| 涡轮盘关键部位多圆弧设计及多变量优化 |
| |
| 引用本文： | 于洪飞,赵巍,付强,王佰智.涡轮盘关键部位多圆弧设计及多变量优化[J].航空动力学报,2017,32(12):2848-2854. |
| |
| 作者姓名： | 于洪飞 赵巍 付强 王佰智 |
| |
| 作者单位： | 1.中国航空发动机集团有限公司 中国航空发动机研究院，北京 101304 |
| |
| 摘 要： | 为得到质量最低且满足设计准则要求的涡轮盘结构形式，研究了多圆弧过渡对涡轮盘关键部位应力的影响。提出了双圆弧和三圆弧结构设计方案并推导了几何关系，为过渡圆弧的改进与优化提供了理论上的支持。通过有限元计算，获得了多圆弧结构参数对涡轮盘应力的影响规律。基于ANSYS Workbench优化平台及参数化建模技术，筛选了优化设计变量，以涡轮盘总质量最小为优化目标，以等效应力为约束对涡轮盘关键部位进行了多变量优化。结果表明:经过优化设计，两个关键部位的最大应力分别降低662%和11.40%，涡轮盘的质量减小0.16%。本文的研究结果为涡轮盘的多圆弧设计和工程应用提供了有益参考。
|
| 关 键 词： | 涡轮盘 结构设计 多圆弧 影响规律 多变量优化 |
| 收稿时间： | 2016/5/12 0:00:00 |
Design of key part on turbine disk using multi arcs method and multivariable optimization |
| |
| Abstract: | In order to obtain the structure type of turbine disk satisfying minimum masses and stress standards, the influence of multi arcs transition on stress distribution at key parts was studied. Double arcs and three arcs structure design schemes were proposed, and geometric theory on arcs transition was derived to support the design modifications and optimization. Based on finite element calculation, the stress varying with structure parameters was obtained. Based on ANSYS Workbench platform and parametric modeling technique, optimization design variables were chosen to get minimum masses with constrained equivalent stress. Result showed that, the maximum equivalent stress on two parts decreased by 662% and 1140%, the mass of turbine disk decreased by 016%. The results provide useful references for multi arcs design and engineering applications of the gas turbine disk. |
| |
| Keywords: | turbine disk structure design multi arcs change law multivariable optimization |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |
|
