SolidWorks二次开发在燃面计算中的应用

熊文波; 刘宇; 谢侃; 廖慧

SolidWorks二次开发在燃面计算中的应用

1.
北京航空航天大学宇航学院, 北京 100191
2.
北京机电院高技术股份有限公司, 北京 100027

计量
- 文章访问数: 1508
- HTML浏览量: 1
- PDF量: 452
- 被引次数: 0
出版历程
- 收稿日期: 2007-07-13
- 修回日期: 2007-11-23
- 刊出日期: 2008-08-28

Application of SolidWorks API of grain burning surface calculation

1.
School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2.
Beijing Machinery and Electricity Institute Limited Company, Beijing 100027, China

摘要

摘要: 以SolidWorks二次开发接口为基础,探讨了参数化设计在固体火箭发动机装药燃面计算中的应用.通过不同的药柱建模方法实现了固体药柱的装药计算,发展了一种更为简单准确的燃面计算方法.计算结果表明,理论计算和试验结果吻合得较好,能够较好地模拟固体药柱的燃烧过程,可以满足工程计算上的需要,为固体装药的燃面计算提供了新的思路和方法.
- 固体火箭发动机 /
- 装药计算 /
- SolidWorks二次开发
Abstract: The application of parameterization in grain burning surface calculation of solid rocket motor was investigated based on SolidWorks application programming interface.Asimpler and more accurate grain burning surface calculation method was developed while grain burning surface calculation was achieved through different modeling methods for the burning process of grain.The results show that this calculation method is feasible and highly precise.The calculation results match the experiment results,so this calculation method is suitable for actual engineering calculation.Some new ideas and methods for grain burning surface calculation were also proposed.
- solid rocket motor /
- grain burning surface calculation /
- second exploitation of SolidWorks

HTML

参考文献(8)

[1]	王元有.固体火箭发动机设计[M].北京:国防工业出版社,1984.
[2]	Dunn S S,Coats D E.3-D grain design and ballistic analysis using the SPP97 code[R].AIAA-3340,1997.
[3]	江洪,魏峥.SolidWorks2003二次开发基础与实例教程[M].北京:电子工业出版社,2003.
[4]	于胜春,赵汝岩,周红梅,等.基于Pro/E特征造型技术的固体发动机装药燃面计算[J].固体火箭技术,2005,28(2):108-111.YU Shengchun,ZHAO Ruyan,ZHOU Hongmei,et al.Burning area regression simulation and calculation of solid rocket motor grains based on Pro/E feature modeling technology[J].Journal of Solid Rocket Technology,2005,28(2):108-111.(in Chinese)
[5]	董新刚,陈林泉,侯晓.基于PRO/E平台下的同发装药CAD软件[C]//2002年中国宁航学会固体推进专业委员会年会论文集(上).昆明:中国宇航学会,2002:109-114.
[6]	杨石林,富婷婷,李健,等.基于SolidWorks平台嵌金属丝药柱装药计算[C]//中国宇航学会固体火箭推进第22届年会论文集.成都:中国宇航学会,2005:62-65.
[7]	熊文波,刘宇,杨劲松,等.基于SolidWorks二次开发的嵌金属丝药柱燃面计算[J].北京航空航天大学学报,2007,33(12):1400-1403.XIONG Wenbo,LIU Yu,YANG Jinsong,et al.Burning Surface calculation for grain embedded metal wires based on SolidWorks API[J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(12):1400-1403.(in Chinese)
[8]	熊文波,刘宇,杨劲松,等.某嵌金属丝药柱主要装药设计参数的影响[J].固体火箭技术,2008,31(1):38-42.XIONG Wenbo,LIU Yu,YANG Jinsong,et al.Effects of main grain design parameters of an embedded metalwire grain[J].Journal of Solid Rocket Technology,2008,31 (1):38-42.(in Chinese)