| 铣削加工参数对SiCp/Al复合材料表面粗糙度的影响 |
| |
| 引用本文： | 唐玲艳,牛秋林,李鹏南,刘晓,邱新义.铣削加工参数对SiCp/Al复合材料表面粗糙度的影响[J].宇航材料工艺,2017,47(6):64-68. |
| |
| 作者姓名： | 唐玲艳 牛秋林 李鹏南 刘晓 邱新义 |
| |
| 作者单位： | 湖南科技大学机电工程学院, 湘潭 411201,湖南科技大学机电工程学院, 湘潭 411201,湖南科技大学机电工程学院, 湘潭 411201,上海航天设备制造总厂, 上海 200240,湖南科技大学机电工程学院, 湘潭 411201 |
| |
| 基金项目： | 国家自然科学基金（51275168，51305134）、国家自然科学基金青年项目（51605161）；湖南省自然科学基金（2015JJ5028）；难加工材料高效精密加工湖南省重点实验室开放基金（E21639） |
| |
| 摘 要： | 文摘SiC_p/Al复合材料在切削加工中存在严重的表面质量问题。本文设计单因素试验,采用硬质合金涂层刀具对SiC_p/Al复合材料进行铣削加工,研究了加工参数对表面粗糙度的影响。结果表明:表面粗糙度随切削速度的增大先增大后减小,随进给量、径向切深、轴向切深的增大而增大;使用较大的切削速度、较小的进给量和不大于4 mm的径向切深能获得较好的加工表面质量。
|
| 关 键 词： | SiCp/Al复合材料 加工参数 表面粗糙度 表面形貌 |
| 收稿时间： | 2017/5/4 0:00:00 |
| 修稿时间： | 2017/6/15 0:00:00 |
Influence of Cutting Parameters on Surface Roughness of Mided SiCp/Al Composites |
| |
| TANG Lingyan,NIU Qiulin,LI Pengnan,LIU Xiao and QIU Xinyi.Influence of Cutting Parameters on Surface Roughness of Mided SiCp/Al Composites[J].Aerospace Materials & Technology,2017,47(6):64-68. |
| |
| Authors: | TANG Lingyan NIU Qiulin LI Pengnan LIU Xiao and QIU Xinyi |
| |
| Affiliation: | College of Electrical and Mechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201,College of Electrical and Mechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201,College of Electrical and Mechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201,Shanghai Aerospace Equipment Manufacture Factory, Shanghai 200240 and College of Electrical and Mechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201 |
| |
| Abstract: | There are serious problems in surface quality of the mided SiCp/Al composites. The milling tests on SiCp/Al composites were conducted with cemented carbide coating tools. Through single factor experiment, the article investigated the influence of cutting parameters on surface roughness.The results suggest that the surface roughness increases at first, then decreases with the increase of cutting speed, and increases with the increase of feed, radial cutting depth and axial cutting depth. The machined surface quality could be improved by using high cutting speed, low feed and the radial cutting depth equal or less than 4mm. |
| |
| Keywords: | SiCp/Al composites Cutting parameter Surface roughness Surface morphology |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《宇航材料工艺》浏览原始摘要信息 |
|
点击此处可从《宇航材料工艺》下载全文 |
|
