| 基于螺旋理论的环形桁架式可展天线构型综合 |
| |
| 引用本文： | 韩博,许允斗,韩媛媛,姚建涛,赵永生.基于螺旋理论的环形桁架式可展天线构型综合[J].宇航学报,2019,40(7):831-841. |
| |
| 作者姓名： | 韩博 许允斗 韩媛媛 姚建涛 赵永生 |
| |
| 作者单位： | 1. 燕山大学河北省并联机器人与机电系统实验室，秦皇岛 066004；2. 燕山大学先进锻压成形技术与 科学教育部重点实验室，秦皇岛 066004；3.衡水学院数学与计算机科学系，衡水 053000 |
| |
| 基金项目： | 国家自然科学基金（51675458）；河北省自然科学基金重点项目（E2017203335）；河北省高等学校青年拔尖人才计划项目（BJ2017060） |
| |
| 摘 要： | 基于螺旋理论针对环形桁架式可展天线机构的构型综合问题进行研究，首先概述基于螺旋理论的约束综合法，然后分析环形桁架可展天线机构的收展原理，将环形桁架机构分为上下环形边两部分，通过综合环形边机构并连接上下环形边便可得到环形桁架机构；采用移动副(P)来描述各个节点花盘的运动特性，通过基于螺旋理论的约束综合法针对环形边支链机构进行分析与综合，得到了16种约束支链机构，通过分析与优选得到了两种约束支链机构；采用综合得到的约束支链机构组合得到了环形边链路机构并通过连接组合与推演得到了四种环形桁架可展开机构；最后针对综合得到的四种环形桁架机构在Solidworks软件中进行了三维建模与运动仿真，校验了各机构的可展性。本文的研究为可展天线机构的构型综合提供了一种新思路，综合得到的几种环形桁架机构在空间可展开天线领域具有较好的应用前景。
|
| 关 键 词： | 环形桁架 可展天线 构型综合 螺旋理论 |
| 收稿时间： | 2019-01-21 |
Type Synthesis of Ring Truss Deployable Antenna Mechanism Based on Screw Theory |
| |
| HAN Bo,XU Yun dou,HAN Yuan yuan,YAO Jian tao,ZHAO Yong sheng.Type Synthesis of Ring Truss Deployable Antenna Mechanism Based on Screw Theory[J].Journal of Astronautics,2019,40(7):831-841. |
| |
| Authors: | HAN Bo XU Yun dou HAN Yuan yuan YAO Jian tao ZHAO Yong sheng |
| |
| Affiliation: | 1. Parallel Robot and Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao 066004, China; 2.Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of Education,Yanshan University, Qinhuangdao 066004, China; 3. Department of Mathematics and Computer Science,Hengshui University, Hengshui 053000, China |
| |
| Abstract: | Based on the screw theory, the type synthesis of the ring truss deployable antenna mechanism is studied. Firstly, the constrained synthesis method based on the screw theory is briefly introduced, and the deployment principle of the ring truss deployable antenna mechanism is analyzed. Then, the ring truss mechanism is divided into two parts, the upper ring edge and the lower ring edge, the ring truss mechanism can be obtained by constructing the ring edge mechanisms and connecting the upper and lower ring edges. Furthermore, the prismatic joint (P) ARE used to describe the movement characteristics of each node, the analysis and synthesis of the ring edge mechanisms are carried out by the constraint synthesis method based on the screw theory, 16 kinds of constraint branch mechanisms are obtained, and two kinds of constraint branch mechanisms are selected through analysis and optimization. The ring edge link mechanisms are obtained by combining the constraint branch mechanisms, and four ring truss deployable mechanisms are obtained through different connection combinations. Finally, three-dimensional models are built in Solidworks software for the four kinds of ring truss deployable mechanisms, and the deployable features of the four mechanisms are verified by the movement simulation. The research provides a new idea for the synthesis of the deployable antenna mechanisms, and the ring truss mechanisms obtained have a good application prospect in the field of space deployable antenna. |
| |
| Keywords: | Ring truss Deployable antenna Type synthesis Screw theory |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《宇航学报》浏览原始摘要信息 |
|
点击此处可从《宇航学报》下载全文 |
|
