| 气动除冰飞机结冰风洞试验技术 |
| |
| 引用本文： | 高郭池,李保良,丁丽,王梓旭,倪章松.气动除冰飞机结冰风洞试验技术[J].实验流体力学,2019,33(2):95-101. |
| |
| 作者姓名： | 高郭池 李保良 丁丽 王梓旭 倪章松 |
| |
| 作者单位： | 中国民用航空沈阳航空器适航审定中心,沈阳,110043;中国空气动力研究与发展中心,四川绵阳,621000 |
| |
| 摘 要： | 民用飞机为获得型号合格证，应按照有关结冰适航规章条款进行结冰适航验证，结冰风洞试验是获取临界冰形的有效途径。本文以Y12F飞机结冰风洞试验实际工程过程为例，总结与分析了气动除冰飞机结冰风洞试验的模型设计、气动除冰套模拟、试验状态转换、试验流程、冰形测量等关键技术，并给出代表性试验结果。试验结果表明:在典型最大结冰条件下，除冰套工作正常，除冰套循环工作期间正常除冰；除冰套工作间歇，机翼前缘结冰表现为前缘形成较为光滑、厚度约为5~6mm的冰帽，上翼面产生1道高度为3~4mm的冰脊，下翼面形成3道2~4mm的冰脊。
|
| 关 键 词： | 气动除冰 结冰风洞试验 除冰系统 冰形测量 冰脊 |
| 收稿时间： | 2018-06-27 |
Icing wind tunnel test technology for pneumatic de-icing aircraft |
| |
| Affiliation: | 1.Shenyang Aircraft Airworthiness Certification Center of Civil Aviation Administration of China, Shenyang 110043, China2.China Aerodynamics Research and Development Center, Mianyang Sichuan 621000, China |
| |
| Abstract: | Civil aircraft should conduct icing airworthiness certification according to relevant icing airworthiness regulation requirements in order to obtain the type certificate, and icing wind tunnel test is the effective way to get the critical ice shape. Based on an engineering application of icing wind tunnel test for the Y12F aircraft, test techniques are summarized and analyzed, such as the test model design, simulation of the pneumatic de-icing system, test status transformation, test process, ice shape measurement and so on. A typical test result is represented in the end, which indicates that the pneumatic de-icing system could run effectively under the typical maximum icing condition, and ice could be removed during the work cycle of the system. There would be ice accretion during the interval of system running. Ice formed at the leading edge is always smooth, and the thickness of the ice is from 5 to 6mm. There is an obvious ice ridge about 3 to 4mm thick on the upper surface, and three ice ridges about 2 to 4mm thick accrete on the lower surface. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《实验流体力学》浏览原始摘要信息 |
|
点击此处可从《实验流体力学》下载全文 |
|
