preventing the control effect from saturation for in most practical implementation the control inputs are bounded by physical constraints and energy constraints. According to the immeasurable states, the variable structure observer for nonlinear systems is adapted. The variable structure system method is apt to the realization of observer with variable parameters and uncertainty. The proof shows that the states of the observer asymptotically convergence to the real states of the system although it is of uncertainty and nonlinear terms. Finally, the digital simulation results prove the effectiveness of the proposed method.     

自适应滑模容错跟踪飞行控制律的设计

当飞行控制系统操纵面发生卡死或控制效率损伤故障时,采用自适应滑模控制方法进行容错跟踪飞行控制律的设计。采用单位向量法进行滑模控制器的设计,利用李雅普诺夫理论和Barbalat引理设计自适应滑模调节规律,同时能够保证闭环系统的渐近稳定性。利用某型飞机线性化模型进行仿真,结果表明,带有自适应调节规律的滑模控制方法不仅适合于正常情况下飞行控制律的设计,而且对操纵面损伤和卡死故障情况具有较强的适应能力,具有很好的跟踪控制效果和强鲁棒性。     

新型自适应Terminal滑模控制及其应用

针对一类高阶MIMO非线性系统设计了基于快速模糊干扰观测器的自适应Terminal滑模控制方案.通过设计快速模糊干扰观测器,克服了传统模糊干扰观测器在误差较小时收敛速度慢的缺点.严格证明了跟踪误差及观测误差均在有限时间内收敛到零的小区域.最后在高超声速条件下,对空天飞行器再入过程的姿态控制进行仿真,结果表明了所设计干扰观测器的优越性和闭环控制方案的有效性.      

自适应二阶动态terminal滑模在近空间飞行器控制中的应用

为克服滑模抖振,设计了二阶动态terminal滑模,得到在时间本质上连续的控制器,并使滑模面在有限时间内收敛.然后采用非线性干扰观测器逼近复合干扰,通过在控制器中设置自适应补偿项,放宽了非线性干扰观测器的假设条件,不再要求复合干扰变化率为零.基于李雅普诺夫理论,严格证明了系统稳定性.最后将提出的控制方案应用于近空间飞行器姿态角跟踪仿真实验,仿真结果表明了该控制方案的有效性及优越性.      

Attitude tracking control for variable structure near space vehicles based on switched nonlinear systems

An adaptive robust attitude tracking control law based on switched nonlinear systems is presented for a variable structure near space vehicle (VSNSV) in the presence of uncertainties and disturbances. The adaptive fuzzy systems are employed for approximating unknown functions in the flight dynamic model and their parameters are updated online. To improve the flight robust performance, robust controllers with adaptive gains are designed to compensate for the approximation errors and thus they have less design conservation. Moreover, a systematic procedure is developed for the synthesis of adaptive fuzzy dynamic surface control (DSC) approach. According to the common Lyapunov function theory, it is proved that all signals of the closed-loop system are uniformly ultimately bounded by the continuous controller. The simulation results demonstrate the effectiveness and robustness of the proposed control scheme.     

Observer-based control for the platform of a tethered space robot

This paper addresses the attitude control problem of a space tethered robot platform in the presence of unknown external disturbance caused by a connecting elastic tether. The tether-generated unknown disturbance leads to tremendous challenges for attitude control of the platform. In this work, the perturbed attitude dynamics of the platform are derived with a consideration of the libration of the elastic tether, and then with the purpose of compensating the unknown disturbance, major attention is dedicated to develop a nonlinear disturbance observer based on gyros measurements, after which, an adaptive attitude scheme is proposed by combining the disturbance observer with a sliding mode controller. Finally, benefits from the observer based on an adaptive controller are validated by series of numerical simulations.     

