涡轮平面叶栅非轴对称端壁优化设计

唐慧敏; 刘帅强; 罗华玲

doi:10.13224/j.cnki.jasp.2015.03.023

涡轮平面叶栅非轴对称端壁优化设计

doi: 10.13224/j.cnki.jasp.2015.03.023

中国航空工业集团公司商用航空发动机有限责任公司研发中心, 上海 200241

基金项目:

上海市科学技术委员会科研计划(13521101100)

详细信息

作者简介:
唐慧敏(1984-),女,河南安阳人,工程师,硕士,主要从事涡轮气动设计工作.

中图分类号: V231;TK263
计量
- 文章访问数: 1313
- HTML浏览量: 3
- PDF量: 834
- 被引次数: 0
出版历程
- 收稿日期: 2013-09-02
- 刊出日期: 2015-03-28

Optimal design of profiled endwall for turbine cascade

Research and Development Center, Commercial Aircraft Engine Company Limited, Aviation Industry Corporation of China, Shanghai 200241, China

摘要

摘要: 开发了一套造型灵活直观、网格生成速度快的涡轮平面叶栅非轴对称端壁优化设计工具,该工具的核心技术是非均匀有理B样条(NURBS)曲面造型和网格变形.在此基础上以商业软件Isight为优化驱动器,以CFX为求解器,搭建了非轴对称端壁优化设计流程.以Pack B涡轮平面叶栅为例,对其进行了非轴对称端壁优化设计.优化后涡轮平面叶栅总压损失系数减小了12.96%.结果表明:涡轮平面叶栅端部的静压分布改变削弱了涡轮平面叶栅通道中马蹄涡、通道涡的强度,提高了涡轮平面叶栅的气动性能.
- 涡轮平面叶栅 /
- 非轴对称端壁 /
- 优化设计 /
- 非均匀有理B样条曲面 /
- 网格变形
Abstract: A method based on non-uniform rational B-spline (NURBS) surface technique coupled with mesh deforming technique was developed to design the profiled endwall for turbines cascade. This method has the advantages of flexible geometry representation and automatic rapid remeshing. An optimal design procedure of profiled endwall has been developed by integrating the commercial CFX solver and the optimization driver Isight. This procedure was applied to optimal design the profiled endwalls of Pack B turbine cascade. The total pressure loss coefficient of turbine cascade was reduced by 12.96% after optimization. The results show that the static pressure field on the endwall of turbine cascade is changed, so the horseshoe vortex and the passage vortex in turbine cascade passage are weakened. Therefore, the aerodynamic performance of the turbine cascade is improved.
- turbine cascade /
- profiled endwall /
- optimal design /
- non-uniform rational B-spline /
- mesh deforming

HTML

参考文献(20)

[1]	Denton J.Loss mechanisms in turbomachines[J].Journal of Turbomachinery,1993,115(4):621-656.
[2]	Sharma O P,Butler T L.Predictions of endwall losses and secondary flows in axial flow turbine cascades[J].Journal of Turbomachinery,1987,109(2):229-236.
[3]	Sieverding C H.Recent progress in the understanding of basic aspects of secondary flows in a turbine blade cascade[J].Journal of Engineering Gas Turbines and Power,1985,107(2):248-257.
[4]	Gregory-Smith D G.Secondary and tip-clearance flows in axial turbines[R].Belgium:Von Karman Institute for Fluid Dynamics,1997.
[5]	Langston L S.Secondary flows in axial turbines:a review[R].New York:Annals of New York Academy of Sciences,2001.
[6]	Rose M G.Non-axisymmetirc endwall profiling in the HP NGVs of an axial flow gas turbine[R].ASME Paper GT1994-249,1994.
[7]	Ingram G L,Gregory-Smith D G,Rose M G,et al.The effect of end-wall profiling on secondary flow and loss development in a turbine cascade[R].ASME Paper GT-2002-30339,2002.
[8]	Yan J,Gregory-Smith D G,Walker P J.Secondary flow reduction in a nozzle guide vane cascade by non-axisymmetirc end-wall profiling[R].ASME Paper GT-1999-339,1999.
[9]	Praisner T J,Allen-Bradley E,Grover E A.Application of non-axisymmetirc endwall contouring to conventional and high-lift turbine airfoil[R].ASME Paper GT-2007-27579,2007.
[10]	Hartland J C,Gregory-Smith D G,Harvey N W,et al.Non-axisymmetric turbine end wall design:Part Ⅱ experimental validation[J].Journal of Turbomachinery,2000,122(2):286-293.
[11]	Brennan G,Harvey N W,Rose M G,et al.Improving the efficiency of the trent 500 HP turbine using non-axisymmetric endwall:Part 1 turbine design[J].Journal of Turbomachinery,2003,125(3): 497-504.
[12]	Rose M G,Harvey N W,Seaman P,et al.Improving the efficiency of the trent 500 HP turbine using non-axisymmetric endwall:Part 2 experimental validation[R].ASME Paper 2001-GT-0505,2001.
[13]	Harvey N W,Brennan G,Newman D A,et al.Improving turbine efficiency using non-axisymmetric endwall:validation in the multi-row environment and with low aspect ratio blading[R].ASME Paper 2002-GT-30337,2002.
[14]	Gonzalez P,Lantero M.Low pressure turbine design for Rolls-Royce Trent 900 trubofan[R].ASME Paper 2006-GT-90997,2006.
[15]	Havrey N W,Rose M G,Taylor M D,et al.Non-axisymmetric turbine endwall design:Part 1 three-dimensional linear design systerm[R].ASME Paper 1999-GT-337,1999.
[16]	李国君,任光辉,马晓永,等.叶栅非轴对称端壁成型技术的初步研究[J].工程热物理学报,2006,27(1):97-100. LI Guojun,REN Guanghui,MA Xiaoyong,et al.The preliminary study of non-axisymmetric end wall design in a cascade[J].Journal of Engineering Thermophysics,2006,27(1):97-100.(in Chinese)
[17]	高增珣,高学林,袁新.透平叶栅非轴对称端壁的气动最优化设计[J].工程热物理学报,2007,28(4):589-591. GAO Zengxun,GAO Xuelin,YUAN Xin.Aerodynamic optimal design of non-axisymmetric endwall for a turbine cascade[J].Journal of Engineering Thermophysics,2007,28(4):589-591.(in Chinese)
[18]	Knezevici D C,Sjolander S A,Praisner T J,et al.Measurements of secondary loss in a turbine cascade with the implementation of non-axisymmetric endwall contouring[R].ASME Paper 2008-GT-51311,2008.
[19]	Bagshaw D A,Ingram G L,Gregory-Smith D G,et al.The design of three-dimensional turbine blades combined with profiled endwalls[J].Power and Energy,2008,222(1):93-102.
[20]	Torre D,Vazquez R,Rosa B E,et al.A new alternative for reduction of secondary flow in low pressure turbines[R].ASME Paper 2006-GT-91002,2006.