刚度随机失谐叶盘结构概率模态特性分析

王建军; 姚建尧; 李其汉

刚度随机失谐叶盘结构概率模态特性分析

北京航空航天大学能源与动力工程学院, 北京 100083

基金项目: 国家自然科学基金(10172014);航空科技基金(03C51032)

计量
- 文章访问数: 1415
- HTML浏览量: 4
- PDF量: 460
- 被引次数: 0
出版历程
- 收稿日期: 2007-01-18
- 修回日期: 2007-04-18
- 刊出日期: 2008-02-28

Probability characteristics of vibratory mode of bladed disk assemblies with random stiffness mistuning

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 基于典型叶盘结构的集中参数模型和Monte Carlo数值计算,分析了刚度随机失谐叶盘结构的概率固有特性.给出了叶盘结构的扇区两自由度集中参数模型,计算并说明了其基本频率结构特性,根据叶盘结构模态振动物理背景,提出了一个定量表征模态振型局部化程度的指标一模态局部化因子,分别计算了不同随机刚度失谐叶盘结构固有频率和模态振型局部化的统计特性,讨论了失谐因素的影响规律等.研究表明,叶片和耦合刚度的失谐影响的频率区间有着明显的不同,并在其影响频段内模态局部化因子会出现"突变"的现象.
- 航空、航天推进系统 /
- 叶盘结构 /
- 随机刚度失谐 /
- 概率振动模态特性 /
- 模态局部化因子
Abstract: Based on the lumped-parametric model with two-degree-of-freedom per blade disk sector and its Monte Carlo simulation,the vibration characteristics of a typical bladed disk with different random mistuning of stiffness was researched,with particular regard to the subjects of the probability characteristics of natural frequencies and shapes.Alumped-parametric model was built and the natural mode properties of the model without mistuning were discussed.The definition of a modal localization factor was presented to assess quantitatively the behavior of shape localization for the mistuned bladed disk.Then the statistical characteristics of the natural frequencies and mode shapes were simulated and their main properties were explained.Results indicate that the influences of blade and coupling stiffness mistuning on modal characteristics are distinct in that they influence in different frequency ranges.And the localization factor in the frequency ranges affected by mistuning could change abruptly.
- aerospace propulsion system /
- bladed disk /
- stiffness random mistuning /
- modal characteristics /
- localization factor

HTML

参考文献(9)

[1]	Srinivasan A.Flitter and resonant vibration characteristics of engine blades[J].ASME Eng Gas Turbine Power,1997,119(4):742-775.
[2]	Slater J C,Minkiewicz G R,Blair A J.Forced response of bladed disk assemblies-a survey[J].The Shock and Vibration Digest,1999,31(1):17-24.
[3]	王建军,李其汉,朱梓根.失谐叶片-轮盘结构系统振动局部化问题的研究进展[J].力学进展,2000,30(4):517-528.WANG Jianjun,LI Qihan,ZHU Zigen.Vibratory localization of mistured bladed disk assemblies-a review[J].Adnces in Mechanics,2000,30(4):517-528.
[4]	王建军,许建东,李其汉.失谐叶片-轮盘结构振动局部化的分析模型[J].汽轮机技术,2004,46(4):256-259.WANG Jianjun,XU Jiandong,LI Qihan.Analytical models mistuned blade disk assembles-a review[J].Turbine Technology,2004,46(4):256-259.
[5]	Lin C,Mignolet M.An adaptive perturbation scheme for the analysis of mistuned bladed disks[J].ASME Journal of Engineering for Gas Turbine and Power,1997,119:153-160.
[6]	Mignolet M P,Lin C C,LaBorde B H.A novel limit distribution for the analysis of randomly mistuned bladed disks[J].ASME Journal of Engineering for Gas Turbine and Power,2001,123:388-394.
[7]	Sinha A.Computation of the statistics of forced response of a mistuned bladed disk assembly via polynomial chaos[R].GT2003-38961,Proceedings of ASME Turbo Expo,Atlanta,GA:2003.
[8]	Rotea M,Fernando D A.New tools for analysis and optimization of mistuned bladed disks[R].AIAA-2002-4081,2002.
[9]	涂杰.谐调和失谐叶盘结构实验件振动模态特性实验与分析[D].北京:北京航空航天大学,2007.