直升机/粒子分离器一体化流场特性: 第二部分 桨盘载荷的影响

黄河峡; 曾平君; 谭慧俊; 杜沫辰; 孙 姝; 陈 伟; 李光胜

doi:10.13224/j.cnki.jasp.2014.04.017

直升机/粒子分离器一体化流场特性: 第二部分桨盘载荷的影响

doi: 10.13224/j.cnki.jasp.2014.04.017

1. 南京航空航天大学能源与动力学院,南京 210016;
2. 南京航空航天大学民航/飞行学院,南京 210016

详细信息

作者简介:
黄河峡(1989-),男,湖南株洲人,博士生,主要从事发动机进排气技术研究.

中图分类号: V211.3
计量
- 文章访问数: 1331
- HTML浏览量: 3
- PDF量: 840
- 被引次数: 0
出版历程
- 收稿日期: 2013-02-25
- 刊出日期: 2014-04-28

Integrated flow field characteristics of helicopter/particle separator: Part 2 influence of rotor disk load

1. College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China;
2. College of Civil Aviation, Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China

摘要

摘要: 采用等效盘模型与全三维黏性仿真相结合的方法,对旋翼下洗流干扰下直升机/粒子分离器的一体化流场特性进行了仿真研究.验证了ROBIN(rotor body interaction)模型,对类“阿帕奇”直升机/粒子分离器进行了大、小前进比时不同桨盘载荷下的一体化流场特性仿真,并对比了一体化条件、孤立条件下粒子分离器工作特性差异.结果表明:小前进比时下洗流对粒子分离器进口的分离流结构影响较大,且下洗流携带动能的叠加使得一体化条件下扫气流出口的总压损失反而比独立粒子分离器低;较大前进比状态下,下洗流干扰使得齿轮箱外罩鼓包后的分离区位置向两侧偏移,范围相比无桨盘载荷状态有所扩大,不过其对粒子分离器气动性能参数的影响并不明显.
- 直升机 /
- 粒子分离器 /
- 一体化 /
- 桨盘载荷 /
- 流场特性
Abstract: Integrated flow field characteristics of helicopter/particle separator under the interference of rotor downwash flow were studied by combination of the actuator disk model combining three dimensional viscosity simulations.Firstly,the ROBIN (rotor body interaction) experiment model was used to check the validity of the numerical methods,then an Apache-like helicopter with different rotor disk loads under different advance ratios were investigated.Finally some comparisons between the integrated flow and the independent flow of particle separator were made.The results show that rotor downwash flow has much more influence on separated flow characteristics of particle separator at lower advance ratio and the total pressure loss of scavenge exit is reduced under the downwash flow environment.At higher advance ratio,compared to no disk load state, the separation section upstream the gear box moves to the sides and becomes bigger while the performance of particle separator changes little when the separator operated in the downwash environment.
- helicopter /
- particle separator /
- integration /
- rotor disk load /
- flow field characteristics

HTML

参考文献(16)

[1]	Vittal B V R,Tipton D L,Bennett W A.Development of an advanced vaneless inlet particle separator for helicopter engines[J].Journal of Propulsion and Power,1986,2(5):438-444.
[2]	Zedan M,Mostafa A,Hartman P,et al.Viscous flow analysis of advanced particle separators[J].Journal of Propulsion and Power,1992,8(4):843-848.
[3]	Saeed F,Al-Garni A Z.Analysis method for inertial particle separator[J].Journal of Aircraft,2007,44(4):1150-1158.
[4]	Al-Faris E F,Saeed F.Design and optimization method for inertial particle separator systems[J]Journal of Aircraft,2009,46(6):1919-1929
[5]	李国立,王锁芳.直升机发动机的进气防护[M].北京:国防工业出版社,2009.
[6]	叶静,胡柏安,熊焰.涡轴发动机无叶片粒子分离器流道设计[J].现代机械,2007(2):39-42. YE Jing,HU Boan,XIONG Yan.Flow path design of vaneless particle separator for turbo shaft engine[J].Modern Machinery,2007(2):39-42.(in Chinese)
[7]	侯凌云,严传俊.二维粒子分离器的流场及分离效率的数值模拟[J].航空动力学报,1997,12(4):374-376. HOU Lingyun,YAN Chuanjun.Numerical simulation of two-dimensional flowfield in particle separator[J].Journal of Aerospace Power,1997,12(4):374-376.(in Chinese)
[8]	侯凌云,严传俊.分区多重网格法在复杂区域中的数值研究[J].推进技术,2000,21(1):54-56. HOU Lingyun,YAN Chuanjun.Numerical investigation of zonal multigrid method in complex regions[J].Journal of Propulsion Technology,2000,21(1):54-56.(in Chinese)
[9]	侯凌云,严传俊.直升机粒子分离器三维两相流场的数值模拟[J].航空动力学报,2000,15(2):215-217. HOU Lingyun,YAN Chuanjun.Numerical simulation of 3-D two-phase flowfield in inlet particle separator for helicopter[J].Journal of Aerospace Power,2000,15(2):215-217.(in Chinese)
[10]	侯凌云,严传俊.多区域多重网格法在直升机粒子分离器中的应用[J].航空学报,2000,21(3):238-240. HOU Lingyun,YAN Chuanjun.Application of multiblock/multigrid method to inlet particle separator in helicopter[J].Acta Aeronautica et Astronautica Sinica,2000,21(3):238-240.(in Chinese)
[11]	侯凌云.直升机粒子分离器两相流场的数值模拟 .西安:西北工业大学,1998. HOU Lingyun.Numerical simulation of two-phase flowfield in inlet particle separator for helicopter .Xian:Northwestern Polytechnical University,1998.(in Chinese)
[12]	Robert W,Micheal A T.Turbomeca starts examining Arriel turboshaft[J].International Aviation,2006(4):62-64.
[13]	胡利,曹义华,赵明.直升机旋翼机身发动机耦合流场数值模拟[J].航空动力学报,2008,23(10):1882-1887. HU Li,CAO Yihua,ZHAO Ming.Numerical simulation of helicopter rotor-fuselage-engine aerodynamic interactions[J]. Journal of Aerospace Power,2008,23(10):1882-1887.(in Chinese)
[14]	张海涛.直升机旋翼/发动机一体化建模研究 .南京:南京航空航天大学,2009. ZHANG Haitao.Integrated modeling of helicopter rotor-engine . Nanjing:Nanjing University of Aeronautics and Astronautics,2009.(in Chinese)
[15]	曾平君,孙姝,黄河峡,等.直升机/粒子分离器一体化流场特性研究:第一部分前进比的影响[J].航空动力学报,2014,29(4):858-866. ZENG Pingjun,SUN Shu,HUANG Hexia,et al.Integrated flow field of helicopter/particle separator:Part 1 influence of the advance ratio[J].Journal of Aerospace Power,2014,29(4):858-866.(in Chinese)
[16]	Duffy R J,Shattuck B F.Integral engine inlet particle separator: Volume Ⅱ design guide .USAAMRDLTR-75-31B,1975.