基于故障观测器的无人机直接自修复控制

提出一种基于故障观测器的无人机直接自修复控制。首先,根据系统本身存在的故障,设计了一个非线性故障观测器对其进行观测。其次,设计了一个快速终端滑模面和直接自修复控制器,将指数函数和符号函数引入到新型滑模面里。同时引入了自适应技术,对不确定的故障估计其上界。最后,通过对无人机进行了相应的仿真数值验证得出所提方法的有效性。     

基于自适应模糊系统的空天飞行器非线性预测控制

 针对一类多输入多输出非线性不确定系统,提出了基于自适应模糊系统的非线性预测控制方法。控制器由基于模糊系统的非线性预测控制器和鲁棒自适应控制器两个部分组成。根据系统的跟踪误差在线调整模糊系统的权值,使得模糊系统一致逼近被控对象中的非线性函数,通过泰勒展开设计出基于模糊系统的非线性预测控制律,避免了预测控制在线优化带来的繁重的计算负担。鲁棒自适应控制器则用于减少不确定和模糊逼近误差对系统的影响。所设计的控制器保证了闭环系统的最终一致有界稳定。基于Lyapunov稳定原理,给出了理论证明和分析。最后利用提出的控制方案设计了空天飞行器高超声速飞行姿态的控制系统,仿真结果表明了控制方案的有效性。     

考虑输入饱和的固定翼无人机自适应增益滑模控制

针对复杂环境下的固定翼无人机飞行控制问题，考虑输入饱和以及复杂外界干扰的影响，提出一种基于自适应滑模控制方法的固定翼无人机飞行控制策略。首先，对固定翼无人机模型进行介绍，将模型分为姿态子系统和速度子系统；其次，针对姿态子系统和速度子系统的特点以及控制需求，分别采用自适应多变量螺旋滑模和自适应快速超螺旋滑模设计姿态控制器和速度控制器，该策略无需设计干扰观测器对外界干扰进行估计，仍然可以实现固定翼无人机对姿态参考指令和速度参考指令的有限时间精确跟踪，并基于Lyapunov的稳定性分析方法证明了闭环系统的稳定性。最后，对本文所提出的控制策略进行了仿真验证，结果表明该控制策略具有良好的控制性能。     

对失控航天器在轨服务的自适应滑模控制器设计

为实现对自由翻滚的失控目标航天器进行在轨服务,基于二阶滑模控制算法设计了相对位置与姿态耦合的自适应控制器。考虑相对转动对相对平动的耦合作用,建立了两航天器对接端口间相对位置与姿态耦合的动力学模型,并在此基础上设计了自适应Super twisting控制器,以减弱已知界限的有界干扰所产生的震颤效应,使闭环系统在有限时间内收敛到平衡点。利用李雅普诺夫方法证明了有界干扰下的闭环系统稳定性,并对收敛时间的上界进行了估计。仿真结果表明,与Super twisting算法相比,所设计的自适应二阶滑模控制器对参数不确定性及线性增长有界干扰具有较强的鲁棒性,且控制精度满足在轨服务的任务需求。     

基于自适应滑模观测器的航空发动机故障诊断

为解决现有航空发动机基于模型的在线故障诊断方法存在对模型精度要求高等的问题,利用滑模方法设计一种自适应滑模观测器对航空发动机进行在线故障重构、诊断与隔离。对传感器故障和执行机构故障分别设计了重构算法,针对两者重构故障的特点提出了判断逻辑,讨论了设计参数对于观测效果与抖振的影响。 Matlab/Simulink仿真结果显示,重构的故障与实际故障基本吻合,对故障的诊断、隔离、定位具有良好效果,并对环境不确定性具有优良的鲁棒性。     

基于名义模型的飞行模拟转台反演滑模控制

针对飞行模拟转台这一实际的不确定伺服系统,提出一种新型控制策略,该控制策略是建立在名义模型基础上的一种新型全鲁棒滑模控制器.控制系统由两种控制器构成,一种是针对实际对象的全鲁棒滑模控制器,另一种是针对名义模型的积分反演滑模控制器.采用名义模型与实际对象之间的建模误差设计全鲁棒滑模控制器,采用积分反演滑模控制器来保证控制精度,全鲁棒性能由全局滑模控制器来保证.采用Lyapunov方法实现了两种控制器的稳定性分析.以飞行模拟转台伺服系统为被控对象,针对正弦和阶跃响应的仿真结果表明,采用所提出的控制方法,可实现全局鲁棒性并保证较高的位置跟踪精度.