考虑导热对流和辐射作用的轴对称收扩喷管壁温计算

刘友宏; 李江宁; 才娟

考虑导热对流和辐射作用的轴对称收扩喷管壁温计算

1.
北京航空航天大学能源与动力工程学院, 北京 100083
2.
沈阳发动机设计研究所, 沈阳 11001

计量
- 文章访问数: 1749
- HTML浏览量: 1
- PDF量: 491
- 被引次数: 0
出版历程
- 收稿日期: 2007-09-28
- 修回日期: 2007-12-10
- 刊出日期: 2008-04-28

Wall temperature calculation on an axi-symmtrical converging-diverging nozzle considering heat conduction,convection and radiation

1.
School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
2.
Shenyang Aeroengine Design and Research Institute, Shenyang 110015, China

摘要

摘要: 基于N-S方程求解了包括引射流、加力燃烧室在内的轴对称收扩喷管内外流一体化的流场,建立了考虑导热、对流换热和辐射换热作用的轴对称收扩喷管各层壁温分布的计算模型,包括隔热屏、喷管简体、外调节片三层结构.对某航空发动机进行了多工况计算,燃气的物性随压力、温度和油气比的变化采用了一系列精度较高的计算公式和计算方法.计算结果表明:基于密度求解器求解包含引射流在内的轴对称收扩喷管内外流一体化的跨声速流场是成功的.隔热屏和收扩喷管筒体沿流向温度逐渐升高,喷管筒体壁温在喉部达到最大,在扩张段逐渐降低;收扩喷管外调节片壁温与收扩喷管简体的壁温变化规律相同,但是壁温最大值则位于喉部前某一位置.计算结果与经过试验验证程序的结果符合良好.
- 航空、航天推进系统 /
- 收扩喷管 /
- 跨声速流场 /
- 壁温 /
- 辐射换热 /
- 导热 /
- 对流换热
Abstract: The flow field and the wall temperature distribution calculation models on a converging-diverging nozzle considering the heat conduction,heat convection and radiation heat transfer are established and computed.The flow field is governed by the Navier-Stokes equations and the equations are solved based on the density solver.The wall temperature distribution calculation model is based on the heat transfer mechanism and the heat flux equilibrium.And the corresponding FORTRANprograms for the three layer wall temperature calculation of the nozzle are written.Many flight cases are calculated in which the properties of the burning gas mixture are calculated by a series of formulas and methods considering them varied with the pressure,the temperature and the ratio of oil to air.The results show that the heat shield temperature and the converging-diverging nozzle cylindrical wall temperature increase along the flow direction and decrease in the expand segment of the nozzle.The maximum wall temperature happens around the nozzle throat position.The outer adjustment plate temperature outside of the nozzle cylinder reaches its maximum some little before the nozzle throat position.The best agreement between the calculation and the given data can be observed in the paper.
- aerospace propulsion system /
- converging-diverging nozzle /
- transitional sonic flow field /
- wall temperature /
- radiative heat transfer /
- heat conduction /
- convective heat transfer

HTML

参考文献(17)

[1]	张小英,朱谷君,王先炜.矢量喷管壁温分布的数值计算研究[J].航空动力学报,2003,18(5):634-638.ZHANG Xiaoying,ZHU Gujun,WANG Xianwei.Numerical study of temperature distribution on vectored nozzle wall[J].Journal of Aerospace Power.2003,18(5):634-638.
[2]	刘友宏,邵万仁,张锦绣.发动机排气系统及尾喷流的流场和红外特征数值模拟[J].航空动力学报,2008,23(4):591-597.LIU Youhong,SHAO Wanren,ZHANG Jinxiu.Numerical simulation of flowfield and infrared characteristics of an aeroengine exhaust system and its plume[J].Journal of Aerospace Power,2008,23 (4):591-597.
[3]	Barth T J,Jespersen D.The design and application of up wind schemes on unstructured meshes[R].AIAA-890366,1989.
[4]	Holmes D G,Connell S D.Solution of the 2D Navier-Stokes equations on unstructured adaptive grids[R].Presented at the AIAA 9th Computational Fluid Dynamics Conference,June,1989.
[5]	Rauch R D,Batira J T,Yang N T Y.Spatial adaption procedures on unstructured meshes for accurate unsteady aerodynamic flow computations[R].AIAA-91-1106,1991.
[6]	Menter F R.Two-equation eddy-viscosity turbulence models for engineering applications[J].AIAA Journal,1994,32(8):1598-1605.
[7]	《航空发动机设计手册》总编委员会.航空发动机设计手册[M].第1册,北京:航空工业出版社,2000.
[8]	张远君校编.流体力学大全[M].北京:北京航空航天大学出版社,1991.
[9]	Wilke C R.A viscosity equation for gas mixtures[J].Journal of Chemical Physics,1950,18:517.
[10]	杨世铭.传热学[M].北京:高等教育出版社,1980.
[11]	张小英,王先炜.比较研究多种气膜冷却模型的冷却效果[J].航空动力学报,2002,17(4):475-479.ZHANG Xiaoying,WANG Xianwei.Study on cooling effectiveness of various film coolings[J].Journal of Aerospace Power.2002,17(4):475-479.
[12]	Jubran B A,Maiteh B Y.Film cooling and heat transfer from a combination of two rows of simple and/or compound angle holes in inline and/or staggered configuration[J].Journal of Heat and Mass Transfer,1999,34 (6):495-502.
[13]	Goldstein R J,Stone L D.Row-of-holes film cooling ofcurved walls at low injection angles[J].Journal of Turbomachinery,1997,119(3):574-580.
[14]	葛绍岩,刘登瀛,徐靖中.气膜冷却[M].北京:科学出版社,1985.
[15]	Siegel R,Howell J R.Thermal radiation heat transfer[M].4th ed.New York:Taylor and Francis,2002.
[16]	Modest M F.Radiative heat transfer[M].2nd ed.New York:Academic Press,2003.
[17]	Lefebvre H.Heat transfer processes in gad turbine combustion chamber[J].Proceedings of the Institution of Mechanical Engineers,1961,175(12):641-668.