Form grinding and experiment on segment topographic modification gear
-
摘要: 基于成形磨削的几何原理和机床运动学原理,提出了斜齿轮副的一种分段拓扑修形方法.通过改变齿顶和齿根处渐开线的发生线长度实现齿廓分段修形;给砂轮附加一个抛物线+直线的径向进给运动实现齿向分段修形.推导出基于成形磨削过程中拓扑修形齿面的计算公式,对修形齿面的边界进行了划分,建立成形磨齿机各伺服轴的运动方程.根据齿面的数值模拟结果,在五轴数控(CNC)成形磨齿机上进行磨削加工与在机拓扑测量,验证了成形法实现齿面拓扑修形的可行性. 对给定转速和负载工况下的齿轮箱进行加载试验,齿轮箱振动能量级幅值下降0.008dB,噪声减小约2dB.研究表明分段拓扑修形有利于降低齿轮传动振动和噪声.Abstract: Based on the form grinding method geometry theory and gear profile grinding machine kinematics principles gears, a segment topographic modification method of helical gear drives was proposed. Profile segment modification was achieved by changing length of involute occurrence line of invloute profile on the top and root of the tooth; longitudinal segment modification was achieved by attaching to a parabolic and linear radial feed motion when forming grinder is moving. The formula of topographic modification tooth flank was derived based on form grinding process, and the boundary of topographic modification tooth flank was divided and calculated to establish the equations of motion for every servo axis of form grinding machine. According to numerical simulation results of the tooth flank, machining on the five-axis computer numerical control (CNC) gear form grinding machine and on-machine topographic measurement can verify the feasibility of topological modification of tooth flank by the grinding method. Combined the given conditions of rotating speed and operating load gearbox loading experiment, the vibration energy level amplitude of gearbox is dropped 0.008dB and noise is reduced by about 2dB. The research results show that segment topographic modification is effective in reducing gear drives vibration and noise.
-
[1] 苏建新,邓效忠,任小中,等.基于数值模拟的内斜齿轮成形磨削砂轮修形方法[J].航空动力学报,2011,26(10):2388-2393. SU Jianxin,DENG Xiaozhong,REN Xiaozhong,et al.Grinding wheel dressing method for inner helical gear form grinding based on numerical simulation[J].Journal of Aerospace Power,2011,26(10):2388-2393.(in Chinese) [2] Litvin F L,Fuentes A.Gear geometry and applied theory[M].2nd ed.New York:Cambridge University Press,2004. [3] Shih Y P,Fong Z H.Flank correction for spiral bevel and hypoid gears on a six-axis CNC hypoid gear generator[J].Journal of Mechanical Design,2008,130(6):062604.1-062604.11. [4] Fan Q,DaFoe R S,Swanger J W.Higher-order tooth flank form error correction for face-milled spiral bevel and hypoid gears[J].Journal of Mechanical Design,2008,130(7):072601.1-072601.7. [5] Argyris J,Donno M D,Litvin F L.Computer program in visual basic language for simulation of meshing and contact of gear drives and its application for design of worm gear drive[J].Computer Methods Apply Mechanical Engineering,2000,189(2):595-612. [6] Lee C K.Manufacturing process for a cylindrical crown gear drive with a controllable fourth order polynomial function of transmission error[J].Journal of Materials Processing Technology,2009,209(1):3-13. [7] 王成,方宗德,贾海涛,等.人字齿轮修形优化设计[J].航空动力学报,2009,24(6):1432-1436. WANG Cheng,FANG Zongde,JIA Haitao,et al.Modification optimization of double helical gears[J].Journal of Aerospace Power,2009,24(6):1432-1436.(in Chinese) [8] 蒋进科,方宗德,苏进展,等.基于承载传动误差幅值最小的斜齿轮齿面修形优化设计[J].航空动力学报,2013,28(7):1637-1643. JIANG Jinke,FANG Zongde,SU Jinzhan,et al.Optimal design of modified helical gear tooth surfaces based on minimum amplitude of loaded transmission error[J].Journal of Aerospace Power,2013,28(7):1637-1643.(in Chinese) [9] 赵宁,郭辉,方宗德,等.直齿面齿轮修形及承载接触分析[J].航空动力学报,2008,23(11):2142-2146. ZHAO Ning,GUO Hui,FANG Zongde,et al.Modification and loaded contact analysis of spur face gears[J].Journal of Aerospace Power,2008,23(11):2142-2146.(in Chinese) [10] Yoshino H,Ikeno K.Error compensation for form grinding of gears[J].Transactions of the Japan Society of Mechanical Engineers:Series C,1991,57(543):3652-3655. [11] Kobayashi Y,Nishida N,Ougiya Y,et al.Tooth trace modification processing of helix gear by form grinding method[J].Transactions of the Japan Society of Mechanical Engineers:Series C,1995,61(590):4088-4093. [12] Kobayashi Y,Nishida N,Ougiya Y,et al.An estimation of grinding wheel setting error in helical gear processing by form grinding[J].Transactions of the Japan Society of Mechanical Engineers:Series C,1997,63(612):2852-2858. [13] 李国龙,李先广,刘飞,等.拓扑修形齿轮附加径向运动成形磨削中的砂轮廓形优化方法[J].机械工程学报,2011,47(11):155-162. LI Guolong,LI Xianguang,LIU Fei,et al.Method of profile optimization of a form grinding wheel for grinding with additional radial motion of topologically modified gear[J].Journal of Mechanical Engineering,2011,47(11):155-162.(in Chinese) [14] Shih Y P,Chen S D.A flank correction methodology for a five-axis CNC gear profile grinding machine[J].Mechanism and Machine Theory,2012,47(1):31-45. [15] Shih Y P,Chen S D.Free-form flank correction in helical gear grinding using a five-axis computer numerical control gear profile grinding machine[J].Journal of Manufacturing Science and Engineering,2012,134(4):041006.1-041006.3. [16] Litvin F L,Chen N X,Lu J,et al.Computerized design and generation of low-noise,helical gears with modified surface topology[J].Journal of Mechanical Design,1995,117(2A):254-261. [17] Litvin F L,Daniele V,Ken Y,et al.Reduction of noise of loaded and unloaded misaligned gear drives[J].Computer Methods Apply Mechanical Engineering,2006,195(41/42/43):5523-5536. [18] 唐进元,陈兴明,罗才旺.考虑齿向修形与安装误差的圆柱齿轮接触分析[J].中南大学学报:自然科学版,2012,43(5):1704-1709. TANG Jinyuan,CHEN Xingming,LUO Caiwang.Contact analysis of spur gears based on longitudinal modification and alignment errors[J].Journal of Central South University:Science and Technology,2012,43(5):1704-1709.(in Chinese)
点击查看大图
计量
- 文章访问数: 1819
- HTML浏览量: 10
- PDF量: 989
- 被引次数: 0