缝隙-腔体密封结构在高速气流冲击下的整体流动、传热特性分析

doi:CNKI:11-1929/V.20110615.1322.005

流体力学与飞行力学

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

缝隙-腔体密封结构在高速气流冲击下的整体流动、传热特性分析

沈淳¹, 夏新林¹, 曹占伟², 于明星²

1. 哈尔滨工业大学能源科学与工程学院, 黑龙江哈尔滨 150001;
2. 北京临近空间飞行器系统工程研究所, 北京 100076

收稿日期:2011-04-18 修回日期:2011-05-06 出版日期:2012-01-25 发布日期:2012-01-16
通讯作者: 夏新林 E-mail:xiaxl@hit.edu.cn
作者简介:沈淳男,博士研究生.主要研究方向: 相间耦合传热、传质. Tel: 0451-86412148 E-mail: shenchun390@sina.com
夏新林男,博士,教授,博士生导师.主要研究方向: 热辐射、辐射-对流-相变耦合换热、红外特性与传输. Tel: 0451-86412148 E-mail: xiaxl@hit.edu.cn
基金资助:
国家自然科学基金(90816022)

Analysis of Flow and Heat Characteristics of Seal Structure with Gap and Cavity Under the Impact of High Speed Airflow

SHEN Chun¹, XIA Xinlin¹, CAO Zhanwei², YU Mingxing²

1. School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;
2. Beijing Institute of Nearspace Vehicles System Engineering, Beijing 100076, China

Received:2011-04-18 Revised:2011-05-06 Online:2012-01-25 Published:2012-01-16

摘要/Abstract

摘要： 根据高马赫数流场特征参数变化快、固态场特征参数变化慢的特性,编制开发了针对高速气流的"半解耦"显式流固耦合近似计算程序,并通过数值方法分析了该方法的计算误差,分析结果显示其能够较准确地模拟高速流场与固态场长时间非稳态耦合问题.在此基础上,运用"半解耦"流固耦合方法数值模拟了高速气流横掠缝隙-腔体典型密封结构的非稳态过程,并与相关实验测试数据进行了对比,验证了程序可靠性.随后,进一步分析了气流侵入密封结构的主要特性,总结了密封结构内、外流场中气流温度、压力和速度的分布特征以及其随时间的变化规律,研究了密封结构中加热板气动热流随时间的变化规律,探讨了密封结构中固体温度场分布特征及其随时间积累的变化规律等.最终,计算结果说明了密封体的结构布局对其内部热状况的决定性影响.

关键词: 流固耦合, 高速气流, 数值模拟, 密封结构, 非稳态过程

Abstract: In view of the fact that the characteristic parameters of a high Mach flow field vary much faster than those of the solid field, a program of approximate numerical simulation of the semi-decomposd fluid and solid coupling is developed and compiled. The calculating error of the method is analyzed by numerical simulation, and the results show that this method can accurately simulate the fluid and solid coupling in a high speed airflow field during a long unsteady process. The process of a high speed airflow impacting the seal structure is simulated by this method and the program is proved to be feasible after a comparison of the calculated results with the related experimental test. And then the features of the airflow invading the seal structure are analyzed. The contours of the flow field temperature, pressure and velocity inside and outside the seal structure and the their variation during the course of an unsteady process are summarized. The variation of the aerodynamic heat flux of the heating board with time is analyzed. The rules of the temperature variation of the seal structure with time are investigated. Finally, the results show that the structural layout of the seal plays a decisive role in the seal structure's thermal conditions.

Key words: fluid and solid coupling, high speed airflow, numerical simulation, seal structure, unsteady process

中图分类号:

V211

沈淳, 夏新林, 曹占伟, 于明星. 缝隙-腔体密封结构在高速气流冲击下的整体流动、传热特性分析[J]. 航空学报, 2012, 33(1): 34-43.

SHEN Chun, XIA Xinlin, CAO Zhanwei, YU Mingxing. Analysis of Flow and Heat Characteristics of Seal Structure with Gap and Cavity Under the Impact of High Speed Airflow[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, 33(1): 34-43.

参考文献

[1] Chuppb R E, Prior R J, Loewenthal R G, et al. Advanced seal development for large industrial gas turbines. AIAA-1997-2731, 1997.

[2] Paolillo R, Clouds D, de Jong F, et al. Advanced seal rig experiments and analysis. AIAA-2005-4150, 2005.

[3] Delgado I R, Proctor M P. Continued investigation of leakage and power loss test results for competing turbine engine seals. AIAA-2006-4754, 2006.

[4] Su H. Structural design, performance analysis and tests of finger seal. Xi'an: Northwestern Ploytechnical University, 2006.(in Chinese) 苏华. 指尖密封结构和性能的设计分析与试验研究. 西安:西北工业大学, 2006.

[5] Wang X. A theoretical and experimental study for hydrostatic finger seal. Harbin: Harbin Engineering University, 2006. (in Chinese) 王旭. 流体静压型指尖密封的理论与试验研究. 哈尔滨: 哈尔滨工程大学, 2006.

[6] Stein S, Thiokol M. Seal material selection, design and performance-advancements from the space shuttle booster redesign. AIAA-1989-2774, 1989.

[7] Edward L, Palko J. High temperature seal energizer device development. AIAA-2005-3370, 2005.

[8] Schfer M. Numerical simulation of coupled fluid-solid problems. Computer Methods in Applied Mechanics and Engineering, 2001, 190(28): 3645-3667.

