| 轴流压气机引气后流场的数值模拟 |
| |
| 引用本文： | 梁东,弓志强,陈灿平,高山.轴流压气机引气后流场的数值模拟[J].航空动力学报,2017,32(2):446-454. |
| |
| 作者姓名： | 梁东 弓志强 陈灿平 高山 |
| |
| 作者单位： | 1.中国航空发动机集团有限公司 中国航空发动机研究院,北京 101304 |
| |
| 摘 要： | 选取了NASA Stage 35作为算例进行压气机引气数值模拟研究.通过对比验证了网格无关性和计算的准确性,应用两种数值实现方法分别进行圆孔和槽引气计算,两种数值方法的结果基本吻合.进行了两种引气方式（即圆孔和槽）的对比.结果表明:槽引气转子出口总压损失小,效果好于圆孔引气.应用NUMECA软件自带引气模块操作简单,容易实现.绘制引气管路网格增加了流道网格绘制的难度和计算边界条件设置的复杂度,但更加符合压气机实际的引气情况.引气后压气机效率 流量曲线整体上移,总压比 流量曲线下降,失速裕度有较大提升.
|
| 关 键 词： | 轴流压气机 引气 网格无关性 总压损失 稳定裕度 |
| 收稿时间： | 2015/5/27 0:00:00 |
Numerical simulation on flow field of axial compressor after bleeding |
| |
| LIANG Dong,GONG Zhi-qiang,CHEN Can-ping,GAO Shan.Numerical simulation on flow field of axial compressor after bleeding[J].Journal of Aerospace Power,2017,32(2):446-454. |
| |
| Authors: | LIANG Dong GONG Zhi-qiang CHEN Can-ping GAO Shan |
| |
| Abstract: | By analyzing the transonic single stage compressors NASA Stage 35, the results of numerical simulation and the experimental results were combined, proving the veracity of numerical simulation. The hole and slot bleeding were calculated by two ways, and the same results were got. At last, the results of hole bleeding and the slot were compared. Result showed that, the slot bleeding was better. The bleeding/cooling block of NUMECA software was easy to realize the bleeding, another way increased the difficulty and complexity of numerical simulation, but it agreed with the fact of bleeding on compressor. Before the bleeding, the efficiency improved, and the total pressure ratio declined little. At same time, stall margin was enhanced. |
| |
| Keywords: | axial compressor bleeding grid independent total pressure loss stall margin |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |
|
