| 畸变进气下压气机三维黏性数值计算模型 |
| |
| 引用本文： | 时培杰,乔渭阳,魏佐君,陈萍萍.畸变进气下压气机三维黏性数值计算模型[J].航空动力学报,2012,27(7):1472-1478. |
| |
| 作者姓名： | 时培杰 乔渭阳 魏佐君 陈萍萍 |
| |
| 作者单位： | 西北工业大学动力与能源学院,西安,710072 |
| |
| 摘 要： | 通过对压气机环形无叶片通道求解带源项的N-S(Navier-Stokes)方程,实现对压气机全通道流场的计算,建立了压气机三维黏性非定常数值计算模型.源项是由三维计算流体动力学(CFD)求解器定常计算的气流参数计算得到,求得不同工作点源项大小,然后根据进口参数对源项插值得到当前计算点源项.采用该模型对某跨声速单级压气机在均匀进气下性能和流场的计算结果与实验结果进行了对比,两者能够较好的一致,验证了模型的可靠性;之后应用该模型对周向总压畸变进气下的流场和性能进行了计算,分析了畸变进气对压气机三维流场和性能的影响,并引入压气机失稳判据分析畸变对压气机稳定性的影响.
|
| 关 键 词： | 计算模型 黏性 求解器 源项 畸变进气 性能 稳定性 |
| 收稿时间： | 2011/8/30 0:00:00 |
Investigation of three-dimensional viscous model for compressor with distortion inlet |
| |
| SHI Pei-jie,QIAO Wei-yang,WEI Zuo-jun and CHEN Ping-ping.Investigation of three-dimensional viscous model for compressor with distortion inlet[J].Journal of Aerospace Power,2012,27(7):1472-1478. |
| |
| Authors: | SHI Pei-jie QIAO Wei-yang WEI Zuo-jun and CHEN Ping-ping |
| |
| Affiliation: | School of Power and Energy, Northwestern Polytechnical University,Xi'an 710072,China;School of Power and Energy, Northwestern Polytechnical University,Xi'an 710072,China;School of Power and Energy, Northwestern Polytechnical University,Xi'an 710072,China;School of Power and Energy, Northwestern Polytechnical University,Xi'an 710072,China |
| |
| Abstract: | A three-dimensional model for predicting compressor performance and stability was developed by solving N-S(Navier-Stokes) equation with source terms to annulus duct without blades.The source terms were calculated by flow field parameters which were generated by conventional three-dimensional computational fluid dynamics(CFD) solver at different operation conditions.A transionic single-stage compressor was investigated by the model with clean inlet.The three-dimensional flow field and performance of CFD results agreed well with those of the experiment,which indicat that the model is reliable and correct.Finally,the effect of circumferential total-pressure distortion on the compresser flow and performance was studied with the model.The compressor stability was further analyzed by introducing the stall criterion. |
| |
| Keywords: | calculation model viscous solver source term distortion inlet performance stability |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |
|