[9] Geng X R, Zhang H X, Shen Q, et al. Study on an integrated algorithm for the flowfields of high speed vehicles and the heat transfer in solid structures. Acta Aerodynamics Sinica, 2002, 20(4): 422-427. (in Chinese) 耿湘人, 张涵信, 沈清, 等. 高速飞行器流场和固体结构温度场一体化计算新方法的初步研究. 空气动力学报, 2002, 20(4): 422-427.

[10] He L, Oldfield M L G. Unsteady conjugate heat transfer modeling. Journal of Turbomachinery, 2011, 133(3): 031022-031033.

[11] Wu Z N. Aerodynamics. Beijing: Tsinghua University Press, 2008. (in Chinese) 吴子牛. 空气动力学. 北京:清华大学出版社, 2008.

[12] Zhang Z C. Hypersonic aerodynamic heating and thermal protection. Beijing: National Defence Industry Press, 2003. (in Chinese) 张志成. 高超声速气动热和热防护. 北京: 国防工业出版社, 2003.

[13] Shen Q. Rarefied gas dynamics. Beijing: National Defence Industry Press, 2003. (in Chinese) 沈青. 稀薄气体动力学. 北京: 国防工业出版社, 2003.

[14] Chen X. Kinetic theory of gases and its applications to the studies of heat transfer and fluid flow. Beijing: Tsinghua University Press, 1996. (in Chinese) 陈熙. 动力论及其在传热与流动研究中的应用. 北京: 清华大学出版社, 1996.

[15] Yan J L, Wang Y Q. Engineering thermodynamics. Beijing: China Electric Power Press, 2004. (in Chinese) 严家禄, 王永青. 工程热力学. 北京: 中国电力出版社, 2004.

[16] Ma C F. Practical handbook thermophysical properties. Beijing: China Agricultural Machinery Press, 1986. (in Chinese) 马重芳. 实用热物理性质手册. 北京: 中国农业机械出版社, 1986.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

缝隙-腔体密封结构在高速气流冲击下的整体流动、传热特性分析

Analysis of Flow and Heat Characteristics of Seal Structure with Gap and Cavity Under the Impact of High Speed Airflow

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	夏侯唐凡, 陈江涛, 邵志栋, 吴晓军, 刘宇. 随机和认知不确定性框架下的CFD模型确认度量综述[J]. 航空学报, 2022, 43(8): 25716-025716.
[2]	汪博, 高培鑫, 马辉, 孙伟, 林君哲, 李晖, 韩清凯, 刘中华. 航空发动机管路系统动力学特性综述[J]. 航空学报, 2022, 43(5): 25332-025332.
[3]	杨建凯, 顾冬冬, 葛庆, 檀晨晨, 文雨. 铝合金激光增材制造支撑布局及精确成形机制[J]. 航空学报, 2022, 43(4): 525331-525331.
[4]	姜有旭, 李杰, 杨钊. 某层流机翼验证机风洞试验数据修正方法[J]. 航空学报, 2022, 43(11): 526814-526814.
[5]	段俊亦, 童福林, 李新亮, 刘洪伟. 压缩-膨胀湍流边界层平均摩阻分解[J]. 航空学报, 2022, 43(1): 625915-625915.
[6]	刘朋欣, 袁先旭, 孙东, 傅亚陆, 李辰. 高温化学非平衡湍流边界层直接数值模拟[J]. 航空学报, 2022, 43(1): 124877-124877.
[7]	沈鹏飞, 刘朋欣, 孙东, 袁先旭. 马赫6柱-裙构型激波/湍流边界层干扰摩阻统计特性[J]. 航空学报, 2022, 43(1): 626005-626005.
[8]	刘朋欣, 袁先旭, 梁飞, 李辰, 孙东. 高温化学非平衡湍流边界层脉动量象限分析[J]. 航空学报, 2021, 42(S1): 726338-726338.
[9]	鲍俊, 王瑜, 牛潜, 朱锡冬, 程建杰. 喷雾液滴撞击液膜影响参数及流动机理分析[J]. 航空学报, 2021, 42(S1): 726360-726360.
[10]	陈崇沛, 梁剑寒, 关清帝, 高天运. 守恒型可压缩一维湍流方法及其在超声速标量混合层中的应用[J]. 航空学报, 2021, 42(S1): 726364-726364.
[11]	李青, 涂国华, 余钊圣, 林昭武, 李婷婷, 袁先旭. 惯性颗粒在非均匀加速流中的输运问题[J]. 航空学报, 2021, 42(S1): 726390-726390.
[12]	黄镜玮, 付维亮, 马国骏, 王国杰, 高杰. 受轮缘密封结构影响的1.5级涡轮封严流与主流的相互作用以及轮缘密封间流动干扰[J]. 航空学报, 2021, 42(7): 124549-124549.
[13]	李成成, 李芳, 杨斌, 王莹. 等离子体激励抑制喷管分离流动数值模拟[J]. 航空学报, 2021, 42(7): 124547-124547.
[14]	童明波, 陈吉昌, 李乐, 肖天航, 古彪, 董登科, 汪正中. 飞行器水载荷结构完整性数值模拟现状与展望-Part I:水上迫降和水上漂浮[J]. 航空学报, 2021, 42(5): 524530-524530.
[15]	刘宗兴, 刘军, 李维娜. 爆炸冲击载荷下典型机身结构动响应及破坏[J]. 航空学报, 2021, 42(2): 224252-224252.