首页 | 官方网站   微博 | 高级检索  
     

[001]取向DD6单晶合金的薄壁试样持久性能与断裂行为
引用本文:张丽,于慧臣,郭广平,赵杰,赵澎涛.[001]取向DD6单晶合金的薄壁试样持久性能与断裂行为[J].航空动力学报,2019,34(3):627-634.
作者姓名:张丽  于慧臣  郭广平  赵杰  赵澎涛
作者单位:中国航空发动机集团有限公司北京航空材料研究院,北京100095;中国航空发动机集团有限公司北京航空材料研究院航空材料检测与评价北京市重点实验室,北京100095;中国航空发动机集团有限公司北京航空材料研究院材料检测与评价航空科技重点实验室,北京100095;中国航空发动机集团有限公司北京航空材料研究院材料检测与评价重点实验室,北京100095;大连理工大学材料科学与工程学院,辽宁大连,116085
摘    要:采用薄壁试样研究了温度为980℃、应力为250MPa条件下[001]取向DD6单晶合金的薄壁持久失效行为,结果表明:薄壁试样的持久寿命低于标准圆棒试样,表现出显著的薄壁效应。薄壁试样的厚度和持久寿命之间存在函数关系。薄壁试样持久断口边缘区域氧化严重,内部区域为微孔聚集型断裂,持久断裂模式为“表面氧化-裂纹萌生-扩展”和“内部蠕变损伤”共同作用,且试样越薄,表面氧化程度越大,持久寿命越短。 

关 键 词:单晶合金  薄壁效应  持久性能  断裂机制  微孔聚集型
收稿时间:2018/8/21 0:00:00

Stress rupture properties and fracture behavior of thin wall specimens of DD6 single crystal superalloy with [001] direction
Abstract:The stress rupture properties and the fracture character of thin wall specimens of DD6 single crystal superalloy with [001] direction were investigated at 980℃ and 250MPa. Result showed that stress rupture life of the thin wall specimens was less than that of the standard sample, which exhibited thin wall effect obviously. There was a function relationship between thickness and stress rupture life. The edge zone of the fracture surface of thin wall specimens was oxidized seriously, while the inside zone was affected by microvoid coalescence fracture. The fracture of thin wall specimen was indicated by coalescence of the “surface oxidation-crack initiating-crack growth” and “inside creep damage”. The extent of surface oxidation was more serious, while the stress rupture life was shorter. 
Keywords:single crystal superalloy  thin wall effect  stress rupture property  fracture mechanism  microvoid coalescence fracture
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号